Ruud AP14236 installation instructions Before You Call For Service…

Page 30

Before You Call For Service…

Troubleshooting Tips

Save time and money! Review the charts on the following pages first and you may not need to call for service.

This water heater incorporates a combustion shut off device that shuts the operation of the water heater down if undesirable combustion conditions occur, such as the presence of flammable vapors or blockage of the combustion air inlet openings. Please contact a Qualified Service Technician if this occurs.

 

Problem

Possible Causes

What To Do

 

 

 

 

Condensation

This usually happens when

 

a new water heater is

 

filled for the first time.

This is normal. After the water in the tank warms up, the condensation will disappear. If, however, the condition persists, examine the piping and fittings for possible leaks.

Moisture from the products of combustion condensing on the tank surface.

This is normal and will disappear in time. Excessive condensation can cause main burner outage.

An undersized water

Use a water heater size that meets the requirements

heater will cause

of your needs.

condensation.

 

Yellow flame or soot

Scale on top of the burner.

Contact a qualified service technician to remove scale.

 

 

Flue or Combustion air inlet

Remove obstruction or debris from flue or

openings are restricted.

combustion air inlet openings on water heater jacket.

 

 

Not enough combustion or

Proper operation of the water heater requires air for

ventilation air supplied to

combustion and ventilation. See the Combustion and

the water heater location.

Ventilation Air information in the “Installing The

 

Water Heater” section of this manual.

Unable to light

Air in gas line.

Contact a qualified service technician to purge the air

the main burner

 

 

from the gas line.

 

 

 

 

 

Gas Cock Knob not

Contact a qualified service technician to correctly position

 

correctly positioned.

the gas cock knob.

 

 

 

 

Blocked Exhaust

Contact a qualified service technician to evaluate vent

 

 

 

pipe for blockage.

 

 

 

 

 

Pressure Switch

Make sure the pressure switch hose is not "kinked".

 

 

 

 

Wire Connection not fully

Contact a qualified service technician to confirm wire

 

secured.

connections.

 

 

 

 

Combustion Shut-off Device

Combustion shut-off device should be inspected by a

 

tripped,

qualified service technician.

 

 

 

 

Gas Control Problem

Contact a qualified service technician.

 

 

 

Main burner does not

Gas Controls (Thermostat’s)

The gas control (thermostat) should be replaced by a

stay lit

single use gas shut-off device

qualified service technician.

 

has opened.

 

 

 

 

 

Combustion Shutoff Device

The combustion shutoff device should be inspected

 

Tripped.

by a qualified service technician.

CAUTION: For your safety DO NOT attempt repair of gas piping, gas control (thermostat), burners, vent connectors or other safety devices. Refer repairs to qualified service personnel.

30

Image 30
Contents Water Heaters ReferenceFor Your Records R N I N G Water increases Potential for Hot WaterPage For Installations in the State of California Installing the water heater LocationInspect Shipment Combustion and Ventilation AirCorrosive Atmospheres Typical Installation Thermal ExpansionWater Supply Connections Relief Valve To Fill the Water HeaterCondensation Gas Supply Leak TestingPressure Testing the Gas Supply System High AltitudeBlower Assembly Installation VentingMaximum Maximum Venting information for 2 VentsMaximum Venting information for 3 Vents Altitude for ModelsMaximum Venting information for 4 Vents Models Altitude for42VP60F 700’ 42VP60PF Horizontal Vent Terminal Location Additional ConsiderationsHorizontal Vent Installation Vertical Vent InstallationVertical Vent Termination Location Cleaner-Primer and Medium Body Solvent Cement Cementing JointsWiring Connection DiagramHot and Cold Pipe Insulation Installation Insulation BlanketsDilution Air Holes During Installation of this water heater Heat TrapInstallation Checklist Water Heater LocationWater Supply Combination Potable Water and Space Heating Application House Hot water Supply to From HOT Heating Outlet on UnitFor Your Safety Read Before Operating Lighting the water heaterOperating Procedure Water Temperature SettingOperating the water heater Water Temperature Setting… Sequence of Operation… Routine Preventative Maintenance Draining the Water HeaterHousekeeping Venting System InspectionBurner Inspection Vacation and Extended Shut-Down Anode RodBefore You Call For Service… Producing popping Rumbling noiseRelief valve Noise or drainingGas Valve LED Codes Replacement Parts Use only original equipment replacement partsInstructions For Placing a Parts Order Page Page If YOU Need Service

AP14236 specifications

Ruud AP14236 is a highly efficient air conditioning unit that stands out in the residential HVAC market for its remarkable performance and innovative technology. This model is specifically engineered to provide optimal cooling and heating solutions, offering homeowners comfort year-round while also emphasizing energy efficiency.

One of the key features of the Ruud AP14236 is its efficiency rating, showcased by its SEER (Seasonal Energy Efficiency Ratio) rating, which provides users with an indication of energy consumption versus cooling output. With ratings often exceeding 14, the unit is designed to reduce energy bills significantly while maintaining a comfortable indoor environment. In addition to SEER, the unit boasts an HSPF (Heating Season Performance Factor) that guarantees excellent performance during colder months.

The Ruud AP14236 utilizes advanced inverter technology that allows for variable speed operation. This technology enables the air conditioner to adjust its cooling output based on the actual temperature in the home, leading to lower energy consumption while ensuring that the desired climate is reached swiftly and efficiently. This feature not only enhances comfort but also prolongs the lifespan of the unit, as it does not require the constant on-off cycling seen in traditional systems.

Equipped with an enhanced filtration system, the Ruud AP14236 significantly improves indoor air quality by capturing dust, allergens, and other particulates. This characteristic is particularly advantageous for those with allergies or respiratory conditions, as it creates a healthier living environment.

Durability is another hallmark of the Ruud AP14236, featuring robust construction materials designed to withstand the rigors of varied weather conditions. The unit's cabinet is often galvanized and treated to resist rust, ensuring longevity and reducing maintenance issues.

Noise reduction is also a primary focus in the design of Ruud AP14236. The unit operates quietly, allowing for comfortable living spaces without the disruptive sounds commonly associated with air conditioning systems. This is achieved through sound-dampening technology and acoustic insulation.

In summary, the Ruud AP14236 is engineered for energy efficiency, versatility, durability, and quiet operation. Homeowners seeking a reliable and efficient air conditioning solution will find that this unit meets their needs while providing year-round comfort and improved air quality.