Smith Cast Iron Boilers GS110W operation manual Instructions to the Installer

Page 27

GS110 DIRECT VENT BOILER INSTALLATION AND OPERATION INSTRUCTIONS

Page 27

INSTRUCTIONS TO THE INSTALLER

The INSTALLER must give this copy of the INSTAL- LATION AND OPERATING INSTRUCTIONS to the boiler owner and make sure that the owner or operator has a basic understanding of the following:

1.The operating instructions, the type of ignition system installed and how it operates.

2.What the labels on the boiler say.

3.How to start up and shut off the boiler.

4.How to turn the gas and electrical power on or off.

5.What to do if the boiler ignition system locks out.

6.Where to check the system temperature and pressure and what they should be.

7.The importance of reading, understanding and following these instructions.

8.The importance of visually inspecting the vent system on a monthly basis.

The INSTALLER MUST make sure that the owner knows to shut the boiler off and call for service if the following conditions occur:

1.Yellow lazy flames or flames outside the jacket.

2.Gas smell or other strange odors.

3.Discoloration of the boiler or surrounding materials.

4.Water leaking from the heating system piping or relief valve.

5.Flue products leaking from the vent system into the living space. Dampness or condensation in the building is a good indicator of this condition.

6.The boiler's flame rollout safety system is actuated.

7.Control malfunction or sporadic operation.

Any appliance that burns natural gas, propane gas, fuel oil, wood or coal is capable of producing carbon monoxide (CO). Carbon Monoxide (CO) is a gas, which is odorless, colorless and tasteless but is very toxic. If your Smith boiler is not working properly, or is not vented properly, dangerous levels of CO may accumulate. CO is lighter than air and thus may travel throughout the building.

BRIEF EXPOSURE TO HIGH CONCENTRATIONS OF CO, OR PROLONGED EXPOSURE TO LESSER AMOUNTS OF CO MAY RESULT IN CARBON MON- OXIDE POISONING! EXPOSURE CAN BE FATAL AND EXPOSURE TO HIGH CONCENTRATIONS MAY RESULT IN THE SUDDEN ONSET OF SYMPTOMS INCLUDING UNCONSCIOUSNESS.

Symptoms of CO poisoning include the following: Dizziness, vision problems, shortness of breath, headaches, loss of muscle control, unclear thinking, nausea, weakness and unconsciousness.

The symptoms of CO poisoning are often confused with those of influenza, and the highest incidence of poisoning occurs at the onset of cold weather or during flu season. A victim may not experience any symptoms, only one symptom, or a few symptoms. Suspect the presence of carbon monoxide if symptoms tend to disappear when you leave your home.

The following signs may indicate the presence of carbon monoxide:

•Hot gases from appliance, venting system, pipes or chimney, escaping into the living space.

•Flames coming out around the appliance.

•Yellow colored flames in the appliance.

•Stale or smelly air.

•The presence of soot or carbon in or around the appliance.

•Very high unexplained humidity inside the building.

If any of the symptoms of CO poisoning occur, or if any of the signs of carbon monoxide are present, VACATE

THE PREMISES IMMEDIATELY AND CONTACT A QUALIFIED HEATING SERVICE COMPANY OR THE GAS COMPANY OR THE FIRE DEPARTMENT!

WARNING: Improper installation, adjustment, alteration, service or maintenance can cause property damage, personal injury exposure to hazardous materials or loss of life. Installation and service must be performed by a qualified installer, service agency or the gas supplier who must read and follow the supplied instructions before installing, servicing or removing this boiler. This boiler contains crystalline silica materials that have been identified as carcinogenic or possibly carcinogenic to humans when inhaled.

AVERTISSEMENT: Une installation, un réglage, une modification, une réparation ou un entretien non comforme aux normes peut entraîner des dommages matériels, des blessures exposition

àdes matières dangereuses ou la mort. L'installation et l'entretien doivent être effectués par un installateur ou un service d'entretien qualifié ou le fournisseur de gaz qui doivent avoir lu les instructions fournies avant de faire l'installation, l'entretien ou l'enlèvement de la chaudière et les respecter, Cette chaudière contient des matériaux qui ont été identifiés comme étant cancérogènes ou pouvant l' être.

