Shindaiwa X7502891200, PS344 manual Hour Maintenance Remove and replace the fuel filter element

Page 14

Maintenance (continued)

10/15-Hour Maintenance

Remove and clean or replace the spark plug.

■■Adjust the spark plug electrode gap to 0.024 inch (0.6 mm). If the spark plug must be replaced, use only an NGK CMR5H or equivalent resistor type spark plug of the correct heat range.

CAUTION!

Before removing the spark plug, clean the area around the plug to prevent dirt and debris from getting into the engine’s internal parts.

NOTE:

The NGK CMR5H also meets the requirements for electro magnetic com- pliance (EMC).

0.024 inch

(0.6 mm)

Clean the spark plug and check the gap at the electrode.

50-Hour Maintenance

Remove and replace the fuel filter element.

■■Use a hooked wire to extract the fuel filter from inside the fuel tank. Inspect the fuel filter element. If it shows signs of contamination from debris, replace it with a genuine Shindaiwa replacement fuel filter

element.

CAUTION!

Make sure you do not pierce the fuel line with the end of the hooked wire. The line is delicate and can be dam- aged easily.

Hooked wire

Fuel filter element

Fuel filter maintenance

Before reinstalling the filter, inspect the fuel line. If you discover dam- age or deterioration, the unit should be removed from service unitl it can be inspected by a Shindaiwa- trained service technician.

135 hour maintenance

■■Combustion chamber should be decarbonized, and the valve clear- ance should be adjusted. It is highly recommended that this is done

by a Shindaiwa-trained service technician.

■■Replace the spark plug annually. See the section “10 -15 Hour Main- tenance” for instructions.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents PS344 PowerBroomTM Contents IntroductionWork Safely SafetySafety Labels Use Good JudgementProperly Equipped Operator Be Aware of the Working EnvironmentSpecifications Product DescriptionAdjustable Handle AssemblyPrior to assembly Emission Control Exhaust & EvaporativeAdjust Throttle Trigger Free Play Sweeper Assembly sold separatelyMixing Fuel Fuel RequirementsAfter use Filling the fuel tankHandling Fuel Minimize the Risk of FireStarting the Engine Checking Unit Condition When the Engine StartsStopping the Engine If the engine does not startBreak-in and Operation Optional accessories Debris shieldOperating Operating TechniquesMaintenance Hour Maintenance Remove and replace the fuel filter element Hour maintenanceOverfill Hour maintenance Valve AdjustmentHour maintenance Gearcase Lubrication Replacing the gearcase oilEngine Break-In Carburetor AdjustmentMuffler Maintenance High Altitude OperationLong Term Storage Adjusting Engine IdleIdle Speed Adjustment Troubleshooting Guide Possible CauseIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 01/2010 Servicing Information Parts/Serial Number

X7502891200, PS344 specifications

The Shindaiwa PS344 is an exceptional piece of equipment known for its high performance and reliability in the world of professional landscaping and maintenance. Designed for users who demand power and efficiency, the PS344 has become a go-to choice for both commercial and residential applications.

One of the standout features of the Shindaiwa PS344 is its powerful engine. Equipped with a 34.4cc two-stroke engine, this model delivers an impressive power-to-weight ratio, which translates into efficient operation and lower fatigue for the user during prolonged usage. The engine is also designed to provide robust torque at all RPMs, ensuring that the PS344 can tackle tough jobs with ease.

The design of the PS344 also emphasizes user comfort and control. It features an ergonomic handle with a soft grip, allowing for better handling and reduced vibration during operation. This thoughtful design minimizes user fatigue, making it easier to work for extended periods without discomfort. Additionally, the balanced design of the unit enhances maneuverability, making it suitable for a wide variety of tasks from trimming to shaping and edging.

In terms of technology, the PS344 incorporates Shindaiwa's advanced acoustic design, resulting in lower noise levels during operation. This feature is particularly beneficial for users working in noise-sensitive environments, as it allows them to work without disturbing others nearby. Moreover, the PS344 is equipped with a fuel-efficient engine that not only reduces emissions but also lowers operating costs, making it an environmentally friendly choice.

Another notable characteristic of the Shindaiwa PS344 is its ease of maintenance. The design includes convenient access to air filters and spark plugs, simplifying the upkeep process. This ensures that users can keep their equipment in peak condition without the hassle of complicated procedures.

Overall, the Shindaiwa PS344 stands out as a robust, efficient, and user-friendly solution for professionals in landscaping and maintenance. Its combination of power, ergonomic design, advanced technology, and low maintenance needs makes it an investment worth considering for anyone looking to enhance their productivity while achieving professional-grade results. Whether you're a seasoned landscaper or a weekend gardener, the PS344 promises to deliver exceptional performance for all your trimming and edging tasks.
Top Page Image Contents