GSW PART NO.70999 REV.G (03-12) operating instructions Installation, Location

Page 2

WARNING

This water heater must be installed strictly in accordance with the detailed instructions enclosed and local building codes. It must be installed with a proper pressure relief valve which may release water in operation. It is also possible that connections to the water heater, or the water heater itself, may develop leaks. It is therefore IMPERATIVE that the water heater be installed so that any water is directed to an adequate drain in such a way that it cannot damage the building, furniture, carpeting or other property subject to water damage. GSW CANNOT BE HELD RESPONSIBLE for damage caused by water from the water heater, pressure relief valve, or related fittings where adequate provision to drain such water has not been made. Closets without drains and carpeted areas are examples of unsuitable locations for any water heater.

These instructions have been written as a guide for the proper installation and operation of your water heater.

The manufacturer will not be liable for any damages caused by failure to comply with the installation and operation instructions outlined in the following pages.

INSTALLATION

This heater must be installed by a qualified, licensed gas fitter and according to CAN/CGA-B149 Installation Code or ANSI Z223.1 National Fuel Gas Code and/or local codes. If in doubt, consult your local utility.

LOCATION

Generally, the location selected should be as close to the wall as practical and as centralized with the piping system as possible. Heater should be located in an area not subject to freezing temperatures.

1”

1”

ALCOVE INSTALLATION

The water heater should be located so that the controls and drain are easily accessible. The heater should be located in an area where leakage of tank or connections will not result in damage to the area adjacent to the water heater or to the lower floors of the structure. When such locations cannot be provided, it is recommended that a suitable drain pan be installed under the heater. Such pans should be a maximum of 1 1/2 inches deep and have a minimum length and width of at least 2 inches greater than the diameter of the water heater and should be piped to an adequate drain.

Under no circumstances is the manufacturer to be held liable for any water damage in connection with this water heater.

CAUTION: When this water heater is installed directly on carpeting, carpeting must be protected by a metal or wood panel beneath the appliance extending beyond the full width and depth of the appliance by at least three inches in any direction, or if the appliance is installed in an alcove or closet, the entire floor must be covered by the panel. The panel must be strong enough to carry the weight of the heater when full of water. Failure to heed this warning may result in a fire hazard.

Minimum clearances between the heater and combustible/non combustible materials are 1 inch at the sides and rear; 20 inches from the top of water heater and 1 inch around the vent pipe. A minimum of 3 feet of clearance is required at the front (control) side of the heater for service.

For a closet installation, the door at burner side should be openable and a minimum of 4 inches clearance is needed. Water heater is certified for installation on a combustible floor. (See figure 1.)

1”

1”

CLOSET DOOR

4”

 

CLOSET INSTALLATION (TOP VIEW)

Figure 1

– 1 –

Page 1 Page 3
Image 2
Page 1 Page 3
Contents For Your Safety Direct Vent GAS Fired Water HeaterInstallation LocationOption Vent Location Limitations Condition Temperature & Pressure Relief Valve GAS ConnectionsInstallation Check List Pressure BUILD-UP in a Water SystemLighting Instructions for Heater with SIT GAS Controls VI Lighting After InstallationFor Your Safety Read Before Lighting Robertshaw R110 GAS Control Burner Maintenance Water Temperature RegulationHigher Setting Increases Risk of Scald Injury Exposure to WaterVenting System Inspection Maintenance Instructions General HousekeepingTank Cathodic ProtectionControl Do not Tamper with the GAS Control~ Certificate of Warranty ~

PART NO.70999 REV.G (03-12) specifications

The GSW PART NO. 70999 REV.G (03-12) is an exemplary product designed for high-performance application in various industrial settings. This part stands out not only for its robust construction but also for its advanced technological features, which cater to the evolving demands of modern industry.

One of the main characteristics of the GSW 70999 REV.G is its durable design, engineered to withstand challenging operational conditions. The materials used in its construction are specifically chosen for their strength and resistance to wear and corrosion, ensuring longevity and reliability in performance. This makes the component an ideal choice for applications that require consistent and dependable operation over extended periods.

In terms of technology, the GSW 70999 REV.G incorporates cutting-edge manufacturing processes that enhance its precision and functionality. The advanced machining techniques employed ensure tight tolerances and superior fit, which contribute to improved efficiency in machinery operation. This precision is particularly critical in high-speed applications, where even minor discrepancies can lead to significant performance issues.

Another key feature of the GSW 70999 REV.G is its adaptability. The part is designed with versatility in mind, allowing it to be integrated seamlessly into a variety of systems and equipment. This adaptability minimizes downtime during installation and maintenance, as users can easily incorporate the part into their existing configurations without extensive modifications.

The GSW 70999 REV.G also benefits from innovative design aspects such as ergonomic considerations, which aim to simplify handling and improve user experience. The thoughtful layout and accessibility of the component facilitate easier maintenance procedures, ultimately reducing operational costs and maximizing productivity for users.

Furthermore, GSW emphasizes sustainability in its product design and manufacturing processes. The materials are selected not only for their performance characteristics but also for their environmental impact, aligning with the industry's growing focus on sustainability and responsible sourcing.

In summary, the GSW PART NO. 70999 REV.G (03-12) is a crucial component characterized by its durability, precision, adaptability, and commitment to sustainability. It serves as an integral part in various industrial applications, promoting efficiency and reliability while catering to the increasing demands of modern technological advancement. Whether in high-speed settings or more moderate environments, this part exemplifies quality and innovation in industrial design.
Top Page Image Contents