Eliminator SE Series, HOW They Work, Trion SE800E

Eliminator SE Series

Section I – Design

1. Introduction

The Trion Eliminator SE400E & SE800E are commercial air purifiers that have been specifically designed to remove airborne pollutants - including tobacco smoke, dust, pollen and mold spores - in rooms and areas where people work or relax. They are designed to be mounted onto a solid ceiling, semi-recessed for into a suspended ceiling, or wall mounted (SE400E only). Where appropriate they can also draw in additional fresh air.

Their features make them the ideal air purifier for installations into areas such as offices, conference rooms, restaurants, designated smoking areas, institutions and waiting rooms or any other place where people gather.

HOW THEY WORK

The Trion SE400E & SE800E utilize the principle of Electrostatic Precipitation. Air is drawn into the intake, through the metal prefilter, which traps lint and large dust particles. The remaining particles, some as small as 0.01 microns*, pass into a strong electrical field (ionizing section) where the particles receive an electrical charge. The charged particles pass onto a series of equally spaced parallel plates (collector section). Each alternate plate is charged with the same polarity as the particles, which are repelled, while the interleaving plates are grounded, and therefore attract and collect the particles.

*The diameter of a human hair is about 100 micron!

2. The Filter System

There are two filters in your air cleaner - THE PRE-FILTER:This is the mechanical filter that lies behind the inlet grill. It is designed to remove large particles and can be washed many times before replacement.

THE ELECTROSTATIC FILTER: This is the deep aluminum assembly (Collector Cell) located immediately behind the pre-filter and is the heart of your air cleaner. It uses an electrostatic charge to remove particles so small that it would take a pile of many millions to cover a pinhead. When dirty it can be washed and reused indefinitely.

FILTER REMOVAL

TRION SE400E

Turn the control switch off before removing cell. Press the two cell access latches and the hinged door will swing down. Remove pre-filter by turning pre-filter clip 90 degrees (fig 2). While supporting the weight of the Collector Cell, loosen the filter retaining screw (fig 3). The filter retaining plate will now open allowing the filter to be removed (fig 4). To reinstall the filter, simply reverse above procedure.

TRION SE800E

The two hinged access doors are secured with retaining screws (fig 3). Release screws to allow the doors to swing down. Remove the Collector Cells as described above.

INSTALLATION LOCATION

The most effective location for the air purifier is the center of the area to be cleaned because the dirty air is pulled into the center of the unit and discharged equally out the four sides. If more than one unit is required, space them evenly over the area to be cleaned.

SE800E, SE400E specifications

The Trion SE400E and SE800E are advanced air purification systems designed for commercial and industrial applications. These models are part of Trion's innovative lineup that combines cutting-edge technology with practical functionality to ensure superior air quality in various settings.

One of the standout features of the Trion SE400E and SE800E is their high-efficiency particulate air (HEPA) filtration capability. Both models are equipped with pre-filters and HEPA filters that capture 99.97 percent of particles down to 0.3 microns in size, including dust, pollen, smoke, and other airborne contaminants. This level of filtration is essential in environments where air quality is paramount, such as hospitals, schools, and manufacturing plants.

In addition to HEPA filtration, these units employ electrostatic precipitation technology, enhancing their ability to remove smaller particles that traditional filters may miss. This dual-action filtration system not only improves air quality but also reduces the frequency and costs associated with filter replacement, making it a cost-effective choice for long-term use.

The design of the SE400E and SE800E models is another noteworthy aspect. Both units feature a compact and modular design, allowing for easy installation in various facilities with limited space. They can be mounted on walls or ceilings, providing versatile placement options that do not interfere with the normal operations of the facility.

Furthermore, these air purifiers are equipped with user-friendly controls that allow for easy operation and monitoring. Users can easily adjust fan speeds, set timers, and check filter replacement indicators, facilitating seamless integration into existing air management systems.

The energy efficiency of the Trion SE400E and SE800E is also a key characteristic. These air purification systems are designed to minimize energy consumption while delivering maximum performance, reducing the overall environmental footprint.

Durability and reliability are important traits of the Trion SE400E and SE800E. Built from high-quality materials, these units are engineered to withstand the rigors of daily use in demanding environments, ensuring a long lifespan with minimal maintenance requirements.

In summary, the Trion SE400E and SE800E air purification systems are exemplary models that combine advanced filtration technology, space-saving design, user-friendly control features, energy efficiency, and durability. They provide an effective solution for maintaining high air quality in a variety of commercial and industrial applications, making them a valuable investment for any facility focused on health and safety.