Hisense Group KFR-3208GW instruction manual Installation of the outdoor unit

Page 24

Appendix: Installation

(3)Any part of the drainpipe should be below the outlet of the indoor unit

 

and the joints should be wrapped with waterproof adhesive tape to

Wire outlet

prevent leakage of condensed water.

Tubes

(4)Bind the tubes, wires and the drainpipe tightly with binding tape, with

 

the drainpipe under the wires.

 

(5)Press down the clamping plate of the tubes and fix the bound wires.

Drainpipe

 

Install the indoor unit

(1)Pull the bound wires out through the wall hole and put the indoor wires together with the indoor unit at the corresponding place of the wall plate. (2)Hook the indoor unit onto the retaining claws on the wall plate and move the unit body slightly to make sure that it is firm.

(3)Hold the two sides of the unit body and press it to the wall plate to ensure secure connection.

4. Installation of the outdoor unit

Mount the outdoor unit

A. Mount the outdoor unit in the selected place.

B. If the outdoor unit is to be mounted on the wall, the wall and the installation bracket should have sufficient intensity to bear the weight of the outdoor unit.

(1)Place the outdoor unit carefully onto the bracket.

(2)Fix the unit onto the bracket with four bottom bolts. The bolts should have anti-vibration pads to prevent falling down of the unit from vibration.

Connect the tubes of the outdoor unit

A. Electric wires

(1)Remove the wire cover of the outdoor unit with a screwdriver. (2)Remove the wire clip.

(3)Connect the wires to the corresponding terminals on the terminal panel.

Caution: All the " Y " -shaped terminals should be plugged into the line bank and the grounding loop terminal should be connected fully.

(4)Tighten all the screws to ensure good connection.

(5)Put the wires into place with a clip and replace the wire cover.

Caution: Never put extra wires into the wire compartment to avoid damage from eddying flow heating.

B. Tubes

The connection of the outdoor tubes is the same as steps (1) and (2) of the indoor unit.

22

Tube clamping plate

Tubes

Drainpipe

Wires

Wall plate

Tubes

Wires

Drainpipe

Tube clamping plate

Wire cover

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Instruction Manual Installation Compact Size Contents Alert SymbolsPage Composition of the Air Conditioner Hipower lamp Power lampTimer lamp ON/OFF buttonSymbols HR. Timer button High Power button Timer ON/OFF buttonTransmitter Sleep buttonHR Timer button Automatic switching between cooling and heatingFlap button FAN Speed selectorHOW to Install Batteries Operation GuideOperation with the Remote Control Unit Adjusting the Fan Speed Adjusting the Airflow DirectionHorizontal High Power Operation ¡ñNight Setback ModeSetting procedure Cancellation proceduresUsing the 12-Hour on and OFF Timer Timer on mode ExampleTimer OFF mode Example Setting ProceduresUsing the 1-Hour OFF Timer Cancellation procedureSpecial Remarks Care and Cleaning Operation without the Remote Control UnitCare and Cleaning Troubleshooting Tips for Energy SavingSchematic Diagram Refrigerant Flow DiagramAppendix Installation SummeryLocation Installation of the indoor unit Installation of the outdoor unit Knob of the manifold valve must Air purgingAir Purging with a Vacuum Pump for Test Run Packing List

KFR-3208GW specifications

Hisense Group, a key player in the global consumer electronics market, has made significant advancements in air conditioning technology with its model KFR-3208GW. Designed to meet the demands of both comfort and energy efficiency, this air conditioning unit stands out for its impressive blend of features and modern technologies.

One of the main features of the KFR-3208GW is its powerful cooling capability. With a cooling capacity of 3.2 kW, this unit can quickly lower indoor temperatures, making it ideal for residential and small commercial settings. The inverter technology integrated into the KFR-3208GW allows for precise temperature control while ensuring lower energy consumption, leading to substantial cost savings on electricity bills. This technology enables the compressor to adjust its speed according to the room temperature, thus maintaining a consistent climate without unnecessary energy spikes.

Another highlight of this air conditioning system is its Quiet Operation mode. The KFR-3208GW is designed to operate at low noise levels, making it suitable for bedrooms and other quiet environments. This is especially important for users who prefer a peaceful atmosphere for sleeping or working.

The air conditioning unit also features a multi-functional remote control, allowing users to effortlessly switch between the various modes such as cooling, heating, and dehumidification. The unit is equipped with a precise temperature sensor that ensures optimal performance and enhances user comfort.

Moreover, the KFR-3208GW is designed with advanced filtration systems that improve indoor air quality. The built-in filters are capable of capturing dust, allergens, and other airborne particles, contributing to a healthier living environment. This feature is particularly beneficial for individuals with respiratory issues or allergies.

In terms of installation, the KFR-3208GW offers flexibility, catering to different room layouts. Its compact design allows for easy wall mounting, making it an attractive option for space-constrained areas.

Overall, the Hisense Group KFR-3208GW air conditioning unit combines energy efficiency, cutting-edge technology, and user-friendly features, making it a desirable choice for those looking to enhance their indoor comfort while promoting a healthier atmosphere. As consumers continue to seek reliable and efficient cooling solutions, the KFR-3208GW is well positioned to meet these evolving needs.
Top Page Image Contents