GSW G65 instruction manual Lighting Instructions For Electronic Ignition GAS Models

Page 14

LIGHTING INSTRUCTIONS

FOR

ELECTRONIC IGNITION GAS MODELS

FOR YOUR SAFETY READ BEFORE LIGHTING

WARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY RESULT, CAUSING PROPERTY DAMAGE, PER- SONAL INJURY OR LOSS OF LIFE.

A.This appliance is equipped with an ignition device which automatically lights the pilot, DO NOT TRY TO LIGHT MANUALLY.

B.BEFORE LIGHTING, smell around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

What Do You Do If You Smell Gas?

-Do not try to light any appliance.

-Do not touch any electrical switch: do not use any phone in the building.

-Immediately call your gas supplier from a neighbour’s phone. Follow the gas supplier’s instructions.

-If you cannot reach your gas supplier, call the fire department.

C.Use only your hand to turn the gas control knob. Never use tools. If the knob will not turn by hand, don’t try to repair it, call a qualified service technician. Forcing or attempting to repair may result in fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system, and any gas control which has been under water.

Operating Instructions

1.Stop! Read the safety information above.

2.Turn off all electric power to appliance.

3.Remove thermostat access door.

4.Set thermostat to lowest setting.

5.This appliance is equipped with an ignition device which automatically lights the pilot. DO NOT TRY TO LIGHT

THE PILOT MANUALLY.

6. Turn gas control know clock-wise to “OFF”

7.Wait (5) five minutes to clear out any gas. If you then smell gas, STOP. Follow section “B” in the safety information at the head of this section. If you don’t smell gas, go to next steps.

8.Turn gas control knob counter-clock-wise to “ON”

9.Set thermostat to desired setting.

10.Replace insulation and thermostat access door.

11.Turn on all electric power to the appliance.

12.If the appliance will not operate, follow the instructions “TO TURN OFF GAS TO THE APPLIANCE”, and call your service technician or gas supplier.

GAS INLET

GAS CONTROL KNOB

(IN OFF POSITION

IGNITES

CONNECTION

PILOT TUBE

GAS OUTLET

CONNECTION

 

 

To Turn Off Gas To Appliance

1.Turn off all power to appliance.

2.Remove thermostat access door.

3.Set the thermostat to lowest setting.

4. Turn gas control knob clock-wise to “OFF”. Do not force.

5.Replace control access panel.

Page 13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Commercial GAS Water Heater What to do if YOU Smell GASFor the Installer and User of this GAS Fired Water Heater LocationRating at tank Water supply to meter Water supply to home Water Piping Pressure Build-up in a Water SystemPropane BTUInput SQ. VentingDIA Area Input Natural GAS Propane BTU/HROpen Position Flue DamperDamper Shaft Position Closed PositionValve and Ignition Module Connection Diagram Appliance in Standby ConditionSchematic Valve and Ignition Module On Appliance Call for Heat Stage Schematic Diagram Connection Diagram For Your Safety Read Before Lighting Mechanical Power Venting OptionInstallation Check List AIR SupplyLighting Instructions White Rodgers GAS Controls Hotter Water Increases the Risk ScaldLighting Instructions For Electronic Ignition GAS Models What Do You Do If You Smell Gas?Commercial GAS E.I. Troubleshooting Sequence For Honeywell ValveLP. GAS is Heavier than AIR Maintenance InstructionsLP Propane GAS Models Correct ANY Defects ImmediatelyTemperature Temperature Pressure Relief ValveWater Temperature Regulation General HousekeepingDishwashing Machine Requirements Water Odor ProblemsCathodic Protection Multiple Heaters in Single SystemTWO Temperature Single Temperature or BoosterPRE-HEATER With Horizontal Storage Tank With Vertical Storage TankTemperature Pressure Relief Valve Installation Record ScheduleWarranty Three Year Warranty Model no Serial no

G65 specifications

The GSW G65 is a notable entry in the world of heavy-duty machinery, specifically designed for tasks that demand reliability and performance under challenging conditions. At the forefront of its features is a powerful engine that ensures optimal performance with robust torque delivery. This machine is equipped with a high-efficiency, state-of-the-art powertrain that maximizes productivity while minimizing fuel consumption.

One of the standout characteristics of the GSW G65 is its exceptional lifting capacity, making it suitable for a variety of applications including construction, mining, and agricultural sectors. The G65 can lift and transport heavy loads with ease, enhancing operational efficiency. Safety is paramount, and the G65 incorporates advanced stability control systems, ensuring operators can work confidently even in difficult environments.

The GSW G65 also boasts cutting-edge technologies that elevate its performance standards. A sophisticated hydraulic system allows for smooth operation, enabling precise movements necessary for intricate tasks. This hydraulic innovation provides the machine with rapid response times and reduced downtime, vital components for any project requiring efficiency.

Furthermore, the G65 is designed with operator comfort in mind. The cabin includes ergonomic seating and intuitive controls, ensuring that operators can remain productive throughout their shifts without the burden of discomfort. Additionally, with advanced noise reduction features, the cabin environment is conducive to focus and safety.

Durability is a key attribute of the GSW G65. Built with high-strength materials, the machine is designed to withstand the rigors of demanding work environments. Its maintenance-friendly design allows for easy access to components, simplifying routine checks and servicing.

In terms of technology, the G65 comes equipped with a smart monitoring system that provides real-time feedback on performance metrics, helping operators stay informed of the machine's condition. This feature enhances preventative maintenance practices, reducing the likelihood of unexpected breakdowns.

Overall, the GSW G65 stands out as a formidable machine that blends power, efficiency, and advanced technology. Its robust features and focus on operator safety and comfort make it an indispensable tool in industries that require heavy lifting and reliability. The G65 is not just a machine; it represents a commitment to excellence and innovation in heavy-duty applications.
Top Page Image Contents