American Power Conversion Central Air Conditioning System manual

Page 75

Troubleshooting: Semi-Annual Preventive Maintenance

Problem

Possible Cause

Corrective Action

 

 

 

Humidifier

• Water supply is not on.

• Turn on the supply.

inoperative

• Electrical connections are

• Tighten all electrical connections.

 

loose.

 

 

• Humidifier fuse is open.

• Check for short circuits, and replace blown fuses.

 

• Relative humidity is above

• No action needed.

 

the setpoint.

 

 

 

 

Reheat elements

• Overheat switch is actuated.

• Reset and check for operation.

inoperative

• A fuse is open.

• Check for short circuit.

 

• The thermostat is set too low.

• Adjust thermostat to required temperature.

 

• The thermal fuse in the

• Replace thermal fuse.

 

heater is open.

 

 

 

 

Water carry-over

• Insufficient air quantity over

• Check for correct airflow and clean filters.

 

the cooling coil.

 

 

• Dirty coil.

• Clean the coil.

 

• Excessive airflow.

• Reduce airflow to specifications.

 

• Blocked drain pan or trap.

• Clean the drain pan and trap.

 

 

 

Module is receiving

• Remote shutdown enabled.

• Disable remote shutdown.

power, but will not

 

 

operate

 

 

 

 

 

NetworkAIR IR Operation, Maintenance, and Troubleshooting

69

Page 74 Page 76
Image 75
Page 74 Page 76
Contents NetworkAIR IR Precision Air Conditioner Page Contents Set Up Alarms Network Management Card Maintenance Display Interface OperationScrolling status screens Using the DisplayNavigating the interface Main menu screenPassword entry Change settingsStart the System Stop the System System Options Set Up System ConfigurationOperation Set Up System Configuration System Delays Building management Sensor setupOptions for Fluid-Cooled Modules Fluid-Coil Type Applicable SettingsActuator Types Valve TypesCoil Fluid Temp Activation Threshold and Deadband Input contacts Set Up Contacts and RelaysMap Description/Function Output relaysOperation Set Up Contacts and Relays Set Up Module Configuration Configure ModuleAlarm detectors Set Up Module Control Calibrate airflow manuallyCalibrate airflow automatically Reset variable frequency drive Reset humidifierSet up Humidifier Reset compressors How the modes work Control the EnvironmentSetpoints Deadbands ModesEssential Functions PID controls Loop Behavior PID Tuning Correction How to tune the PIDsHumidification sensitivity Set Up Alarms Temperature alarmsHumidity alarms Alarm delay Maint intervalsCoil fluid thresholds Group config Set Up GroupSys failure events Group settingsOperation Set Up Group Date and time Set Up the DisplayPassword & Time-out Temperature & pressure unitsHow to update the firmware Adjust displayProduct data Reset to defaultsNetwork config Set Up Network ConfigurationModule status View Status ReadingsSystem status Group status View Event LogView Log Control beeper Respond to AlarmsMajor or minor alarm LEDs View active alarmsReset sys failure Clear active alarmsDisplayed Alarm Message Action Required Alarm messages and suggested actionsDisplayed Alarm Message Action Required Check that the # Systems setting Path Main Setup Group Group Module Module in which the alarm occurred Module Control Displayed Alarm Message Action Required Displayed Alarm Message Action Required Page Overview Quick ConfigurationTCP/IP configuration methods APC Device IP Configuration WizardBootp & Dhcp configuration Network Management Card Quick Configuration Option 43 = 01 04 31 41 50 Local access to the control console Control console Remote access to the control consoleNetwork Management Card Quick Configuration How to Access a Configured Unit Web interfaceTelnet/SSH Snmp FTP/SCP How to Recover From a Lost Password How to Upgrade Firmware Upgrade the AOS. For example Page Environment Monthly Preventive MaintenanceCleanliness MechanicalElectrical Record the amperages for the following components Quarterly Preventive MaintenanceFunctional tests Semi-Annual Preventive Maintenance Page Troubleshooting Troubleshooting Semi-Annual Preventive Maintenance Problem Possible Cause Corrective Action Page Limited Product Warranty for APC Products Terms of warrantyAPC product covered Assignment of warranties Drawings, descriptionsExclusions Limited Product Warranty for APC Products Warranty Procedures ClaimsLabor Parts Page Page APC Worldwide Customer Support

Central Air Conditioning System specifications

American Power Conversion (APC) is renowned for delivering innovative solutions in the realm of power management, but its contributions don't stop there. The company has also made significant advancements in central air conditioning systems. Featuring cutting-edge technologies and energy-efficient designs, their HVAC systems are tailored to meet modern needs while ensuring comfort and sustainability.

One of the standout features of APC central air conditioning systems is their variable speed compressor technology. This advanced system operates at different speeds rather than just cycling on and off. By adjusting the compressor speed to match the cooling demand, these systems optimize energy consumption, leading to lower electricity bills and extended equipment lifespan.

APC's systems also incorporate smart thermostat capabilities, allowing homeowners to monitor and control their air conditioning remotely. Through a mobile app, users can adjust temperature settings, create schedules, and receive maintenance alerts, all of which enhance convenience and efficiency. Furthermore, these smart thermostats can learn user habits over time, automatically adjusting temperature settings to maximize comfort and savings.

Another key characteristic of APC central air conditioning systems is their commitment to eco-friendly refrigerants. Utilizing low global warming potential (GWP) refrigerants, these systems minimize the environmental impact while maintaining high-performance standards. With energy efficiency ratings that often exceed industry benchmarks, APC systems contribute to reduced greenhouse gas emissions and help homeowners adopt sustainable practices.

The design of APC air conditioning units is also noteworthy. They are constructed with durable materials that withstand various weather conditions, ensuring reliability during the hottest months. Additionally, the streamlined design of these systems enhances aesthetic appeal, making them a suitable choice for modern homes.

In conclusion, the American Power Conversion central air conditioning system exemplifies the synergy of innovative technology, energy efficiency, and user-friendly features. With variable speed compressors, smart controls, eco-friendly refrigerants, and robust construction, APC provides homeowners with a dependable and sustainable climate control solution. As demand for energy-efficient products continues to grow, APC is poised to lead the way in intelligent air conditioning solutions that prioritize both comfort and environmental responsibility.
Top Page Image Contents