Riccar RSL2C, RSL1 owner manual HOW to Remove / Install the Bottom Plate

Page 10

HOW TO REMOVE / INSTALL THE BOTTOM PLATE

11

CAUTION: First, disconnect the vacuum

cleaner from the electrical outlet.

To remove bottom plate:

1. After unplugging the power cord, turn the vacuum cleaner over, exposing the underside.

2. Press the two holding tabs inward (diagram 11) releasing the bottom plate. Remove the bottom plate.

12

To install bottom plate:

1. Install bottom plate, making sure bottom plate hinges are in place before setting the plate (diagram 12).

2. Press plate into position until the plate “clicks” on both sides.

8

Image 10
Contents RSL2 RSL2C KEY Replacement Parts Table of Contents How ToImportant Safety Instructions Polarization Instructions Household Models Grounding Instructions Commercial ModelsVacuum Assembly Procedure Assembling the VacuumAssembling the Vacuum Edge Cleaner On / OFF SwitchAutomatic Carpet Height Adjustment HOW to Change the Vacuum BAG HOW to Remove / Install the Bottom Plate HOW to Change the Belt HOW to Replace the Headlight Bulb HOW to Reset the Circuit Breaker For Best Performance Riccar Vacuum Cleaner Limited Warranty Riccar’s Limited WarrantyItem IBRSL1B B503-1200C