Shindaiwa PS344 manual Filling the fuel tank, Handling Fuel, After use, Minimize the Risk of Fire

Page 9

Handling Fuel

DANGER

Fuel is VERY flammable. Use extreme care when mixing, storing or handling or serious personal injury

may result.

•Use an approved fuel container.

•DO NOT smoke near fuel.

•DO NOT allow flames or sparks near fuel.

•Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to equalize.

•NEVER refuel a unit when the engine is HOT or RUNNING!

•DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors over bare ground.

•DO NOT overfill fuel tank. Wipe up spills immediately.

•Securely tighten fuel tank cap and close fuel container after refueling.

•Inspect for fuel leakage. If fuel leakage is found, do not start or operate unit until leakage is repaired.

•Move at least 3m (10 ft.) from refueling location before starting the engine.

Mixing Instructions

1.Fill an approved fuel container with half of the required amount of gasoline.

2.Add the proper amount of engine oil to gasoline.

3.Close container and shake to mix oil with gasoline.

4.Add remaining gasoline, close fuel container, and remix.

IMPORTANT!

Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut- off containers to reduce fuel spillage.

After use

Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area. As a precaution, store fuel in an approved, airtight con- tainer. Store in a well-ventilated, unoccupied building,

away from sparks and flames.

IMPORTANT!

Stored fuel may separate. ALWAYS shake fuel container thoroughly before each use.

■■DO NOT store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel storage container.

Filling the fuel tank

WARNING!

Minimize the Risk of Fire

■■NEVER smoke or light fires near the engine.

■■ALWAYS stop the engine and allow it to cool before refueling.

■■ALWAYS Wipe all spilled fuel and move at least 3 meters (10 feet) from the fueling point and source before starting.

■■NEVER place flammable material close to the engine muffler.

■■NEVER operate the engine without the muffler and spark arrester screen in place and in good working condition.

■■FUEL IS HIGHLY FLAMMABLE.

■■ALWAYS store gasoline in a container approved for flammable liquids.

■■ALWAYS inspect the unit for fuel leaks before each use. During each refill, check that no fuel leaks from around the fuel cap and/or fuel tank.

If fuel leaks are evident, stop using the unit immedi- ately. Fuel leaks must be repaired before using the unit.

■■ALWAYS move the unit at least 3 meters (10 feet) away from a fuel storage area or other readily flam- mable materials before starting

the engine.

1.Place the unit on a flat, level surface.

2.Clear any dirt or other debris from around the fuel filler cap.

CAUTION!

Slowly remove the fuel cap only after stopping the engine

3.Remove the fuel cap, and fill the tank with clean, fresh fuel.

4.Reinstall the fuel filler cap and tighten firmly.

5.Wipe away any spilled fuel before starting engine.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents PS344 PowerBroomTM Introduction ContentsSafety Labels SafetyWork Safely Use Good JudgementBe Aware of the Working Environment Properly Equipped OperatorProduct Description SpecificationsPrior to assembly AssemblyAdjustable Handle Emission Control Exhaust & EvaporativeSweeper Assembly sold separately Adjust Throttle Trigger Free PlayFuel Requirements Mixing FuelHandling Fuel Filling the fuel tankAfter use Minimize the Risk of FireStarting the Engine Stopping the Engine When the Engine StartsChecking Unit Condition If the engine does not startOperating Optional accessories Debris shieldBreak-in and Operation Operating TechniquesMaintenance Hour maintenance Hour Maintenance Remove and replace the fuel filter elementHour maintenance Gearcase Lubrication Hour maintenance Valve AdjustmentOverfill Replacing the gearcase oilMuffler Maintenance Carburetor AdjustmentEngine Break-In High Altitude OperationAdjusting Engine Idle Idle Speed AdjustmentLong Term Storage Possible Cause Troubleshooting GuideIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 01/2010 Parts/Serial Number Servicing Information

X7502891200, PS344 specifications

The Shindaiwa PS344 is an exceptional piece of equipment known for its high performance and reliability in the world of professional landscaping and maintenance. Designed for users who demand power and efficiency, the PS344 has become a go-to choice for both commercial and residential applications.

One of the standout features of the Shindaiwa PS344 is its powerful engine. Equipped with a 34.4cc two-stroke engine, this model delivers an impressive power-to-weight ratio, which translates into efficient operation and lower fatigue for the user during prolonged usage. The engine is also designed to provide robust torque at all RPMs, ensuring that the PS344 can tackle tough jobs with ease.

The design of the PS344 also emphasizes user comfort and control. It features an ergonomic handle with a soft grip, allowing for better handling and reduced vibration during operation. This thoughtful design minimizes user fatigue, making it easier to work for extended periods without discomfort. Additionally, the balanced design of the unit enhances maneuverability, making it suitable for a wide variety of tasks from trimming to shaping and edging.

In terms of technology, the PS344 incorporates Shindaiwa's advanced acoustic design, resulting in lower noise levels during operation. This feature is particularly beneficial for users working in noise-sensitive environments, as it allows them to work without disturbing others nearby. Moreover, the PS344 is equipped with a fuel-efficient engine that not only reduces emissions but also lowers operating costs, making it an environmentally friendly choice.

Another notable characteristic of the Shindaiwa PS344 is its ease of maintenance. The design includes convenient access to air filters and spark plugs, simplifying the upkeep process. This ensures that users can keep their equipment in peak condition without the hassle of complicated procedures.

Overall, the Shindaiwa PS344 stands out as a robust, efficient, and user-friendly solution for professionals in landscaping and maintenance. Its combination of power, ergonomic design, advanced technology, and low maintenance needs makes it an investment worth considering for anyone looking to enhance their productivity while achieving professional-grade results. Whether you're a seasoned landscaper or a weekend gardener, the PS344 promises to deliver exceptional performance for all your trimming and edging tasks.
Top Page Image Contents