Shindaiwa PS344, X7502891200 manual 01/2010

Page 23

ECHO INCORPORATED EMISSION CONTROL WARRANTY STATEMENT

FOR ECHO AND SHINDAIWA BRANDS

The Environmental Protection Agency (EPA) and the California Air Resources Board (C.A.R.B.) and ECHO Incorporated (ECHO Inc.) are pleased to explain the emission control system warranty on your 2010 and later equipment/small off-road engine (SORE). New equipment/SORE must be designed, built and equipped to meet stringent EPA and C.A.R.B. anti-smog standards. ECHO Inc. must warrant the emission control system on your equipment/SORE for the periods of time listed below, provided there has been no abuse, neglect or improper maintenance of your equipment/ SORE. Your emission control system may include parts such as: carburetor, fuel-injection system, ignition system, catalytic converter/muffler, fuel tank, fuel feed lines, fuel cap assembly, spark plug, air filters, and other associated components. Where a warrantable condition exists, ECHO Inc will repair your equipment/SORE at no cost to you including diagnosis, parts and labor. The Emission Control System warranty is extended to the original owner including all subsequent owners.

MANUFACTURER'S WARRANTY COVERAGE:

The emission control system is warranted for 2 years or the length of the ECHO Inc. warranty, whichever is longer. If any emission-related part on your equipment is defective, the part will be repaired or replaced by ECHO Inc. or its Authorized Service Representative.

OWNER'S WARRANTY RESPONSIBILITIES:

As the equipment/SORE owner, you are responsible for the performance of the required maintenance listed in your Operator's Manual. ECHO Inc. recommends that you retain all receipts covering maintenance on your equipment/SORE however, ECHO Inc. cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance. As the equipment/SORE owner, you should be aware that ECHO Inc. may deny you warranty coverage if your equipment/SORE or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications.

You are responsible for presenting your equipment/SORE to an ECHO Inc. authorized service representative as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. If a warrantable condition exists and there is no Authorized Dealer within 100 miles, ECHO Inc. will pay to ship the unit to the nearest authorized dealer. If you have questions regarding your warranty coverage, you should contact ECHO Inc. at 1-800-673-1558, web site WWW.ECHO-USA.COM or contact Shindaiwa at 1-877-986- 7783, web site WWW.SHINDAIWA.COM.

WHAT DOES THIS WARRANTY COVER?

ECHO Inc. warrants that your equipment/SORE was designed, built and equipped to conform with applicable EPA and C.A.R.B. emissions standards and that your equipment/SORE is free from defects in material and workmanship that would cause it to fail to conform with applicable requirements for 2 years or the length of the ECHO Inc. warranty, whichever is longer. The warranty period begins on the date the product is purchased by an end user.

HOW WILL A COVERED PART BE CORRECTED?

If there is a defect in a part covered by this warranty, any ECHO Inc. Authorized Service Dealer will correct the defect. You will not have to pay anything to have the part adjusted, repaired or replaced. This includes any labor and diagnosis for warranted repairs performed by the dealer. In addition, engine parts not expressly covered under this warranty but whose failure is a result of a failure of a covered part will be warranted.

WHAT PARTS ARE COVERED?

Any applicable emission related part not scheduled for "required maintenance" will be repaired or replaced within the warranty period. The repaired or replaced part will be warranted for the remaining ECHO Inc. warranty period.

Any warranted part that is scheduled only for regular inspection in the written instructions supplied is warranted for the warranty period stated above. Any such part repaired or replaced under warranty will be warranted for the remaining ECHO Inc. warranty period.

Any emission related part scheduled for replacement during "required maintenance" is warranted for the period of time prior to the first scheduled replacement point for that part. Any such part repaired or replaced under warranty shall be warranted for the remainder of the period prior to the first scheduled replacement point for that part.

Any manufacturer-approved replacement part may be used in the performance of any warranty maintenance or repairs on emission related parts, and must be provided without charge if the part is still under warranty.

Any replacement part that is equivalent in performance and durability may be used in non-warranty maintenance or repairs, and shall not reduce the warranty obligations of the manufacturer.

