Snapper 1694496 Initial Setup & Assembly, Prepare the Deck, Belt Cover, & Support Arm Assembly

Page 6

Initial

Setup & Assembly

C

B

A

Figure 1. Deflector, Stone Guard, and Cover

A. DeflectorC. Belt Cover

B. Stone Guard

INITIAL SETUP & ASSEMBLY

Prepare the Deck, Belt Cover, & Support Arm Assembly

1.Remove the mower deck from the tractor. Refer to he tractor operator’s manual for mower installation and removal procedures.

2.Remove the deflector (A, Figure 1) and correspond- ing mounting hardware from deck. Also Remove the left side belt cover (C). Clean all mounting holes.

3.Assemble the hinge (E) to the new belt cover (A) using hardware provided (D, F) as shown in Figure 2.

Insert the knob (B) through the cover (A) and secure with 5/16 push nut (G). Assemble the belt cover (A) and knob (B) to the left-hand mower cover (C).

Install Stacked Arbor Pulley

1.Roll the mower drive belt off the left arbor pulley.

2.Remove the left side arbor pulley by blocking the left- hand mower blade with a wood block and removing the arbor pulley capscrew. Discard the capscrew but retain the other hardware.

3.See Figure 5. Install the double stacked pulley (A) from turbo kit, with the larger pulley on the bottom. Use the longer capscrew (B) supplied with the kit along with the original hardware.

4.Block the mower blade with wood and tighten cap- screw to 50-70 ft. lbs. (68-76 Nm).

5.Re-install the mower drive belt on the lower pulley.

B

A

G

D

E

F

C

Figure 2. Assemble the New Cover

A. Belt Cover

E. Hinge

B. Knob

F. Screw, #10-32 x 3/8

C. Left Hand Cover

G. 5/16 Push nut

D. Locknut, #10-32

 

 

 

 

 

Figure 3. Install Stacked Arbor Pulley

A.

Pulley Assy.

C. Lockwasher

B.

Capscrew, 7/16 x 2-1/4

D. Washer

4

Page 5 Page 7
Image 6
Page 5 Page 7
Contents OPERATOR’S Manual Page Table of Contents Safety Rules Information Safety DecalsMowing with the Turbo Recommended AccessoriesBefore Operation Operating Without the TurboInitial Setup & Assembly Prepare the Deck, Belt Cover, & Support Arm AssemblyInstall Stacked Arbor Pulley Initial Setup & Assembly Assemble & Install DeflectorBracket Hardware Placement Assemble TurboAttaching the Turbo Removing the TurboUpstop Adjustment AdjustmentsPulley Adjustments StorageFront Bracket Hole Template Page Page Page

1726315-02, 1694496 specifications

Snapper 1694496,1726315-02 is an innovative product designed to meet the increasing demands of today's technology-driven landscape. This highly efficient device boasts a range of features and characteristics that make it a standout choice for various applications.

At the heart of the Snapper 1694496,1726315-02 is its advanced engineering, which is evident in its robust build quality and sleek design. This product is particularly known for its high performance, ensuring reliability under various operating conditions. The use of durable materials not only enhances the longevity of the device but also minimizes the need for frequent replacements.

One of the standout technologies integrated into the Snapper 1694496,1726315-02 is its state-of-the-art motor system. This motor is designed for optimal energy efficiency, allowing users to benefit from lower operational costs while maintaining high performance. The device operates quietly, making it suitable for noise-sensitive environments.

Another notable characteristic is its user-friendly interface. The Snapper 1694496,1726315-02 is equipped with intuitive controls that allow for easy navigation and operation. Users can quickly adjust settings to match specific requirements, making it accessible to both novice and experienced users alike.

The product also features advanced connectivity options, which enable seamless integration with smart technologies. This connectivity facilitates remote monitoring and control, enhancing usability and convenience. Users can easily access performance data and make adjustments through mobile applications or web interfaces.

Moreover, the Snapper 1694496,1726315-02 incorporates safety features that ensure secure operation. These features include overload protection and automatic shut-off mechanisms, which prevent potential damage to the device and promote user safety.

In addition to its impressive technical specifications, this device is also designed with sustainability in mind. Its energy-efficient operation aligns with modern environmental standards, making it an ideal choice for eco-conscious consumers and businesses.

In conclusion, the Snapper 1694496,1726315-02 embodies a blend of advanced features, innovative technologies, and user-centric design. Whether for personal use or in a professional setting, this product delivers exceptional performance and reliability, addressing the diverse needs of today's users. With its focus on efficiency, connectivity, and safety, it represents a valuable addition to any technology arsenal.
Top Page Image Contents