Turbo Charge Cradle
(Compatible only with Braava 380)
•Plug the adapter into a standard electrical outlet and plug the other end of the cord into the power jack on the Cradle.
•One blue light will appear on the front of the Cradle.
•Place Braava on the Cradle to charge.
•Charge Braava for approximately 2 hours or until a solid blue light appears on Braava’s power button.
•Remove Braava from the Cradle before applying cleaning cloths or the
•Charging time and run time can be affected by operating temperature, floor type and other conditions.
1 Power Jack |
| 2 Charging Contacts | 3 LED indicator | |
|
| TIP: Braava’s adapter is compatible with the Cradle | ||
1 |
| and can be plugged into either Braava directly | ||
| or into the Turbo Charge Cradle. | |||
|
| CAUTION: Do not charge Braava while the | ||
|
| |||
2 |
| attached. Charge using a standard outlet only. | ||
2 | Only use the adapter included with the Braava | |||
| ||||
| 380t. See Braava manual for safety warnings | |||
|
| |||
3 |
| and instructions. |
|
Compatible only with the Braava 380t.
Charging Indicators | The NorthStar | ||
(While Plugged In) | Navigation Cube | ||
|
|
| The Cube uses 2 C |
|
|
| batteries. The battery |
|
|
| door can be found on the |
|
|
| |
|
|
| bottom of the Cube. |
1 Power Button
Red pulsing light: Battery charging
Blue solid light: Battery charged
Please dispose of all batteries properly by finding a recycling resource near you.
global.irobot.com 11