Appendix Installation, Summery | Hisense Group KFR-3208GW instruction

Appendix: Installation

Warning: Carrying out operations displaying this

symbol may result in fatal injury.

Caution: Carrying out operations displaying this

symbol may result in serious injury.

This operation manual has explicit information for installation and maintenance in most conditions. Contact the local distributor or after-sales service for further information.

A. Wiring

Only qualified professionals should carry out wiring of the appliance.

Disconnect the power supply before completion of wiring, piping or checking the appliance.

Voltages generated by the appliance is fatal.

Read the electrical schematic diagram and explanation before installation. Improper installation and earth connection may result in fatal injury.

C onnect the earth as required by local wiring regulations.

Tightly fasten all the wiring connections to prevent overheating or fire.

Special power source, switches and sockets are required for the power supply of the appliance.

Electric meter capacity must be larger than or equivalent to 16A.

B. Transport

C arefully move the outdoor unit.

C. Installation

----When the appliance is mounted to the ceiling or the wall,

Make sure that the ceiling or the wall is strong enough for the appliance.

1. Summery

Read the operation manual before installation and keep this manual in a safe place.

1-1 Tools

1.Screwdriver

2.Phillips head screwdriver

3.Knife or wire stripper

4.Steel ruler

5.Spirit level

6.Hammer

7.Percussion drill

8.Tube cutter

9.Tube flarer

10.Tube bender

11.Adjustable spanner

1-2 Attachment

(see thepacking list)

1-3 Parts Package

Copper tubes, components and insulation materials for the outdoor unit.

1-4 Type of the copper tube and insulation materials

Make a wood or metal frame to support the appliance if necessary.

----When the appliance is mounted in a room,

Properly insulate the tube of indoor unit, and make sure there is no water drops on the appliance or on the floor.

----When the appliance is installed on a damp or uneven area,

Make a flat concrete base and place the base under the outdoor unit.

----When the appliance is installed in an area of strong winds.

U sing anchor bolts and metal frames to fix the properly covered outdoor unit.

----When the appliance (Model Heat Pump) is installed in an

area of heavy snow.

The outdoor unit must be installed in a position above the snow accumulation.

D. Connection

Use the shortest tubes possible

Using a flaring method

Smear some refrigeration oil between the flared surface and the connected tube.

Fa sten the nuts with a torque wrench to prevent leakage of refrigerant.

Check for leakage before trial operation.

E. Maintenance

Disconnect the power before checking the electrical components and the circuits.

Avoid contact with the moving parts of the appliance.

C lear the site and make sure there is no installation debris left in the appliance.

F. Other

Keep the room well ventilated during installation.

1.Following table indicates that tubes should be cut with an additional length of 30cm-40cm, to reduce the vibration from the outdoor unit.

Narrowtube		Widetube
Outside Diameter	Thickness	Outside Diameter	Thickness
6.35mm	0.8mm	9.52mm	0.8mm

2.The insulation materials for the copper tubes should conform to the required length and the wall thickness should not be less than 8mm.

3.Insulated copper wires should be used for wiring and the specification should depend on the length.

1-5 Additional materials for installation

1.white tape

2.nails or clips (as required)

3.putty

4.refrigeration oil

5.clips for fixing refrigerant tubes

KFR-3208GW specifications

Hisense Group, a key player in the global consumer electronics market, has made significant advancements in air conditioning technology with its model KFR-3208GW. Designed to meet the demands of both comfort and energy efficiency, this air conditioning unit stands out for its impressive blend of features and modern technologies.

One of the main features of the KFR-3208GW is its powerful cooling capability. With a cooling capacity of 3.2 kW, this unit can quickly lower indoor temperatures, making it ideal for residential and small commercial settings. The inverter technology integrated into the KFR-3208GW allows for precise temperature control while ensuring lower energy consumption, leading to substantial cost savings on electricity bills. This technology enables the compressor to adjust its speed according to the room temperature, thus maintaining a consistent climate without unnecessary energy spikes.

Another highlight of this air conditioning system is its Quiet Operation mode. The KFR-3208GW is designed to operate at low noise levels, making it suitable for bedrooms and other quiet environments. This is especially important for users who prefer a peaceful atmosphere for sleeping or working.

The air conditioning unit also features a multi-functional remote control, allowing users to effortlessly switch between the various modes such as cooling, heating, and dehumidification. The unit is equipped with a precise temperature sensor that ensures optimal performance and enhances user comfort.

Moreover, the KFR-3208GW is designed with advanced filtration systems that improve indoor air quality. The built-in filters are capable of capturing dust, allergens, and other airborne particles, contributing to a healthier living environment. This feature is particularly beneficial for individuals with respiratory issues or allergies.

In terms of installation, the KFR-3208GW offers flexibility, catering to different room layouts. Its compact design allows for easy wall mounting, making it an attractive option for space-constrained areas.

Overall, the Hisense Group KFR-3208GW air conditioning unit combines energy efficiency, cutting-edge technology, and user-friendly features, making it a desirable choice for those looking to enhance their indoor comfort while promoting a healthier atmosphere. As consumers continue to seek reliable and efficient cooling solutions, the KFR-3208GW is well positioned to meet these evolving needs.