HOW to Reset the Circuit Breaker

Your vacuum features a circuit breaker

to protect the machine against damage due to a surge in the electrical current. Electrical surging can be a result of, though not limited to, a jammed brush roll (i.e. vacuuming up a sock or throw rug) or a jammed motor fan.

Should your vacuum cleaner experi- ence a jammed brush roll with the cir- cuit breaker tripping, first press the on/off button to the off position and unplug the unit. Inspect the brush roll by removing the bottom plate (see “How to Remove Bottom Plate”) and remove any debris which may be causing the jam. Reinstall the bottom plate (see “How to Install Bottom Plate”), reset the circuit breaker (dia- gram 20), plug in power cord, and turn unit on. If the unit fails to turn on, return it to an authorized service center for service.

Circuit Breaker

Reset Button