FULL BAG INDICATOR LIGHT
MODELS 300 and 300C
The warning light is located on top of the dust compartment (see Fig. 26). The light will trigger if the filter bag is full or if there is a clog in the vacuum cleaner. If the light indica- tor turns on, check the filter bag. If it is not full, check the vacuum cleaner for clogs by inspecting the agitator area (see “How to Remove the Bottom Plate”), hose, and/or attachment inlet.
Please disregard the indicator light during attachment cleaning. The light is designed to indicate air flow restric- tion during carpet cleaning. When using cleaning attach- ments, the indicator will light periodically due to normal attachment air flow restrictions.
Fig. 26
TOOLS
Fig. 27
Fig. 30
Fig. 28
Fig. 29
Fig. 31
FAST TASK™ CLEANING TOOLS
(Models 100, 300, and 300C)
Select models are equipped with Fast Task™ cleaning tools which include a combination upholstery/dusting tool, crevice tool, and stretch hose.
1.Remove the telescopic wand from the body of the vacuum [Fig. 27]. Unlock wand collar (located on end of wand) [Fig. 28], extend wand, and
NOTE: Wand collar locking rotation is marked with arrows on wand. Wand collar lock and unlock functions require only 1/2 turn of collar.
2.Remove the crevice tool on left side of vacuum cleaner and insert into end of wand [Fig. 29]. The vacuum is now ready for crevice cleaning.
3.Insert the combination upholstery/dusting tool (located conveniently in the back of the dust compartment) onto the end of the crevice tool [Fig. 30]. The combination tool can also be inserted directly onto the telescopic wand. To convert the dusting brush to an upholstery tool, simply slide the brush off [Fig. 31].
9