Shindaiwa X7502891200, PS344 manual Mixing Fuel, Fuel Requirements

Page 8

Assembly (continued)

1.Push one of the drum axles onto either of the two gearcase output shafts. If necessary, rotate the drum axle until the clevis pin hole in the axle aligns with the matching hole in the gearcase output shaft.

CAUTION!

The two drum assemblies are identical, but each drum must be installed with its recessed end facing toward the gearcase.

Mixing Fuel

2.Use a clevis pin and hitch pin to secure the drum axle to the shaft.

3.Slide the recessed end of a sweeper drum assembly over the installed axle, and then push the drum down the axle until the cotter pin hole in the axle extends above the drum surface.

4.Use a cotter pin to secure the drum assembly on the axle (see inset).

The cotter pin is designed to fit tightly against the outboard end of the drum, so you may need to com- press the drum face slightly during installation. spead the ends of the cotter pin to secure.

5.Repeat Steps 1-4 to install the remaining axle and drum assembly.

The PowerBroom tool should now be

completely assembled.

WARNING!

Alternative fuels, such as E15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting Shindaiwa requirements are NOT approved for use in Shindaiwa gasoline engines. Use of alternative fuels may cause

performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carburetors and other engine components.

Fuel Requirements

Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood alcohol) is NOT approved.

Hybrid 4TM Mixture Oil - Engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345/FD standards must be used. Shindaiwa highly recommends using Shindaiwa Red ArmorTM engine oil in all Shindaiwa Hybrid 4TM engines to protect the engine from harmful carbon build up, maintain engine performance, and increase engine life. Shindaiwa Red ArmorTM engine oil exceeds ISO-L-EGD and J.A.S.O. M345/FD performance requirements. Engine problems due to inadequate lubrication caused by failure to use an ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345/FD certified oil will void the engine warranty.

 

Examples of 50:1 mixing quantities

IMPORTANT!

Shindaiwa Red ArmorTM engine oil may be mixed at 50:1 ratio for application in all Shindaiwa engines sold in the past, regardless of ratio specified in those manuals.

IMPORTANT!

Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when a fuel stabilizer is added. Use of unmixed, improp- erly mixed, or stale fuel, may cause hard starting, poor performance, or severe engine damage and void the product warranty. Read and follow instructions in the Long Term Storage section of this manual.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents PS344 PowerBroomTM Contents IntroductionSafety Safety LabelsWork Safely Use Good JudgementProperly Equipped Operator Be Aware of the Working EnvironmentSpecifications Product DescriptionAssembly Prior to assemblyAdjustable Handle Emission Control Exhaust & EvaporativeAdjust Throttle Trigger Free Play Sweeper Assembly sold separatelyMixing Fuel Fuel RequirementsFilling the fuel tank Handling FuelAfter use Minimize the Risk of FireStarting the Engine When the Engine Starts Stopping the EngineChecking Unit Condition If the engine does not startOptional accessories Debris shield OperatingBreak-in and Operation Operating TechniquesMaintenance Hour Maintenance Remove and replace the fuel filter element Hour maintenanceHour maintenance Valve Adjustment Hour maintenance Gearcase LubricationOverfill Replacing the gearcase oilCarburetor Adjustment Muffler MaintenanceEngine Break-In High Altitude OperationLong Term Storage Adjusting Engine IdleIdle Speed Adjustment Troubleshooting Guide Possible CauseIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 01/2010 Servicing Information Parts/Serial Number

X7502891200, PS344 specifications

The Shindaiwa PS344 is an exceptional piece of equipment known for its high performance and reliability in the world of professional landscaping and maintenance. Designed for users who demand power and efficiency, the PS344 has become a go-to choice for both commercial and residential applications.

One of the standout features of the Shindaiwa PS344 is its powerful engine. Equipped with a 34.4cc two-stroke engine, this model delivers an impressive power-to-weight ratio, which translates into efficient operation and lower fatigue for the user during prolonged usage. The engine is also designed to provide robust torque at all RPMs, ensuring that the PS344 can tackle tough jobs with ease.

The design of the PS344 also emphasizes user comfort and control. It features an ergonomic handle with a soft grip, allowing for better handling and reduced vibration during operation. This thoughtful design minimizes user fatigue, making it easier to work for extended periods without discomfort. Additionally, the balanced design of the unit enhances maneuverability, making it suitable for a wide variety of tasks from trimming to shaping and edging.

In terms of technology, the PS344 incorporates Shindaiwa's advanced acoustic design, resulting in lower noise levels during operation. This feature is particularly beneficial for users working in noise-sensitive environments, as it allows them to work without disturbing others nearby. Moreover, the PS344 is equipped with a fuel-efficient engine that not only reduces emissions but also lowers operating costs, making it an environmentally friendly choice.

Another notable characteristic of the Shindaiwa PS344 is its ease of maintenance. The design includes convenient access to air filters and spark plugs, simplifying the upkeep process. This ensures that users can keep their equipment in peak condition without the hassle of complicated procedures.

Overall, the Shindaiwa PS344 stands out as a robust, efficient, and user-friendly solution for professionals in landscaping and maintenance. Its combination of power, ergonomic design, advanced technology, and low maintenance needs makes it an investment worth considering for anyone looking to enhance their productivity while achieving professional-grade results. Whether you're a seasoned landscaper or a weekend gardener, the PS344 promises to deliver exceptional performance for all your trimming and edging tasks.
Top Page Image Contents