Using the remote controller
1. MODE MD
MD operation buttons
Numeric keys,
ENT button
HOME THEATER CONTROLLER
Controlling an Integra/Onkyo MD recorder
Note:
Make sure that you point the transmission part on the remote controller toward the sensor area on the MD recorder.
1.Press the MODE MD/AUX button.
2.Press the desired MD operation button.
Turning the power on and off to the MD recorder
ON/STNBY | : Turning on or standby the power to |
| the MD recorder |
MD operation buttons | |
| : Track Down |
| : Track Up |
| : Playback |
| : Stop |
| : Fast reverse |
| : Fast forward |
REC | : Record |
| : Pause |
EJECT | : Eject |
1~9, +10 | : Numeric keys |
ENT | : Confirm |
You may also use the following buttons:
VOL q/u : Adjusting the volume level of the
MUTING : Muting the sound from the
1. MODE AUDIO/TAPE
TAPE operation buttons
Controlling an Integra/Onkyo tape deck
Note:
First connect an Integra/Onkyo tape deck using the connection. (See page 9.)
1.Press the MODE AUDIO/TAPE button.
2.Press the desired tape deck operation button.
TAPE operation buttons
| : Playback |
| : Stop |
| : Fast rewind |
| : Fast forward |
REC | : Recording/pause |
| : Reverse play |
You may also use the following buttons:
VOL q/u : Adjusting the volume level of the
MUTING : Muting the sound from the
MODE SAT,
CABLE, VCR,
TV
MODE SAT, CABLE, VCR, and TV buttons
No preset codes are programmed into the MODE SAT, CABLE, VCR, and TV buttons. You can use these buttons to program remote controller signals of other devices. (See page 34.)
You may use the following buttons:
VOL q/u : Adjusting the volume level of the
MUTING : Muting the sound from the
33