Optional Cleaning Tools

All Riccar upright vacuum cleaners offer an attachment port that enables you to insert optional cleaning tools (available through your Riccar dealer). Should you have carpeted stairs, for example, it is highly recommended to use one of the two kits pictured, since each offers either a 12- or 15- foot hose for safe stair cleaning. These kits are effective overall cleaning tools to address some of the hard to reach areas of your home or car. Talk to your Riccar dealer to see which tools might be beneficial to your home environment.

For Models Without On-Board Tools

Deluxe Attachment Set DLATT12G (Fig. 32)

1.12-foot hose

2.Curved wand

3.Extension wand (2 pieces)

4.Dusting brush

5.Crevice tool

6.Upholstery tool

7.Upholstery brush insert

8.Deluxe floor brush

For Models With On-Board Tools

Attachment Set DLATT15 (Fig. 33)

1.15-foot hose

2.Curved wand

3.Deluxe floor brush

1.How to connect the hose assembly to the vacuum cleaner: Pull out and open the suction control dial by turning the lid located on the back of the vacuum cleaner. Insert the soft, rubber end of the hose assem- bly into the cleaning attachment opening. Push in while twisting the hose end to ensure the hose is fastened securely (Fig. 34).

2.How to connect the tool: You can connect any of the cleaning tools to the end of the extension wand(s) or curved wand and twist for a secure fit. To remove the cleaning tool from the extension wand(s) or curved wand, simply twist and pull apart.

WARNING: If optional tools are used do not keep unit running in one spot for a long period to prevent carpet damage.

Fig. 32

Fig. 33

Fig. 34