Kirby Air Control System, 5 manual Communications Wiring Schematics, Exploded Views & Parts Lists

Page 26

KMACS 5 MANUAL
# of Pulls	From Tender to Diver	From Diver to Tender

3	“Stand by to come up”	“Take up my slack”

4	“Come up”	“Haul me up

5.3 COMMUNICATIONS WIRING SCHEMATICS

If your KMACS has communications, refer to the radio manual

5.4 EXPLODED VIEWS & PARTS LISTS

The following parts are not shown on the blow apart drawing and are listed reference only.

Location	Part #	Description	Qty
Not Shown	420-100	Case, KMACS 5	1
Not Shown	405-039	Battery Charger Assembly	1

*The following parts in the interior plumbing require the use of Conical Seals, # 455-135. the conical seals are provided with the items listed below.

Location	Part #	Description
29	405-105	Inlet Tube, H.P. (blue)
31	405-105	Inlet Tube, H.P. (orange)
40	405-106	S .S. Tube Assembly, H. P.

20	© 2003 KMDSI Document # 041112001

Image 26

Contents Kirby Morgan Air Control System KmdsiThis page not used Definitions of Signal Words Used in this Manual Warranty Information Table of Contents Page Definitions Kmacs 5 Kirby Morgan Air Control SystemDesign Purpose Divers with all of the gear they need to diveLow Pressure Supply Pressure Maximum SpecificationsGeneral Description Principle Operating Features Breathing AIR SubsystemOrange AIR Supply Flow Indicator Lines LOW Pressure Inlet Fitting NYokes for High Pressure Cylinder Attachment S Blue Breathing AIR Supply Pressure Gauge MOrange Breathing AIR Supply Pressure Gauge L Case JPneumo Valve KNOB, White Diver Regulator Adjustment Knob for Umbilical Pressure HOutlet Manifold Including DIVER’S Umbilical Fittings G Pneumo Valve KNOB, RED DiverFirst USE of the Kmacs Connecting the AIR SupplyUnpacking the Kmacs Connecting DIVER’S Hoses to the Kmacs Testing L.P. Supply Suggested Regulator settings for the KmacsMetric Suggested Regulator settings for the Kmacs PRE-DIVE CheckTesting Communications Dive Supervisor and the Kmacs 5 Operator Testing the PneumoPreparing the Diver Descent Changing OUT High Pressure Cylinders Procedures During the DIVER’S AscentDiver AT Depth Decompression Completion of Diving OperationsRecommended Maintenance of the Kmacs Replacing the BatteryNo Communications Symptoms Probable Causes RemedyGeneral No AIR to Diver Symptoms Probable Cause RemedyNo Pneumo Reading Diver Line Pull Signals Emergency ProceduresProblem Action AppendixLocation Description Qty Communications Wiring SchematicsExploded Views & Parts Lists Location DescriptionKmacs 5 Exploded Views & Parts Lists Communications PanelPanel Mounted Plumbing and Gauges Interior Plumbing Arrangement Kmacs 5 Dive LOG Table of Equivalents