ResMed III ST-A user manual Troubleshooting, No display

Page 43

Troubleshooting

If there is a problem, try the following suggestions. If the problem cannot be solved, contact your equipment supplier or ResMed. Do not attempt to open the

VPAP III ST-A.

Problem

Possible Cause

Solution

 

 

 

No display.

Power not connected or

Ensure the power cable is

 

switch at back is not on.

connected and that the

 

 

switch at the back of the

 

 

device is in the ON position.

Insufficient air

Ramp Time is in use.

delivered from the

 

VPAP III ST-A.

 

Wait for air pressure to build up.

 

Air filter is dirty.

Replace air filter.

 

Air tubing is kinked or

Straighten or replace

 

punctured.

tubing.

 

Air tubing not connected

Check air tubing.

 

properly.

 

 

Mask and headgear not

Adjust position of mask and

 

positioned correctly.

headgear.

 

Plug(s) missing from access

Replace plug(s).

 

port(s) on mask.

 

 

Pressure required for

See your clinician to adjust

 

treatment may have

the pressure.

 

changed.

 

 

 

 

The VPAP III ST-A does

Power cord not connected

Connect power cord firmly

not start when you

properly.

at both ends.

breathe into the mask

 

 

(when SmartStart is

Power outlet may be faulty.

Try another power outlet.

enabled).

 

 

 

The VPAP III ST-A is not

Switch power switch at rear

 

switched on.

of the VPAP III ST-A to on (I).

 

SmartStart not on.

Enable SmartStart.

 

Mask Alarm has been

Disable Mask Alarm to

 

enabled; SmartStart has

enable SmartStart if

 

automatically been

appropriate.

 

disabled.

 

Breath is not deep enough to trigger SmartStart.

Take a deep breath in and out through the mask.

Troubleshooting 35

Image 43
Contents Vpap III ST-A ROW ENG System Components Illustrations52 cm 3 m 248139/3 05 Manufactured by Contents System Specifications Limited Warranty Index What the Vpap III ST-A is Intended for IntroductionMedical Information User/Owner ResponsibilityPage Adverse Effects Page Masks Vpap III ST-A SystemHumidifiers AccessoriesSetting up the Vpap III ST-A Setting up the Vpap III ST-A SystemAttaching a HumidAire Humidifier Attaching a HumidifierAttaching a HumidAire 2i Humidifier Attaching a HumidAire 2iC HumidifierAttaching a Passover Humidifier LCD Screen Using the LCD Screen and KeypadLEDs Vpap III ST-A keypad has the following keys Keypad KeysPage Ramp Time Starting TreatmentUsing the Mask-Fitting Feature Using the HumidAire 2i Warm-up FeatureStopping Treatment High Leak Page Periodic Cleaning Cleaning and MaintenanceDaily Cleaning Weekly CleaningReplacing the Air Filter Testing the AlarmServicing How to Use the Standard Menu How to Use the Vpap III ST-A MenusRamp Screen Settings Summary Screens How to Use the Detailed Menu if enabled by your clinicianMIRAGE, MIR Full STANDARD, Ultra Menu Functions Detailed Menu only Settings MenuSmartStart Options Menu Results MenuServicing Menu Treatment ScreensOxygen saturation This screen only Level SpO2 98% Non-vented Mask Alarm Screen Page Testing the Alarm AlarmsAlarms Troubleshooting Alarm Mute KeyLCD Ipap Lower LCD System Error LCD LOW MV Alarm Nasal Irritation Using a Battery to Power the Vpap III ST-AHelpful Hints Starting outResMed DC-24/30 Converter No display TroubleshootingSystem Error Dynamic pressure characteristics System SpecificationsIEC 60601-1 Classifications Pressure Variation Pressure Volume CurveEnvironmental information Symbols which may Appear on the ProductEmissions test Compliance Next Portable and mobile RF communications Separation distance according to frequency of transmitter Limited Warranty Page Index Index

III ST-A specifications

The ResMed III ST-A is a state-of-the-art ventilator specifically designed for patients with respiratory challenges, particularly those suffering from obstructive sleep apnea, neuromuscular conditions, or chronic obstructive pulmonary disease (COPD). It stands out due to its user-friendly features, advanced technologies, and robust performance, making it a preferred choice for both clinicians and patients.

One of the main features of the ResMed III ST-A is its intelligent algorithm designed to optimize minute ventilation. This provides variable support that adapts to the patient's breathing patterns, enhancing comfort and ensuring effective ventilation. By offering a range of modes, including spontaneous timed (ST) and volume-assured pressure support (VAPS), this device caters to various clinical needs, facilitating customized therapy based on individual patient requirements.

The built-in leak compensation feature of the ResMed III ST-A allows it to maintain accurate pressure delivery even in the presence of large leaks, which is crucial for ensuring effective therapy. This is particularly beneficial for patients who may have difficulty achieving a proper seal with their masks.

Incorporating advanced technologies, the ResMed III ST-A features AutoSet technology, which automatically adjusts pressure levels in response to detected changes in airflow. This promotes optimal treatment at all times, reducing the burden on patients and allowing for a more seamless sleep experience. The device also supports a range of connectivity options, enabling healthcare providers to monitor patient compliance and therapy effectiveness remotely through ResMed's cloud-based platform.

The ResMed III ST-A is designed with a user-friendly interface, including a bright, easy-to-read display and simplified controls, promoting ease of operation for both healthcare professionals and patients. Its compact size and lightweight design enhance portability, making it suitable for home and travel use.

Furthermore, the device's comprehensive data logging capabilities allow clinicians to access a wealth of information regarding patient adherence and sleep patterns, thus supporting informed decision-making. The ResMed III ST-A also prioritizes patient safety, featuring alarms and alerts for high- and low-pressure conditions.

In conclusion, the ResMed III ST-A embodies cutting-edge technology and thoughtful design, providing versatile and effective respiratory support. With its combination of intelligent algorithms, user-friendly features, and robust patient monitoring capabilities, it is well-positioned to enhance the quality of life for individuals with respiratory challenges.