Snapper 1726315-02, 1694496 manual Attaching the Turbo, Removing the Turbo

Page 9

Attaching & Removing the Turbo

ATTACHING THE TURBO

1.Lift up the deflector.

2.Engage the stone guard hook at the bottom of the turbo as shown in Figure 8.

3.Slide turbo assembly as far rearward as possible so that the front turbo edge is tight against the front mower deck edge. Secure the turbo with the hair pin clip (B, Figure 7).

4.Move the idler release lever (C) to release belt ten- sion.

5.Route the belt as shown in Figure 10. Make sure it is seated in all pulley grooves. The belt must be routed to the inside of the 2-1/4" capscrew as shown in Figure 10.

6.Close the belt cover (E. Figure 7) and tighten the knob into the pal nut.

7.Make sure that deflector rests on upstop (D, Figure 9) and does not contact the turbo housing. If deflector contacts housing, use washer(s) as shims under the upstop legs to increase clearance.

NOTE: After initial assembly, it is not necessary to remove mower deck when removing or installing turbo assembly.

WARNING

The deflector is spring loaded. when attaching or removing the blower, hold the deflector up; then allow the deflector to go down into the normal operating position.

D

E

C

A

B

Figure 7. Mount Turbo

 

A. Mounting Plate

D. Upstop

B. Hairpin Clip

E. Belt Cover

C. Idler Release Lever

 

REMOVING THE TURBO

NOTE: After initial assembly, it is not necessary to remove mower deck when removing or installing turbo assembly.

For operation without turbo, the deflector must be properly installed in the down position and retained by the spring latch.

1.Disconnect the discharge tubes.

2.Unscrew the belt cover knob (C, Figure 9) and open the cover.

3.Move the idler release lever (D, Figure 9) to release tension on the drive belt and remove the belt from the arbor pulley.

4.Remove the hairpin clip (B, Figure 9) and remove the turbo assembly.

Figure 8. Engage Stone Guard Hook

WARNING

To operate without the collection system, the blower assembly MUST be removed and the deflector MUST be in the down position.

The deflector is spring loaded. when attaching or removing the blower, hold the deflector up; then allow the deflector to go down into the normal operating position.

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents OPERATOR’S Manual Page Table of Contents Safety Decals Safety Rules InformationBefore Operation Recommended AccessoriesMowing with the Turbo Operating Without the TurboInitial Setup & Assembly Prepare the Deck, Belt Cover, & Support Arm AssemblyInstall Stacked Arbor Pulley Assemble & Install Deflector Initial Setup & AssemblyAssemble Turbo Bracket Hardware PlacementRemoving the Turbo Attaching the TurboPulley Adjustments AdjustmentsUpstop Adjustment StorageFront Bracket Hole Template Page Page Page

1726315-02, 1694496 specifications

Snapper 1694496,1726315-02 is an innovative product designed to meet the increasing demands of today's technology-driven landscape. This highly efficient device boasts a range of features and characteristics that make it a standout choice for various applications.

At the heart of the Snapper 1694496,1726315-02 is its advanced engineering, which is evident in its robust build quality and sleek design. This product is particularly known for its high performance, ensuring reliability under various operating conditions. The use of durable materials not only enhances the longevity of the device but also minimizes the need for frequent replacements.

One of the standout technologies integrated into the Snapper 1694496,1726315-02 is its state-of-the-art motor system. This motor is designed for optimal energy efficiency, allowing users to benefit from lower operational costs while maintaining high performance. The device operates quietly, making it suitable for noise-sensitive environments.

Another notable characteristic is its user-friendly interface. The Snapper 1694496,1726315-02 is equipped with intuitive controls that allow for easy navigation and operation. Users can quickly adjust settings to match specific requirements, making it accessible to both novice and experienced users alike.

The product also features advanced connectivity options, which enable seamless integration with smart technologies. This connectivity facilitates remote monitoring and control, enhancing usability and convenience. Users can easily access performance data and make adjustments through mobile applications or web interfaces.

Moreover, the Snapper 1694496,1726315-02 incorporates safety features that ensure secure operation. These features include overload protection and automatic shut-off mechanisms, which prevent potential damage to the device and promote user safety.

In addition to its impressive technical specifications, this device is also designed with sustainability in mind. Its energy-efficient operation aligns with modern environmental standards, making it an ideal choice for eco-conscious consumers and businesses.

In conclusion, the Snapper 1694496,1726315-02 embodies a blend of advanced features, innovative technologies, and user-centric design. Whether for personal use or in a professional setting, this product delivers exceptional performance and reliability, addressing the diverse needs of today's users. With its focus on efficiency, connectivity, and safety, it represents a valuable addition to any technology arsenal.
Top Page Image Contents