Riccar RSL2C, RSL1 owner manual HOW to Change the Vacuum BAG

Page 9

HOW TO CHANGE THE VACUUM BAG

1.Unzip outer cloth bag (diagram 7).

2.Remove used bag by pressing the bag holder tab and pulling bag off vacuum (diagram 8). Discard used bag.

3.To install new bag, position the bottom of the bag collar into the bag collar holder (diagram 9).

4.Push the top of the bag collar inward until the collar “snaps” into place (diagram 10).

4. Zip the outer cloth bag closed.

7

8

9

10

7

Image 9
Contents RSL2 RSL2C KEY Replacement Parts How To Table of ContentsImportant Safety Instructions Grounding Instructions Commercial Models Polarization Instructions Household ModelsAssembling the Vacuum Vacuum Assembly ProcedureAssembling the Vacuum On / OFF Switch Edge CleanerAutomatic Carpet Height Adjustment HOW to Change the Vacuum BAG HOW to Remove / Install the Bottom Plate HOW to Change the Belt HOW to Replace the Headlight Bulb HOW to Reset the Circuit Breaker For Best Performance Riccar’s Limited Warranty Riccar Vacuum Cleaner Limited WarrantyItem IBRSL1B B503-1200C