Riccar 4000 manual Handle Adjustments, Replacing Filter BAG

Page 7

ASSEMBLY AND OPERATION

Fig. 7

Fig. 8

Fig. 9

Fig. 10

Fig. 11

HANDLE ADJUSTMENTS

The handle can be set to one of three positions: Upright, Middle or Low. To release the handle, step on the pedal at the left rear cor- ner of the vacuum cleaner [Fig. 7].

1.UprightPosition: Handle locks in this position for vacuum cleaner storage [Fig. 7]. The handle should always be in the upright position when cleaning tools are used.

2.Middle Position: This position is for normal cleaning [Fig. 8]. While in the middle position, the front of the nozzle can be raised for crossing room thresholds by lowering the handle.

3.Low Position: This position is used for cleaning under furniture [Fig. 9].

REPLACING FILTER BAG

Genuine Riccar® EcoPure® Vacuum Cleaner filter bags should be used for best performance and air filtration. Always operate the vacuum cleaner with a filter bag installed.

NOTE: If secondary or post filters need to be replaced, see page 6 before replacing filter bag.

1.Remove the used filter bag by pulling bag collar off the bag holder [Fig. 10]. Do not re-use filled filter bags.

2.Attach the new filter bag onto the bag holder.

3.Re-insert the tab on bottom edge of dust cover into the groove on the dust compartment housing [Fig. 11]. Press it into place and close the dust cover tightly.

5

Image 7
Contents Vacuum Cleaner Customer Record IndexFor Best Performance Read ALL Instructions Before Using this Appliance Important Safety InstructionsModels 100, 200, 300, and 300C Grounding InstructionsFAIL-SAFE Thermal Fuse Protection Model 300C onlyParts Identification Replacement PartsON/OFF Switch Assembly and OperationAttaching the Handle Replacing Filter BAG Handle AdjustmentsReplacing Post Filter Replacing Secondary FilterReplacing Headlight Bulb Removing and Reinstalling Bottom PlateUnclogging Nozzle and Hose Replacing Agitator BeltModels 300 and 300C Full BAG Indicator LightFast Task Cleaning Tools ToolsFor Models Without On-Board Tools Optional Cleaning ToolsFor Models With On-Board Tools Page Standard Preferred Series Features