Throughout the equipment/SORE warranty period, ECHO Inc. will maintain a supply of warranted parts sufficient to meet the expected demand for such parts.

SPECIFIC EMISSION RELATED WARRANTED PARTS:

 

• Electronic Ignition System

• Spark Plug

• Catalytic Converter / Muffler Assembly

• Carburetor (complete assembly or replaceable components)

• Choke

• Fuel-Injection Assembly (or replaceable components)

• Fuel Tank

• Fuel Cap Assembly

• Air Filter

• Fuel Feed Line (and associated clamps/connectors as applicable)

WHAT IS NOT COVERED?

Any failure caused by abuse, neglect, improper maintenance, unapproved modifications, use of unapproved add-on parts/modified parts or unapproved accessories.

This Emission Control Warranty is valid only for the U.S.A., it's Territories, and Canada.

99922201033

 

01/2010

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents PS344 PowerBroomTM Introduction ContentsUse Good Judgement SafetySafety Labels Work SafelyBe Aware of the Working Environment Properly Equipped OperatorProduct Description SpecificationsEmission Control Exhaust & Evaporative AssemblyPrior to assembly Adjustable HandleSweeper Assembly sold separately Adjust Throttle Trigger Free PlayFuel Requirements Mixing FuelMinimize the Risk of Fire Filling the fuel tankHandling Fuel After useStarting the Engine If the engine does not start When the Engine StartsStopping the Engine Checking Unit ConditionOperating Techniques Optional accessories Debris shieldOperating Break-in and OperationMaintenance Hour maintenance Hour Maintenance Remove and replace the fuel filter elementReplacing the gearcase oil Hour maintenance Valve AdjustmentHour maintenance Gearcase Lubrication OverfillHigh Altitude Operation Carburetor AdjustmentMuffler Maintenance Engine Break-InLong Term Storage Adjusting Engine IdleIdle Speed Adjustment Possible Cause Troubleshooting GuideIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 01/2010 Parts/Serial Number Servicing Information

X7502891200, PS344 specifications

The Shindaiwa PS344 is an exceptional piece of equipment known for its high performance and reliability in the world of professional landscaping and maintenance. Designed for users who demand power and efficiency, the PS344 has become a go-to choice for both commercial and residential applications.

One of the standout features of the Shindaiwa PS344 is its powerful engine. Equipped with a 34.4cc two-stroke engine, this model delivers an impressive power-to-weight ratio, which translates into efficient operation and lower fatigue for the user during prolonged usage. The engine is also designed to provide robust torque at all RPMs, ensuring that the PS344 can tackle tough jobs with ease.

The design of the PS344 also emphasizes user comfort and control. It features an ergonomic handle with a soft grip, allowing for better handling and reduced vibration during operation. This thoughtful design minimizes user fatigue, making it easier to work for extended periods without discomfort. Additionally, the balanced design of the unit enhances maneuverability, making it suitable for a wide variety of tasks from trimming to shaping and edging.

In terms of technology, the PS344 incorporates Shindaiwa's advanced acoustic design, resulting in lower noise levels during operation. This feature is particularly beneficial for users working in noise-sensitive environments, as it allows them to work without disturbing others nearby. Moreover, the PS344 is equipped with a fuel-efficient engine that not only reduces emissions but also lowers operating costs, making it an environmentally friendly choice.

Another notable characteristic of the Shindaiwa PS344 is its ease of maintenance. The design includes convenient access to air filters and spark plugs, simplifying the upkeep process. This ensures that users can keep their equipment in peak condition without the hassle of complicated procedures.

Overall, the Shindaiwa PS344 stands out as a robust, efficient, and user-friendly solution for professionals in landscaping and maintenance. Its combination of power, ergonomic design, advanced technology, and low maintenance needs makes it an investment worth considering for anyone looking to enhance their productivity while achieving professional-grade results. Whether you're a seasoned landscaper or a weekend gardener, the PS344 promises to deliver exceptional performance for all your trimming and edging tasks.
Top Page Image Contents