Snapper 1694496, 1726315-02 manual Storage, Pulley Adjustments, Upstop Adjustment

Page 10

Attaching & Removing the Turbo

ADJUSTMENTS

Pulley Adjustments

If the mower deck belt has stretched over time, the stacked idler pulley (B, Figure 10) may need to be moved to the outer hole in the mower deck to take up the belt slack.

If the mower idler pulley (B) is mounted in the outer hole in the deck, then the turbo idler pulley (C) should be as far toward the front as the slot will allow. If the stacked idler pulley (B) is mounted in the inner hole, then the turbo idler pulley (C) should remain as installed at factory.

To adjust:

1.Loosen the back-side idler pulley (C, Figure 10) hard- ware.

2.Move the idler pulley forward in the adjustment slot and then re-tighten the hardware.

F

E

 

 

D

 

A

C

B

Figure 9. Mount/Remove Turbo

A. Mounting Plate

D. Idler Release Lever

B. Hairpin Clip

E. Upstop

C. Belt Cover Knob

F. Deflector

Upstop Adjustment

The upstop (E, Figure 9) prevents the deflector (F) from contacting the top of the turbo. If the upstop is not pro- viding sufficient clearance, shim the upstop with washers until the deflector does not contact the turbo.

STORAGE

Remove any debris from the turbo blower housing. If you clean the housing, use a mild detergent only (other prod- ucts may damage tube). If paint has been scratched on metal parts, touch up with paint, or apply a thin film of oil.

To prevent corrosion, store in a dry area, away from moisture.

B

A

F

C

Adjustment Slot

D

E

FRONT

Figure 10. Turbo Belt Routing

A.Belt

B.Stacked Idler Pulley

C.Back-side Idler Pulley

D.Turbo Drive Pulley

E.Spring Loaded Idler

F.Capscrew, 1/4-20 x 2-1/4

8

Page 9 Page 11
Image 10
Page 9 Page 11
Contents OPERATOR’S Manual Page Table of Contents Safety Rules Information Safety DecalsMowing with the Turbo Recommended AccessoriesBefore Operation Operating Without the TurboPrepare the Deck, Belt Cover, & Support Arm Assembly Initial Setup & AssemblyInstall Stacked Arbor Pulley Initial Setup & Assembly Assemble & Install DeflectorBracket Hardware Placement Assemble TurboAttaching the Turbo Removing the TurboUpstop Adjustment AdjustmentsPulley Adjustments StorageFront Bracket Hole Template Page Page Page

1726315-02, 1694496 specifications

Snapper 1694496,1726315-02 is an innovative product designed to meet the increasing demands of today's technology-driven landscape. This highly efficient device boasts a range of features and characteristics that make it a standout choice for various applications.

At the heart of the Snapper 1694496,1726315-02 is its advanced engineering, which is evident in its robust build quality and sleek design. This product is particularly known for its high performance, ensuring reliability under various operating conditions. The use of durable materials not only enhances the longevity of the device but also minimizes the need for frequent replacements.

One of the standout technologies integrated into the Snapper 1694496,1726315-02 is its state-of-the-art motor system. This motor is designed for optimal energy efficiency, allowing users to benefit from lower operational costs while maintaining high performance. The device operates quietly, making it suitable for noise-sensitive environments.

Another notable characteristic is its user-friendly interface. The Snapper 1694496,1726315-02 is equipped with intuitive controls that allow for easy navigation and operation. Users can quickly adjust settings to match specific requirements, making it accessible to both novice and experienced users alike.

The product also features advanced connectivity options, which enable seamless integration with smart technologies. This connectivity facilitates remote monitoring and control, enhancing usability and convenience. Users can easily access performance data and make adjustments through mobile applications or web interfaces.

Moreover, the Snapper 1694496,1726315-02 incorporates safety features that ensure secure operation. These features include overload protection and automatic shut-off mechanisms, which prevent potential damage to the device and promote user safety.

In addition to its impressive technical specifications, this device is also designed with sustainability in mind. Its energy-efficient operation aligns with modern environmental standards, making it an ideal choice for eco-conscious consumers and businesses.

In conclusion, the Snapper 1694496,1726315-02 embodies a blend of advanced features, innovative technologies, and user-centric design. Whether for personal use or in a professional setting, this product delivers exceptional performance and reliability, addressing the diverse needs of today's users. With its focus on efficiency, connectivity, and safety, it represents a valuable addition to any technology arsenal.
Top Page Image Contents