iRobot 320 Using Braava with one Cube, Using Braava with multiple Cubes For Braava 380t only

Setting Up NorthStar Navigation Cubes

Using Braava with one Cube

•Place the Cube near the center of the area you want to clean and start Braava nearby.

•Braava will clean the area around the Cube, and may extend into other rooms based on the cleaning mode and how far the NorthStar signal reaches.

•If you have a choice of rooms, place the Cube in a larger room to maximize NorthStar coverage.

•Once Braava has completed its run, you can move the Cube to clean a different part of your home.

Using Braava with multiple Cubes (For Braava 380t ONLY):

•Use one or more extra Cubes (sold separately) to expand how far Braava cleans in a single run.*

•Place extra Cubes in rooms or areas next to the area covered by the first Cube. The Cubes should typically be between 20 and 25 feet from each other for the NorthStar coverage to overlap.

•Braava will automatically clean from one Cube to another.

*Cubes are pre-programmed to different NorthStar channels, indicated on the bottom of the Cube. Cubes with different channels must be used for multi-Cube cleaning.

25’

One Cube Multiple Cubes

global.irobot.com 17