Snapper 1726315-02, 1694496 manual Initial Setup & Assembly, Assemble & Install Deflector

Page 7

Assemble & Install Deflector

1.The two holes for mounting the deflector must be drilled out. Turn the deflector over, and notice that these two holes are started. Finishing drilling the two 11/32 inch holes (See Figure 4).

2.See Figure 4. Connect the deflector (A) to the deflec- tor brackets (O) with two 5/16-18 x 7/8 screws (F), 5/16 lockwashers (G), and 5/16 nuts (H). Install screws from the bottom.

3.Install two 7/16-14 x 2-1/4 capscrews (I), 7/16 lock- washers (J), and 7/16 nuts (K) as shown. Capscrews must be installed with lockwashers and nuts on the inside as shown in Figure 4.

4.Mark and drill two 13/32 holes (S & R) in mower deck. Use Template on page 9. Attach the front pivot bracket (B) using 3/8-16 x 1 carriage bolts, lock- washers, and nuts inserted through hole “S” see Figure 4).

Initial Setup & Assembly

5.Attach the back pivot bracket (C) to the existing hole in the mower deck formerly used to mount the deflec- tor rod. Attach using 3/8-16 x 7/8 carriage bolts, lockwashers, and nuts inserted through hole “P” (See Figure 4).

6.Use the hinge rod (D) to align the front and back pivot brackets (B and C) as shown.

7.Using the bracket for guidance, drill out hole “Q” using a 13/32” drill.

8.In the new drilled hole, install /8-16 x 1 capscrews (L), lockwasher (M), and nut (N). Install capscrew from the bottom.

9.Install the deflector (A) assembly. Insert the rod (D) through the brackets (B, O, and C) and spring (E). Secure with a cotter pin at each end.

10.Hook the spring on the rear deflector bracket (O), pre-load one turn, and hook second end on back pivot bracket (C).

 

 

 

N

C

 

 

 

M

 

 

 

 

E

 

 

 

 

 

Hole “P”

 

B

 

 

 

N

 

K

J

Hole “Q”

 

 

 

 

 

 

L

 

 

 

 

M

 

 

 

I

 

 

 

 

O

Hole “R”

 

 

 

 

D

 

 

 

 

 

 

 

H

 

 

 

 

G

 

L

 

 

 

 

 

O

 

 

 

Hole “S”

 

 

 

A

 

F

 

Drill These 11/32” Holes From Back

 

 

 

Figure 4. Deflector

 

 

 

A. Deflector

F. Capscrew,

I. Capscrew,

L. Capscrew,

B. Pivot Bracket, Front.

5/16-18 x 7/8

7/16-14 x 2-3/4

3/8-16 x 1

C. Pivot Bracket, Back

G. Lockwasher,

J. Lockwasher, 7/16

M. Lockwasher, 3/8

D. Hinge Rod

5/16

K. Nut, 7/16-14

N. Nut, 3/8-16

E. Spring

H. Nut, 5/16-18

 

O. Deflector Bracket

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents OPERATOR’S Manual Page Table of Contents Safety Decals Safety Rules InformationOperating Without the Turbo Recommended AccessoriesBefore Operation Mowing with the TurboPrepare the Deck, Belt Cover, & Support Arm Assembly Initial Setup & AssemblyInstall Stacked Arbor Pulley Assemble & Install Deflector Initial Setup & AssemblyAssemble Turbo Bracket Hardware PlacementRemoving the Turbo Attaching the TurboStorage AdjustmentsPulley Adjustments Upstop AdjustmentFront Bracket Hole Template Page Page Page

1726315-02, 1694496 specifications

Snapper 1694496,1726315-02 is an innovative product designed to meet the increasing demands of today's technology-driven landscape. This highly efficient device boasts a range of features and characteristics that make it a standout choice for various applications.

At the heart of the Snapper 1694496,1726315-02 is its advanced engineering, which is evident in its robust build quality and sleek design. This product is particularly known for its high performance, ensuring reliability under various operating conditions. The use of durable materials not only enhances the longevity of the device but also minimizes the need for frequent replacements.

One of the standout technologies integrated into the Snapper 1694496,1726315-02 is its state-of-the-art motor system. This motor is designed for optimal energy efficiency, allowing users to benefit from lower operational costs while maintaining high performance. The device operates quietly, making it suitable for noise-sensitive environments.

Another notable characteristic is its user-friendly interface. The Snapper 1694496,1726315-02 is equipped with intuitive controls that allow for easy navigation and operation. Users can quickly adjust settings to match specific requirements, making it accessible to both novice and experienced users alike.

The product also features advanced connectivity options, which enable seamless integration with smart technologies. This connectivity facilitates remote monitoring and control, enhancing usability and convenience. Users can easily access performance data and make adjustments through mobile applications or web interfaces.

Moreover, the Snapper 1694496,1726315-02 incorporates safety features that ensure secure operation. These features include overload protection and automatic shut-off mechanisms, which prevent potential damage to the device and promote user safety.

In addition to its impressive technical specifications, this device is also designed with sustainability in mind. Its energy-efficient operation aligns with modern environmental standards, making it an ideal choice for eco-conscious consumers and businesses.

In conclusion, the Snapper 1694496,1726315-02 embodies a blend of advanced features, innovative technologies, and user-centric design. Whether for personal use or in a professional setting, this product delivers exceptional performance and reliability, addressing the diverse needs of today's users. With its focus on efficiency, connectivity, and safety, it represents a valuable addition to any technology arsenal.
Top Page Image Contents