Snapper 1694496, 1726315-02 manual Safety Rules Information, Safety Decals

Page 4

Safety Rules

& Information

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. This mow-

ing deck is capable of amputating hands and feet and throwing objects. The triangle in text signi- fies important cautions or warnings which must be followed.

GENERAL WARNINGS

Know the tractor controls and how to stop quickly.

READ THE TRACTOR OPERATOR’S MANUAL.

Read and obey all safety decals.

Only allow responsible adults, who are familiar with the instructions, to operate the unit.

Disengage the electric clutch (PTO). Shut off the engine and wait for all moving parts to stop before attaching, adjusting, or disconnecting any part of the collection system.

Check the collection system to make sure it is bolted tightly to the tractor.

DO NOT operate the mower without either the entire grass catcher or the deflector in place.

Turn off the PTO switch to disengage the blades when not mowing.

DO NOT mow in reverse. Always look down and behind before and while travelling in reverse.

DO NOT turn sharply when travelling alongside a building or any object. Slow down before turning.

DO NOT carry passengers on the tractor.

When blower assembly is removed from the mower deck, the deflector must be properly installed.

If the mower stalls or the turbo blower chute plugs:

1.disengage the electric clutch (PTO);

2.stop the engine and remove the key;

3.set the parking brake, and wait for all moving parts to stop.

4.Remove the foreign object or clear the chute with a piece of wood before restarting the engine.

NEVER PLACE HANDS INTO BLOWER HOUS- ING TO CLEAR JAMMED OBJECT. BLOWER MAY ROTATE WHEN OBJECT IS REMOVED.

For added tractor stability and to prevent tipping or loss of control:

a. Use reduced speed on uneven ground and when turning corners.

b. Reduce loads on hillsides. It is recommended that the collection system be kept only half full when negotiating any slopes. Start mowing on slopes when the collection system is empty.

c. Mow up and down the face of slopes; never across the face of any slope.

When operating on slopes, use front counterweights. On slopes over 15% (8.5°), use two rear wheel weights in addition to front counterweight. Never operate on slopes greater than 30% (16.7°).

SAFETY DECALS

This unit has been designed and manufactured to pro- vide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing.

Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operate this equipment safely and effec- tively, we have placed several safety labels on the unit to remind you of this important information while you are operating your unit.

All DANGER, WARNING, CAUTION and instructional messages on your rider and mower should be carefully

These labels are easily applied and will act as a constant visual reminder to you, and others who may use the equipment, to follow the safety instructions necessary for safe, effective operation.

Read and obey all operation and warning decals.

Danger Decal - P/N 1704277

read and obeyed. Personal bodily injury can result when these instructions are not followed. The information is for your safety and it is important! The safety decals below are on your rider and mower.

If any of these decals are lost or damaged, replace them at once. See your local dealer for replacements.

DANGER

ROTATING

BLADES

SHUT OFF MOWER

AND TRACTOR

BEFORE SERVICING

OR CLEANING BLOWER

AND MOWER.

1700259

Danger Decal - P/N 1704276

WARNING

This shield must be in place at all times during operation.

Mower deflector must be in down position when blower is removed.

1717291

Warning Decal - P/N 1700259

2

Image 4
Contents OPERATOR’S Manual Page Table of Contents Safety Rules Information Safety DecalsRecommended Accessories Before OperationMowing with the Turbo Operating Without the TurboPrepare the Deck, Belt Cover, & Support Arm Assembly Initial Setup & AssemblyInstall Stacked Arbor Pulley Initial Setup & Assembly Assemble & Install DeflectorBracket Hardware Placement Assemble TurboAttaching the Turbo Removing the TurboAdjustments Pulley AdjustmentsUpstop Adjustment StorageFront Bracket Hole Template Page Page Page

1726315-02, 1694496 specifications

Snapper 1694496,1726315-02 is an innovative product designed to meet the increasing demands of today's technology-driven landscape. This highly efficient device boasts a range of features and characteristics that make it a standout choice for various applications.

At the heart of the Snapper 1694496,1726315-02 is its advanced engineering, which is evident in its robust build quality and sleek design. This product is particularly known for its high performance, ensuring reliability under various operating conditions. The use of durable materials not only enhances the longevity of the device but also minimizes the need for frequent replacements.

One of the standout technologies integrated into the Snapper 1694496,1726315-02 is its state-of-the-art motor system. This motor is designed for optimal energy efficiency, allowing users to benefit from lower operational costs while maintaining high performance. The device operates quietly, making it suitable for noise-sensitive environments.

Another notable characteristic is its user-friendly interface. The Snapper 1694496,1726315-02 is equipped with intuitive controls that allow for easy navigation and operation. Users can quickly adjust settings to match specific requirements, making it accessible to both novice and experienced users alike.

The product also features advanced connectivity options, which enable seamless integration with smart technologies. This connectivity facilitates remote monitoring and control, enhancing usability and convenience. Users can easily access performance data and make adjustments through mobile applications or web interfaces.

Moreover, the Snapper 1694496,1726315-02 incorporates safety features that ensure secure operation. These features include overload protection and automatic shut-off mechanisms, which prevent potential damage to the device and promote user safety.

In addition to its impressive technical specifications, this device is also designed with sustainability in mind. Its energy-efficient operation aligns with modern environmental standards, making it an ideal choice for eco-conscious consumers and businesses.

In conclusion, the Snapper 1694496,1726315-02 embodies a blend of advanced features, innovative technologies, and user-centric design. Whether for personal use or in a professional setting, this product delivers exceptional performance and reliability, addressing the diverse needs of today's users. With its focus on efficiency, connectivity, and safety, it represents a valuable addition to any technology arsenal.