Troy-Bilt 24A-070F768 Setting Up Your Yard Vacuum, Opening Carton, Removing Unit From Carton

Page 6
(See Figure 1)

3

Setting Up

Your Yard

Vacuum

IMPORTANT

This unit is shipped without gasoline or

������������

������

������� ������

�������

������������

���

IMPORTANT: This unit is shipped without gasoline or oil in the engine. Be certain to service engine with gasoline and oil as instructed in the separate engine manual before operating your machine.

NOTE: Reference to right and left hand side of the Yard Vacuum is observed from the operating position.

Opening Carton

1.Cut each corner of the carton vertically from top to bottom.

2.Remove all loose parts.

3.Remove loose packing material.

Removing Unit From Carton

1.Lift unit from the rear to detach it from underlying carton material and roll unit out of carton.

2.Check carton thoroughly for any other loose parts.

NOTE: Make sure not to crimp cables while removing loose parts or the entire unit from the carton.

oil in the engine. Be

certain to service

engine with gasoline and oil as instructed in the separate engine manual before operat- ing your machine.

NOTE: Reference to right and left hand side of the Yard Vacuum is observed from the operating position.

 

�����

��������������

��������

 

 

�������������

��������������������

 

�����������������

������������

Figure 1

Loose Parts In Carton

a.Upper and Lower Handle

b.Hose Assembly

c.Safety Glasses

d.Engine Oil (May be located in bag)

e.Bag

f.Blower Chute (If Equipped)

g.Operator’s Manual

6

Image 6
Contents OPERATOR’S Manual 27/2005Table of Contents Finding and Recording Model NumberCustomer Support Safety Labels Your Responsibility Restrict the useSafe Operation Do not modify engine Your ResponsibilityRemoving Unit From Carton Setting Up Your Yard VacuumOpening Carton Loose Parts In CartonAttaching The Hose Assembly Attaching The HandleVacuum Attaching The BagAttaching The Blower Chute If EquippedOperating Your Yard Vacuum Know Your Yard VacuumGas And Oil Fill-Up Starting EngineStopping Engine To Empty Bag Using The Nozzle VacuumOperating To Remove Blower ChuteUsing The Hose Assembly Maintaining Your Yard Vacuum Engine MaintenanceNozzle Height Adjustment LubricationDrive Control Cable Adjustment Removing The Flail ScreenDisconnect and ground the spark plug wire to retaining post Sharpening Or Replacing Chipper BladeStoring Your Yard Vacuum Problem Cause Remedy For parts and/or Accessories Please call Model To order replacement Parts, contact Or visit Saddle Washer, .320Model Bag Assembly 40 -0962 Compression Spring 41 -0778A Mounting BracketMANUFACTURER’S Limited Warranty for U.S.A Canada