Hisense Group KFR-3208GW instruction manual Installation of the indoor unit

Page 23

Appendix: Installation

3. Installation of the indoor unit

Remove the wall plate

(1)Remove the fixing screws and keep them for future use (not used during installation).

(2)Press the two triangular signs on the outer shell and remove the fixing clip.

(3)Remove the wall plate.

Mount the wall plate

(1)Determine the correct position of the plate with a level (never use the naked eyes!). The plate should be level.

(2)Fix the plate with §¶6mm expansion bolts for cement walls and with wood screws for wood or plaster walls.

Caution: Adequate space should be reserved for the installation of the indoor unit. To avoid running noise and vibration, the wall plate should be fixed tightly on the wall.

Make the wall hole

Select the position of the hole according to the positions of the indoor and outdoor units. The hole should be slightly lower than the wall plate.

The diameter of the hole is 65mm and the hole should be made with the outside end a little lower.

The site should be cleaned after the hole is made.

Caution: Check carefully before the hole is drilled to make sure that there is no cables or tubes in the area.

Wall plate

Fixing screw

Fixing clip

75

Right tube

75 hole center

Left tube

 

hole center

 

Indoor

Outdoor

Connect the tubes of the indoor unit

A. Connect the electric wires

(1)Open the front panel and remove the cover of the electric box. (2)Remove the wire clip in the electric box.

(3)Put in the wires from the back of the indoor unit and pull them out from the front.

(4)Connect the wires firmly to the terminal panel.

(5)Fix the wires with the clip, replace the cover and close the front panel.

Caution: Make sure that the numbers of the terminals are the same

as those of the terminal panel.

B. Connect the tubes

(1)Do not let dust, dirt, air and water into the tubes during installation, so never remove the tube plugs if installation is not due.

(2)Remove the nuts at the tube joints of the indoor unit, align the center of the tube flare (apply anti-freezing oil on the cone head), tighten the cone-shaped nuts with the hand first, then tighten up with a spanner.

Anti-freezing oil

is applied hereConnecting Flared

tubetube

Caution: Avoid leakage from loose connection or damage of the flare from over-tightening.

Set the outdoor unit

Set the indoor unit

21

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Instruction Manual Installation Compact Size Alert Symbols ContentsPage Composition of the Air Conditioner ON/OFF button Hipower lampPower lamp Timer lampSymbols Sleep button HR. Timer button High Power buttonTimer ON/OFF button TransmitterFAN Speed selector HR Timer buttonAutomatic switching between cooling and heating Flap buttonOperation Guide HOW to Install BatteriesOperation with the Remote Control Unit Horizontal Adjusting the Fan SpeedAdjusting the Airflow Direction Cancellation procedures High Power Operation¡ñNight Setback Mode Setting procedureSetting Procedures Using the 12-Hour on and OFF TimerTimer on mode Example Timer OFF mode ExampleCancellation procedure Using the 1-Hour OFF TimerSpecial Remarks Operation without the Remote Control Unit Care and CleaningCare and Cleaning Tips for Energy Saving TroubleshootingRefrigerant Flow Diagram Schematic DiagramSummery Appendix InstallationLocation Installation of the indoor unit Installation of the outdoor unit Air Purging with a Vacuum Pump for Test Run Knob of the manifold valve mustAir purging Packing List

KFR-3208GW specifications

Hisense Group, a key player in the global consumer electronics market, has made significant advancements in air conditioning technology with its model KFR-3208GW. Designed to meet the demands of both comfort and energy efficiency, this air conditioning unit stands out for its impressive blend of features and modern technologies.

One of the main features of the KFR-3208GW is its powerful cooling capability. With a cooling capacity of 3.2 kW, this unit can quickly lower indoor temperatures, making it ideal for residential and small commercial settings. The inverter technology integrated into the KFR-3208GW allows for precise temperature control while ensuring lower energy consumption, leading to substantial cost savings on electricity bills. This technology enables the compressor to adjust its speed according to the room temperature, thus maintaining a consistent climate without unnecessary energy spikes.

Another highlight of this air conditioning system is its Quiet Operation mode. The KFR-3208GW is designed to operate at low noise levels, making it suitable for bedrooms and other quiet environments. This is especially important for users who prefer a peaceful atmosphere for sleeping or working.

The air conditioning unit also features a multi-functional remote control, allowing users to effortlessly switch between the various modes such as cooling, heating, and dehumidification. The unit is equipped with a precise temperature sensor that ensures optimal performance and enhances user comfort.

Moreover, the KFR-3208GW is designed with advanced filtration systems that improve indoor air quality. The built-in filters are capable of capturing dust, allergens, and other airborne particles, contributing to a healthier living environment. This feature is particularly beneficial for individuals with respiratory issues or allergies.

In terms of installation, the KFR-3208GW offers flexibility, catering to different room layouts. Its compact design allows for easy wall mounting, making it an attractive option for space-constrained areas.

Overall, the Hisense Group KFR-3208GW air conditioning unit combines energy efficiency, cutting-edge technology, and user-friendly features, making it a desirable choice for those looking to enhance their indoor comfort while promoting a healthier atmosphere. As consumers continue to seek reliable and efficient cooling solutions, the KFR-3208GW is well positioned to meet these evolving needs.
Top Page Image Contents