
HOW TO REPLACE THE HEADLIGHT BULB
16 |
| WARNING: To reduce the risk of electric | |
| Nozzle | shock and injury from moving parts, unplug | |
| screws | vacuum before cleaning or servicing. | |
|
| ||
|
| 1. First remove the nozzle housing. | |
|
| Turn the unit over to expose the | |
|
| underside. Locate the two main | |
|
| nozzle screws (diagram 16) and | |
|
| remove both. Turn the unit right | |
17 |
| side up. Locate the two nozzle | |
|
| tabs on the back of the unit (dia- | |
|
| gram 17) and unlatch the nozzle | |
|
| housing. (Note: It is easier to | |
|
| remove the nozzle when the vacu- | |
|
| um is lying flat on its back - see | |
Nozzle | diagram 19). Lift the nozzle hous- | ||
ing off the unit to expose the light | |||
Tabs | |||
bulb. | |||
|
| ||
18 |
| 2. Remove bulb by pulling it | |
|
| straight out of the light socket | |
|
| (diagram 18). | |
|
| 3. To install new bulb, simply re- | |
|
| insert the bulb into the light | |
|
| socket. | |
|
| 4. Place nozzle housing back onto | |
|
| unit with the front side of the | |
19 |
| nozzle set into place first (diagram | |
| 19) then set the nozzle downward | ||
|
| ||
|
| until nozzle “clicks” into place on | |
|
| both sides. Turn unit over and rein- | |
|
| sert main nozzle screws. |
10