Intec 8940-20 manual Starting and Stopping Vacuum Cleaner

Page 6

Starting and Stopping Vacuum Cleaner

1.To turn vacuum cleaner on, turn the ON/OFF switch to the ON position.

2.To turn vacuum cleaner off, turn the ON/OFF switch to the OFF position.

NOTE: Switch will automatically return to the neutral position.

WARNING!

To reduce the risk of electric shock, do not direct discharge stream at vacuum cleaner.

Vacuuming Wet Materials Using Pump (Fig. 4 - 8)

1.Always unplug vacuum cleaner before removing the tank cover.

2.Remove the tank cover and dry pick-up filters. Tank should be cleaned of any dirt or debris.

3.Make sure the foam sleeve is properly installed for wet vacuuming (see “When Vacuuming Wet Materials”).

4.Insert the pump pick-up assembly's inlet fitting into the bottom of the motor housing on the tank cover. Rotate until the discharge hose lines up with the plug on the bottom of the tank cover (Fig. 4).

Fig. 4

plug

discharge hose

inlet fitting

5.Remove plug from discharge hole. Insert the discharge fitting and rotate clockwise to lock into place (Fig. 5).

NOTE: Do not cut the security loop which fastens the plug to the lid cage. The plug must be used for vacuuming dry materials.

Fig. 5

discharge fitting

6.Replace tank cover and secure with lid latches to the tank.

7.Connect a standard garden hose (not supplied) to the shut-off valve (Fig. 6).

Fig. 6

8.Before starting the pumping operation, check to see that the shut-off valve is in the OFF position (Fig. 7).

Fig. 7

ON

PRIMED

OFF

9.Attach the 1-1/4" vacuum hose to the tank inlet (Fig. 8).

Fig. 8

10.Plug in vacuum cleaner. Turn ON/OFF switch to ON position. NOTE: Switch will automatically return to the neutral position.

11.Start wet pick-up.

NOTE: To start the pumping feature, you will need approximately 4" of water in the bottom of the tank. At that time you can start the pump or continue with the standard wet pick-up until the tank has reached capacity. The vacuum cleaner will automatically shut off when full.

Removing Liquid from the Vacuum Cleaner Tank Using Pump

1.To empty a full tank by pumping, remove the vacuum hose from the liquid. The ON/OFF switch must be manually held in the ON position with the shut-off valve in the priming position.

NOTE: The vacuum hose must be attached to the vacuum cleaner in order to prime.

NOTE: If the vacuum cleaner fails to prime, restrict airflow to the vacuum by capping the end of hose.

2.Once the liquid begins to flow through the garden hose, the shut-off valve should be turned to the full ON position to achieve the maxi- mum flow. You will have to manually hold the ON/OFF switch in the ON position for approximately 10-15 seconds. This will allow the water level to reduce significantly. Pumping will continue automati-

page 6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Operators Manual General Safety Rules Read and Understand ALL Instructions Functionaldescription Tank Air Flow Sealed CatalogGrounding Guidelines for Using Extension CordsRecommended Minimum Wire Gauge For Extension Cords Extension CordsTool Assembly Installing Handle FigOperation Starting and Stopping Vacuum Cleaner Removing Liquid from the Vacuum Cleaner Tank Using PumpInstalling Filters Fig Removing Liquid from the Vacuum Cleaner Tank Without PumpFilter Cleaning and Changing Fig Vacuuming Dry MaterialsAccessories MaintenanceTWO Year Tool Limited Warranty Conservez CES Instructions Descriptionfonctionnelle Capacité du Débit Aspiration No deCordons DE Rallonge Calibres minimaux recommandés pour Les cordons de rallongeMise À LA Terre Avertissement Directives pour l’emploi des cordons de rallongeInstallation de la poignée Fig Montage DE Loutil AvertissementManiement Avertissement Démarrage et arrêt l’aspiratear Marche Amorçage FermePour évacuer les liquides de la cuve Nettoyage et changement des filtres FigAccessoires Avertissement Maintenance AvertissementGarantie Limitée DE L’OUTIL DE Deux ANS Guarde Estas Instrucciones Descripción Funcional Capacidad del Flujo de aire en Aspiración CatálogoTierra ¡ADVERTENCIA Extensiones ElectricasGuías para el uso de cables de extensión Ensambaje DE LA Herramienta ¡ADVERTENCIA Instalación del mango FigOperacion ¡ADVERTENCIA Cómo accionar y detener la aspriradoraAspirar materiales secos Para vaciar un tanque ileno mediante el bombeoCómo sacar el líquido del tanque de la aspiradora Limpieza y cambio del filtro FigMantenimiento ¡ADVERTENCIA Instalación de los filtros FigReparación Accesorios ¡ADVERTENCIA Garantía Limitada DE DOS AñosUnited States

8940-20 specifications

The Intec 8940-20 is a high-performance multifunctional printer that has gained recognition for its advanced features and innovative technologies. Designed for businesses that require efficiency, quality, and reliability, this device offers a seamless printing solution for a variety of professional applications.

One of the standout features of the Intec 8940-20 is its impressive printing speed. Capable of producing up to 40 pages per minute, this printer ensures that even the most demanding print jobs are completed in a timely manner. This efficiency is complemented by a high monthly duty cycle, enabling users to handle large volumes of printing without compromising on performance.

The Intec 8940-20 also prioritizes print quality, offering a maximum resolution of 1200 x 1200 dpi. This ensures that documents, presentations, and marketing materials are printed with exceptional clarity and precision. With advanced color management and precise toner formulation, users can count on vibrant colors and sharp text in every print.

In terms of connectivity, the Intec 8940-20 features versatile options that enhance its usability within a networked environment. It is equipped with USB, Ethernet, and wireless connectivity, allowing multiple users to share the printer easily and efficiently. Additionally, mobile printing capabilities enable users to print directly from their smartphones or tablets, facilitating a more flexible and productive work environment.

The device is also designed with user-friendliness in mind. Its intuitive control panel and touchscreen interface make navigation simple, allowing users to access functions quickly. Furthermore, the Intec 8940-20 supports a range of media types and sizes, from standard letter-sized paper to custom envelopes and labels, broadening its application spectrum.

Durability is another key characteristic of the Intec 8940-20. Constructed with robust components, it is designed to withstand the rigors of frequent use in busy office settings. Regular maintenance and easy-to-replace consumables further enhance its lifespan and reduce downtime.

In conclusion, the Intec 8940-20 stands out as a powerful multifunctional printer that blends speed, quality, and usability. Its advanced features and technologies make it an ideal choice for businesses looking to enhance their printing capabilities while ensuring reliability and efficiency in their operations.
Top Page Image Contents