Kirby Air Control System manual Kmacs 5 Dive LOG

Page 30

KMACS 5 MANUAL

KMACS 5 DIVE LOG

Diver:								Date:

KMACS 5 Operator:
Dive Location:
Dive Location:

Weather Conditions:
Purpose of Dive:
Purpose of Dive:

Low Pressure Air Source Pressure:

High Pressure Air Source Pressure:

Cylinder #					Start		Finish
1			_______________________________
2			_______________________________
3			_______________________________
4			_______________________________
5			_______________________________
6			_________________________________

Dive Times:

Diver Left Surface: ________________
Diver Reached Bottom: ____________
Diver Left Bottom: ______________	Maximum Depth:
Diver Reached Surface:______________	Total Bottom Time:
Repetitive Group: ________________	Decompression Required?: Y	N

Decompression Schedule:________________________________________________

______________________________________________________________________

Diver’s Signature_____________________ KMACS 5 Operator _________________

24	© 2003 KMDSI Document # 041112001

Image 30

Contents Kirby Morgan Air Control System KmdsiThis page not used Definitions of Signal Words Used in this Manual Warranty Information Table of Contents Page Definitions Kmacs 5 Kirby Morgan Air Control SystemDesign Purpose Divers with all of the gear they need to diveSpecifications General DescriptionLow Pressure Supply Pressure Maximum Principle Operating Features Breathing AIR SubsystemOrange AIR Supply Flow Indicator Lines LOW Pressure Inlet Fitting NYokes for High Pressure Cylinder Attachment S Blue Breathing AIR Supply Pressure Gauge MOrange Breathing AIR Supply Pressure Gauge L Case JPneumo Valve KNOB, White Diver Regulator Adjustment Knob for Umbilical Pressure HOutlet Manifold Including DIVER’S Umbilical Fittings G Pneumo Valve KNOB, RED DiverConnecting the AIR Supply Unpacking the KmacsFirst USE of the Kmacs Connecting DIVER’S Hoses to the Kmacs Testing L.P. Supply Suggested Regulator settings for the KmacsMetric Suggested Regulator settings for the Kmacs PRE-DIVE CheckTesting Communications Testing the Pneumo Preparing the DiverDive Supervisor and the Kmacs 5 Operator Descent Procedures During the DIVER’S Ascent Diver AT DepthChanging OUT High Pressure Cylinders Decompression Completion of Diving OperationsRecommended Maintenance of the Kmacs Replacing the BatterySymptoms Probable Causes Remedy GeneralNo Communications Symptoms Probable Cause Remedy No Pneumo ReadingNo AIR to Diver Diver Line Pull Signals Emergency ProceduresProblem Action AppendixLocation Description Qty Communications Wiring SchematicsExploded Views & Parts Lists Location DescriptionKmacs 5 Exploded Views & Parts Lists Communications PanelPanel Mounted Plumbing and Gauges Interior Plumbing Arrangement Kmacs 5 Dive LOG Table of Equivalents