Integra DTR-5.1 System with L/R front and center speakers, System with L/R front speakers, Stereo

Page 21
Using Listening Mode
Before Using Listening Mode
Listening Modes
The DTR-5.1’s surround sound enables you to enjoy the presence of a movie theater or concert hall in your room.
Before using a listening mode, make sure the Speaker Setup parameters have been set (refer to page 14). Once the parameters have been set, it is not necessary to set them again.
The configuration of the speakers are very important for the surround sound. Refer to “connecting speakers” on page 10.
DOLBY DIGITAL Surround,
DTS (Digital Theater System) Surround
This 5.1-channel digital surround format enables you to individually record and play five full-range(20Hz–20kHz) channels (left and right front, center, two surround channels) plus an LFE channel (Low Frequency Effect) for the low-range effect sound. It will create a realistic sound that could be heard in the theaters and concert halls.
DOLBY DIGITAL: Select this option when you play a DVD video that has a D I G I T A L mark.
DTS: Select this option when you play a DVD player, laser disc, or CD that has a mark.
DOLBY PRO LOGIC
This surround format consists of four channels (left and right front, center, and monaural surround channels) and emphasizes the center channel. This format is very effective for panning music, conversation, and three- dimensional sound movement output from three front channels. It also simulates the atmosphere and sur- round effects of the sound reflected from the side and rear walls of the theater. Select this option when you play a VHS, VHS Hi-Fi, laser disc, or DVD video that has a
DOLBY SURROUND mark.
P R O L O G I C
Integra’s listening modes
The DTR-5.1 offers the following special Integra listening modes for the sources other than Dolby Digital and DTS sounds.
ORCHESTRA: This mode is suitable for classics and opera music. The center channel is cut and the sur- round channels are emphasized to widen the stereo image. It will simulate a natural reverberation that can be created in a large hall.
UNPLUGGED: This mode is suitable for acoustic instru- mental sounds, vocals, and jazz music. By emphasiz- ing the front stereo image, it will simulate the acoustics in front of the stage.
STUDIO-MIX: This mode is suitable for rock and popu- lar music. Lively sounds with a powerful acoustic image will make you feel as if you are in a club.
TV LOGIC: This mode offers a realistic acoustics of a TV program being aired in the TV studio. It enhances the entire surround sound and clarity of conversation. 5CH STEREO: This mode is useful for background music. The front and surround channels will create a stereo image.
STEREO
Select this mode when you do not wish to use the sur- round mode. All input sound is output from the front speakers.

A system with L/R front and center speakers

The following modes are available:

DOLBY 3 STEREO

The surround channel sound is output from the left and right front speakers.

STEREO

This is a normal stereo mode. Surround mode is cancelled.

A system with L/R front speakers

The following mode is available:

STEREO

This is a normal stereo mode.

Notes on DTS

1.If you play a CD or LD that supports DTS when the “ANALOG” setting is selected on the DTR-5.1, the DTS encoded signal will not be decoded and noise will be output. This noise could damage the amplifier and speakers. Therefore, be sure to select “DIGITAL” and use the digital input jacks (OPTICAL/COAXIAL) to connect the DTS source. (Refer to “Assigning the digi- tal input/Selecting the input signal format” on page 18.)

2.If you play a CD or LD that supports DTS when the “DIGITAL” setting is selected, you may hear a noise for a short while until the DTS decoder recognizes the DTS encoded signal and starts operating. This is not a mal- function.

3.If you press the PAUSE or SKIP button on the player while playing a DTS source, a short noise may be heard. This is not a malfunction.

4.The DTS indicator on the DTR-5.1 lights up while it plays the DTS source. When playback concludes and the DTS signal transmission stops, the DTR-5.1 remains in DTS mode and the DTS indicator remains lit. This prevents noise when you operate the PAUSE or SKIP button on the player. Therefore, if the source switches from the DTS signal to the PCM signal immediately, the PCM sig- nal may not be played. In this case, stop the playback of the source on the player for about three seconds, then resume playback.

5.Some CD players and LD players may be unable to play DTS sources correctly even if you connect the player to the DTR-5.1 digitally. This is because the digi- tal signal has been processed (such as the output level, sampling frequency, frequency response, etc.), and the DTR-5.1 cannot recognize the signal as DTS data. Therefore, you may hear noise when you play a DTS source while processing the signal.

6.The Rec Out jacks of the DTR-5.1 output analog audio. Do not record CDs or LDs that support DTS using these jacks. Otherwise, you will record a DTS encoded signal as noise.

