ResMed III ST-A Introduction, Medical Information, User/Owner Responsibility, Contraindications

Page 9

Introduction

The VPAP™ III ST-A is a bilevel pressure support ventilator specifically designed for non-invasive mask ventilation.

This user manual contains the information you need for the correct use of your

VPAP III ST-A.

User/Owner Responsibility

The user or owner of this system shall have sole responsibility and liability for any injury to persons or damage to property resulting from:

operation which is not in accordance with the operating instructions supplied

maintenance or modifications carried out unless in accordance with authorized instructions and by authorized persons.

Please read this manual carefully before use.

This manual contains special terms and icons that appear in the margins to draw your attention to specific and important information.

Warning alerts you to possible injury.

Caution explains special measures for the safe and effective use of the device.

Note is an informative or helpful note.

Medical Information

What the VPAP III ST-A is Intended for

The VPAP III ST-A system is intended to provide non-invasive ventilation for patients with respiratory insufficiency or obstructive sleep apnea (OSA), in the hospital or home.

Contraindications

The VPAP III ST-A should not be used if you have an insufficient respiratory drive to endure brief interruptions in non-invasive ventilation therapy. The

VPAP III ST-A is not a life support ventilator and may stop operating with power failure or in the unlikely event of certain fault conditions.

If you have any of the following conditions, tell your doctor before using the

VPAP III ST-A:

acute sinusitis or otitis media

epistaxis causing a risk of pulmonary aspiration

conditions predisposing to a risk of aspiration of gastric contents

impaired ability to clear secretions

Introduction 1

Image 9
Contents Vpap III ST-A ROW ENG System Components Illustrations52 cm 3 m 248139/3 05 Manufactured by Contents System Specifications Limited Warranty Index Medical Information IntroductionUser/Owner Responsibility What the Vpap III ST-A is Intended forPage Adverse Effects Page Masks Vpap III ST-A SystemHumidifiers AccessoriesSetting up the Vpap III ST-A Setting up the Vpap III ST-A SystemAttaching a HumidAire 2i Humidifier Attaching a HumidifierAttaching a HumidAire 2iC Humidifier Attaching a HumidAire HumidifierAttaching a Passover Humidifier Using the LCD Screen and Keypad LCD ScreenLEDs Vpap III ST-A keypad has the following keys Keypad KeysPage Ramp Time Starting TreatmentUsing the HumidAire 2i Warm-up Feature Using the Mask-Fitting FeatureStopping Treatment High Leak Page Daily Cleaning Cleaning and MaintenanceWeekly Cleaning Periodic CleaningTesting the Alarm Replacing the Air FilterServicing How to Use the Vpap III ST-A Menus How to Use the Standard MenuRamp Screen Settings Summary Screens How to Use the Detailed Menu if enabled by your clinicianMIRAGE, MIR Full STANDARD, Ultra Menu Functions Detailed Menu only Settings MenuSmartStart Options Menu Results MenuServicing Menu Treatment ScreensOxygen saturation This screen only Level SpO2 98% Non-vented Mask Alarm Screen Page Alarms Troubleshooting AlarmsAlarm Mute Key Testing the AlarmLCD Ipap Lower LCD System Error LCD LOW MV Alarm Helpful Hints Using a Battery to Power the Vpap III ST-AStarting out Nasal IrritationResMed DC-24/30 Converter No display TroubleshootingSystem Error Dynamic pressure characteristics System SpecificationsIEC 60601-1 Classifications Pressure Variation Pressure Volume CurveEnvironmental information Symbols which may Appear on the ProductEmissions test Compliance Next Portable and mobile RF communications Separation distance according to frequency of transmitter Limited Warranty Page Index Index

III ST-A specifications

The ResMed III ST-A is a state-of-the-art ventilator specifically designed for patients with respiratory challenges, particularly those suffering from obstructive sleep apnea, neuromuscular conditions, or chronic obstructive pulmonary disease (COPD). It stands out due to its user-friendly features, advanced technologies, and robust performance, making it a preferred choice for both clinicians and patients.

One of the main features of the ResMed III ST-A is its intelligent algorithm designed to optimize minute ventilation. This provides variable support that adapts to the patient's breathing patterns, enhancing comfort and ensuring effective ventilation. By offering a range of modes, including spontaneous timed (ST) and volume-assured pressure support (VAPS), this device caters to various clinical needs, facilitating customized therapy based on individual patient requirements.

The built-in leak compensation feature of the ResMed III ST-A allows it to maintain accurate pressure delivery even in the presence of large leaks, which is crucial for ensuring effective therapy. This is particularly beneficial for patients who may have difficulty achieving a proper seal with their masks.

Incorporating advanced technologies, the ResMed III ST-A features AutoSet technology, which automatically adjusts pressure levels in response to detected changes in airflow. This promotes optimal treatment at all times, reducing the burden on patients and allowing for a more seamless sleep experience. The device also supports a range of connectivity options, enabling healthcare providers to monitor patient compliance and therapy effectiveness remotely through ResMed's cloud-based platform.

The ResMed III ST-A is designed with a user-friendly interface, including a bright, easy-to-read display and simplified controls, promoting ease of operation for both healthcare professionals and patients. Its compact size and lightweight design enhance portability, making it suitable for home and travel use.

Furthermore, the device's comprehensive data logging capabilities allow clinicians to access a wealth of information regarding patient adherence and sleep patterns, thus supporting informed decision-making. The ResMed III ST-A also prioritizes patient safety, featuring alarms and alerts for high- and low-pressure conditions.

In conclusion, the ResMed III ST-A embodies cutting-edge technology and thoughtful design, providing versatile and effective respiratory support. With its combination of intelligent algorithms, user-friendly features, and robust patient monitoring capabilities, it is well-positioned to enhance the quality of life for individuals with respiratory challenges.