Shindaiwa X7502891200, PS344 Emission Control Exhaust & Evaporative, Assembly, Prior to assembly

Page 6

Emission Control (Exhaust & Evaporative)

EPA 2010 and Later and/or C.A.R.B. TIER III

The emission control system for the engine is EM/TWC (Engine Modification and 3-way Catalyst) and for the fuel tank the Control System is EVAP (Evaporative Emissions) or N (for nylon tank). Evaporative emission may be applicable to California models only.

An Emission Control Label is located on the unit. (This is an EXAMPLE ONLY; information on label varies by en- gine FAMILY).

PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)

The 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as listed in the Maintenance Section of this manual.

Assembly

Prior to assembly

Before assembling, make sure you have all the components required for a com- plete unit:

■■PowerBroomUnit

■■Kit with this manual and tool kit for routine maintenance..

■■Carefully inspect all components for damage before assembling.

WARNING!

Do not make unauthorized modifications or alterations to your machine or its components.

IMPORTANT!

Adjustable Handle

This unit comes with the handle installed. It can be re-adjusted for operator comfort in the following manner.

1.Loosen adjustment knob. Locate the handle at the best position for operator comfort (usually about 10 inches ahead of the throttle trigger), and secure it by tightening the adjustment knob at the handle base.

The terms “left”, “left-hand”, and “LH”; “right”, “right-hand”, and “RH”; “front” and “rear” refer to directions as viewed by the operator during normal operation.

Handle

Throttle Assembly

Mounting Screw

Washer

Adjustment Knob

Washer

Hex Nut

Outer Tube

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents PS344 PowerBroomTM Contents IntroductionWork Safely SafetySafety Labels Use Good JudgementProperly Equipped Operator Be Aware of the Working EnvironmentSpecifications Product DescriptionAdjustable Handle AssemblyPrior to assembly Emission Control Exhaust & EvaporativeAdjust Throttle Trigger Free Play Sweeper Assembly sold separatelyMixing Fuel Fuel RequirementsAfter use Filling the fuel tankHandling Fuel Minimize the Risk of FireStarting the Engine Checking Unit Condition When the Engine StartsStopping the Engine If the engine does not startBreak-in and Operation Optional accessories Debris shieldOperating Operating TechniquesMaintenance Hour Maintenance Remove and replace the fuel filter element Hour maintenanceOverfill Hour maintenance Valve AdjustmentHour maintenance Gearcase Lubrication Replacing the gearcase oilEngine Break-In Carburetor AdjustmentMuffler Maintenance High Altitude OperationAdjusting Engine Idle Idle Speed AdjustmentLong Term Storage Troubleshooting Guide Possible CauseIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 01/2010 Servicing Information Parts/Serial Number

X7502891200, PS344 specifications

The Shindaiwa PS344 is an exceptional piece of equipment known for its high performance and reliability in the world of professional landscaping and maintenance. Designed for users who demand power and efficiency, the PS344 has become a go-to choice for both commercial and residential applications.

One of the standout features of the Shindaiwa PS344 is its powerful engine. Equipped with a 34.4cc two-stroke engine, this model delivers an impressive power-to-weight ratio, which translates into efficient operation and lower fatigue for the user during prolonged usage. The engine is also designed to provide robust torque at all RPMs, ensuring that the PS344 can tackle tough jobs with ease.

The design of the PS344 also emphasizes user comfort and control. It features an ergonomic handle with a soft grip, allowing for better handling and reduced vibration during operation. This thoughtful design minimizes user fatigue, making it easier to work for extended periods without discomfort. Additionally, the balanced design of the unit enhances maneuverability, making it suitable for a wide variety of tasks from trimming to shaping and edging.

In terms of technology, the PS344 incorporates Shindaiwa's advanced acoustic design, resulting in lower noise levels during operation. This feature is particularly beneficial for users working in noise-sensitive environments, as it allows them to work without disturbing others nearby. Moreover, the PS344 is equipped with a fuel-efficient engine that not only reduces emissions but also lowers operating costs, making it an environmentally friendly choice.

Another notable characteristic of the Shindaiwa PS344 is its ease of maintenance. The design includes convenient access to air filters and spark plugs, simplifying the upkeep process. This ensures that users can keep their equipment in peak condition without the hassle of complicated procedures.

Overall, the Shindaiwa PS344 stands out as a robust, efficient, and user-friendly solution for professionals in landscaping and maintenance. Its combination of power, ergonomic design, advanced technology, and low maintenance needs makes it an investment worth considering for anyone looking to enhance their productivity while achieving professional-grade results. Whether you're a seasoned landscaper or a weekend gardener, the PS344 promises to deliver exceptional performance for all your trimming and edging tasks.
Top Page Image Contents