Page 26 Page 28
Image 27
Page 26 Page 28
Contents GS110W Before YOU Start ContentsBoiler Location Boiler Ratings & CapacitiesAll Combustion Air From Inside The Building Combustion AIR & VentilationDuct Size Combustion Air Duct SizingNumber Combustion Air System SizingIntake Air Optional Horizontal Guidelines Intake Air Option Vertical GuidelinesSmith Page Horizontal Direct Vent Systems General Venting GuidelinesGeneral Direct Vent Info Vent System OptionsCertified Vent Terminals Vertical Direct Vent SystemsHorizontal Vent Positive Pressure Systems Certified Vent & Intake TerminalsEquivalent Breeching & Chimney Size Vertical Vent Positive Pressure SystemsVertical Vent Negative Pressure Systems Chimney Inspection & SizingVertical Positive Pressure Venting Cat Common Vent Systems Boiler Water Volume Condensate PipingHeating System Piping Bypass Piping System BypassPump Away Bypass Circulators Piping For Use With Cooling UnitsGas Pipe Capacity Equivalent Pipe Length ChartWhen servicing controls. Wiring errors can cause GAS Supply PipingThermostat Installation Operational SequenceControl Outputs Wiring Connection Diagram Wiring Ladder Diagram For Your Safety Read Before Operating Pour Votre Sécurité Lisez Avant DE Mettre EN Marche Boiler SET UP Boiler OperationDirect Ignition System Air and Manifold Pressure Boiler Checking & AdjustmentBoiler Maintenance Instructions to the Installer Page Model Size with Item Quantities Below Ref # Name of Part Service and Replacement Parts ListModel Size with Item Quantities Below Page North ELM Street WESTFIELD, MA 01085 TEL 562-9631 FAX 413

GS110W specifications

The Smith Cast Iron Boilers GS110W stands as a premier choice for those seeking efficiency and reliability in heating systems. Known for their robust construction and advanced engineering, Smith Boilers are designed to meet the needs of both residential and commercial applications. The GS110W model showcases an impressive blend of performance and durability, making it a favorite among HVAC professionals and end users alike.

One of the main features of the GS110W is its cast iron construction. Cast iron is celebrated for its ability to retain heat, allowing the boiler to operate efficiently while providing consistent warmth over extended periods. This material also contributes to the boiler's longevity, allowing it to withstand the rigors of heating without significant wear and tear. The GS110W is designed to last, making it a wise investment for any heating needs.

The GS110W boasts an output capacity of 110,000 BTU/hour, making it suitable for a variety of heating applications. This output enables it to efficiently heat large spaces, whether in a multi-story building or a spacious home. The boiler’s efficiency rating is further enhanced by its ability to use multi-fuel options. It can efficiently burn oil or gas, providing flexibility depending on the availability and cost of fuel.

In terms of technology, the GS110W incorporates advanced boiler design that includes a submerged combustion chamber. This engineering feature allows for superior heat transfer while minimizing heat loss, ensuring that the maximum amount of energy is utilized for heating. Additionally, the boiler features a low water cutoff to enhance safety, preventing potential overheating and system failures.

Reliability is further ensured through the GS110W’s built-in controls and adjustments. The boiler is equipped with a digital aquastat that allows for precise temperature management, ensuring optimal performance. This user-friendly feature makes it easier for homeowners and technicians to monitor system conditions and make necessary adjustments for peak efficiency.

Another noteworthy characteristic of the Smith Cast Iron Boilers GS110W is its low emissions output. As environmental considerations become increasingly important, the GS110W is designed to minimize its environmental impact while still delivering powerful heating capabilities.

In conclusion, the Smith Cast Iron Boilers GS110W offers an outstanding combination of durability, efficiency, and advanced technology. Its robust cast iron construction, multi-fuel capability, and innovative design features make it a top choice for anyone looking to enhance their heating system. For those in search of reliable and efficient heating solutions, the GS110W stands out as a formidable contender.
Top Page Image Contents