21

Image 21
Contents DTR-5.1 Important Safeguards For U.S. model PrecautionsFor Canadian model Modele pour les CanadienSupplied accessories FeaturesInstalling the remote controller batteries Using the remote controllerBefore operating this unit Audio equipment connections Signal flowDigital audio connections Video equipment connectionsDecoder with 5.1 channel output Connecting other devicesConnecting a power cable Connecting other devicesConnections for remote control AC outlet connectionFront Speakers Connecting speakersSurround Speakers Center SpeakerPositioning speakers Connecting the powerConnecting the included antennas Connecting the antenna cableMaking antenna connections Assembling the AM loop antennaConnecting an AM outdoor antenna Connecting an FM outdoor antennaMaking antenna connections Directional IinkageSpeaker setup Setting the Config parametersConfig Setup Speaker setup Setting the Distance parametersDistance Setup Mode Audio button CH SEL button VOL q/u buttons Using the Test Tone function on the main unitTest Tone Test button Level +/- buttonsDVD Selecting a sound sourceSelecting a sound source Selecting the input signal formatWhen Multi channel input is selected as a source Using the Power On Volume functionPower on Volume Listening through headphones Phones Adjusting the tone Bass, TrebleAbout volume Volume Sleep function Remote controller onlySystem with L/R front speakers System with L/R front and center speakersDolby 3 Stereo StereoUsing Listening Mode Using Listening ModeLate Night Front Effect Setting the Listening mode parametersRe-EQ LFE level control Late NightManual tuning Tuning in a radio stationListening to a stereo radio station FM mode Display buttonMode Audio Using preset radio stationsProgramming radio stations TUNUsing preset radio stations Selecting a preset stationCancelling preset stations Recording a source Recording a source Video 2, Video Tape VCR VideoAdding new sound to a video tape during video editing Enjoying Music and Movies in the Sub-room Outline of Multi-room Remote SystemConnections in the Sub-room Speakers A/B Enjoying Music and Movies in the Sub-roomControlling the DTR-5.1 Using the remote controllerAudio Display VOLControlling an Integra/Onkyo CD player Using the remote controllerControlling an Integra/Onkyo DVD player DVDMode AUDIO/TAPE Mode SAT, CABLE, VCR, and TV buttonsMode SAT CABLE, VCR Controlling an Integra/Onkyo MD recorderProgramming procedure Mode buttons Erasing a learned code from a Mode buttonErasing a learned code ENTUsing a Macro function What is a Macro function?Programming Macro mode Programming Macro Direct Using a Macro functionUsing a Macro function Erasing all codes and operations programmed in the buttons REO Troubleshooting guideEiaj Remote ControlDisplay Control positions and namesFront panel 12 13 14Control positions and names Onkyo U.S.A. Corporation

DTR-5.1 specifications

The Integra DTR-5.1 is a high-performance AV receiver that caters to audiophiles and home theater enthusiasts. Known for its powerful sound and versatile features, the DTR-5.1 stands out in a crowded market of home theater equipment.

One of the main features of the Integra DTR-5.1 is its robust amplification system. With 7.1 channels of power, it delivers impressive sound clarity and depth across all audio formats. The unit is equipped with 100 watts per channel. This powerful output allows users to enjoy dynamic music and movie soundtracks with the kind of fidelity that brings an immersive experience to the living room.

The DTR-5.1 supports various surround sound formats, including Dolby Digital EX, DTS-ES, and Neo:6. Its ability to decode multi-channel audio formats provides an expansive soundstage, enveloping listeners in rich soundscapes. For those interested in music, the unit offers built-in equalization settings and multiple sound field modes, accommodating different preferences and listening environments.

In terms of connectivity, the Integra DTR-5.1 is loaded with features. It includes multiple HDMI inputs, allowing users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices. The presence of component, composite, and optical inputs ensures compatibility with older equipment, making it a versatile choice for any setup. The receiver supports video scaling, enabling upscaling of lower-resolution video sources to 1080p for improved picture quality on high-definition displays.

The DTR-5.1 features proprietary technologies that enhance its overall performance. The Wide Range Amplification Technology (WRAT) ensures low distortion at high volumes, while the Automatic Speaker Setup system simplifies the process of calibrating speaker levels and delays, ensuring optimal audio performance in any room layout.

Additionally, the Integra DTR-5.1 is built with a solid chassis that reduces interference, promoting cleaner sound. Its user-friendly interface and remote control provide straightforward operation, making it accessible for users of all experience levels.

In conclusion, the Integra DTR-5.1 combines powerful amplification, versatile connectivity, and advanced audio technologies, making it a remarkable choice for anyone looking to elevate their home entertainment system. With its capacity to deliver stunning sound quality and support for a wide range of audio formats, the DTR-5.1 is a flagship model that truly enhances the audio-visual experience.