Trouble Shooting
Visit global.irobot.com for additional tips and trouble shooting.
Navigation System Indicators (NSI)
Error Indicators on the Navigation System Indicator (NSI) while cleaning
Problem: | Likely Cause | What To Do |
|
|
|
Solid red light on | System error | • Press and hold the power button to turn Braava off. |
the middle NSI. |
| • Vigorously rotate both wheels for 15 seconds. |
|
| • Place Braava on floor and power it on. Make sure a dry |
|
| cleaning cloth has been applied. |
|
| • If red light is gone, press Sweep. |
|
| • If red light persists, contact Customer Support. |
|
|
|
Red light blinks 2 to | Braava is stuck in | Remove Braava from the situation and restart in a new area. |
6 times on the middle | its environment and |
|
NSI. | cannot free itself. |
|
|
|
|
Red light blinks 14 | Braava has | Turn Braava off and let it cool down before resuming |
times on the middle | detected the motor | cleaning. |
NSI. | is getting too hot. |
|
|
|
|
Red light blinks 15 | Braava is stuck | Remove Braava from the situation and restart in a new area. |
times on the middle | in too small of an |
|
NSI. | area and cannot |
|
| free itself. |
|
Red light on the | A sensor is | Remove and reapply cleaning cloth. When reapplying, follow |
middle NSI when | activated so | these instructions: |
pressing Sweep or | Braava won’t start | • Ensure cloth does not overlap into the middle channel of |
Mop, accompanied | driving. | the removable cleaning pad |
by 3 beeps. |
| • Ensure cloth is not bunching up, which can prevent the |
|
| removable pad from reattaching completely to the robot. |
Error Indicators on the Navigation System Indicator (NSI) while charging | ||
|
|
|
Problem: | Likely Cause | What To Do |
|
|
|
Solid red light on | System error | This is not a charging error, but will prevent Braava from |
the middle NSI. |
| charging while Braava is plugged in. See ‘Error Indicators |
|
| While Cleaning’ chart for instructions. |
|
|
|
Red light blinks 7 or | Charging error | Contact Customer Support. |
8 times on the middle |
|
|
NSI. |
|
|
All lights flashing | Incompatible | Remove the incompatible adapter and use only the adapter |
on NSI and buttons | adapter used | included with Braava. |
and robot beeping |
|
|
while charging. |
|
|
24Braava 300 Series Owner’s Manual