Windsor SCC326 10052260, SC326 10052220 Normal Scrubbing, To Begin Scrubbing, To Stop Scrubbing

Page 17

NORMAL SCRUBBING

Plan the scrubbing pattern in advance. The longest track is around the perimeter of the area to be cleaned. For efficient operation, the runs should be the longest possible without turning, stopping, or raising and lowering scrub deck/squeegee.

NOTE: In order to achieve the best possible results, the area which is to be cleaned should be

swept before scrubbing. Large debris, strings & wire must be removed to prevent being caught in brushes or squeegee.

MACHINE OPERATION

TO BEGIN SCRUBBING

!

When operating the machine around people, pay close attention for unexpected movement. Use extra caution around children.

!

Flammable liquids and/or reactive metals can cause explosions or fire! Do not pick up.

1.Turn the machine power on.

2.Lower the squeegee.

3.Turn the vacuum on.

4.Lower the scrub brushes to the floor.

5.Turn the scrub brushes on (brushes will start when machine is propelled).

6.Drive machine forward to begin scrubbing. NOTE: Shut machine off immediately if water or foam is expelled from the machine.

7.Adjust the speed of the machine, solution flow and scrub brush pressure as necessary.

NOTE: Once solution flow rate is set it is not necessary to shut off solution when stopping scrubbing. Solution flow is automatically shut off when brush motors stop. When brush motors are activated, flow automatically resumes.

TO STOP SCRUBBING

1.Release the propel levers.

2.Turn the scrub brushes off.

3.Raise the scrub brushes.

4.Raise the squeegee.

5.Turn the vacuum off.

6.Turn the machine power off.

CUTTER 36V 86039090 04/03/07

3-10

 

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Walk Behind Scrubber Overview Machine Data LOG/OVERVIEWYour Dealer Table of Contents Model HOW to USE this ManualRead ALL Instructions Before Using this Machine Important Safety InstructionsHazard Intensity Level Hazard Intensity LevelSafety Label Location DIMENSION/CAPACITY Technical SpecificationsMeasure Special NotesHOW the Machine Works Components Controls Brush Switch KEY SwitchEmergency SHUT-OFF Switch Optional Vacuum Switch Solution Control KnobSqueegee Pitch Adjustment Knob Squeegee Deflection Adjustment KnobsHour Meter Optional Parking Brake OptionalFilling Solution Tank Emergency Stop ProceduresMachine Operation PRE-RUN Machine InspectionTo Stop Scrubbing Normal ScrubbingTo Begin Scrubbing Double Scrub Emptying and Cleaning TanksHRS Maintenance Service ScheduleMaintenance Daily Weekly Monthly Maintenance Batteries Battery MaintenanceChecking Gravity Checking Battery Specific Gravity To Charge the BatteriesBattery Condition Front of Machine Changing BatteriesTo Remove Squeegee Assembly Adjusting SqueegeeSqueegee Blades To Replace or Rotate Rear Squeegee BladesTo Replace AQUA-MIZER Squeegee Blades To Adjust Squeegee PitchTo Adjust Amount of Rear Squeegee Deflection Recovery Tank Float SHUT-OFF Replacing or Installing Scrub BrushesScrub Brushes Uncoated FloorsBrush Motor Carbon Brush Replacement Solution StrainerBrush Motor Changing Brush MotorsTraction Motor Traction Motor Carbon Brush ReplacementCircuit Breakers Brush Shrouds & Brush SkirtsChanging Vacuum Motor Vacuum MotorProblem Cause Solution Machine TroubleshootingMachine Troubleshooting

SC326 10052220, SCC326 10052260 specifications

The Windsor SCC326 and SC326 series represent innovative advancements in industrial cleaning equipment, designed to enhance efficiency and productivity in various environments. Specifically tailored for heavy-duty cleaning applications, these floor scrubbers combine powerful performance with user-centric features.

The SCC326 model boasts a robust design that is perfect for large commercial spaces like warehouses, airports, and shopping centers. Equipped with a high-capacity solution tank, the SCC326 enables prolonged cleaning sessions without frequent refills, minimizing downtime. The brush system utilizes dual rotating brushes to effectively agitate dirt and grime from surfaces, while the innovative scrub deck design allows for superior maneuverability in tight areas.

On the other hand, the SC326 model shares many of these characteristics but places an added emphasis on eco-friendly operation. With a focus on sustainability, the SC326 incorporates a smart scrub feature that optimizes water and chemical usage, ensuring that cleaning solutions are applied precisely where needed. This not only reduces environmental impact but also lowers operational costs over time.

Both models utilize advanced technology in their respective operations. They come equipped with an onboard diagnostic system, providing real-time feedback on performance and maintenance needs. This feature assists operators in staying informed about the machine's condition and significantly enhances reliability.

Ergonomically designed controls on both models ensure that users can operate them with minimal strain, promoting comfort during extended use. Additionally, their compact design allows for easy storage and transport, making them an excellent choice for businesses with diverse cleaning needs.

In terms of safety, both SCC326 and SC326 are fitted with automatic shut-off systems that activate in case of emergencies, thereby protecting users and equipment alike. This attention to safety standards reflects Windsor's commitment to providing top-tier cleaning solutions.

Ultimately, the Windsor SCC326 and SC326 series embody a blend of power, efficiency, and safety, catering to the rigorous demands of industrial cleaning tasks. Whether addressing large-scale surface areas or caring for intricate spaces, these models are engineered to deliver superior performance without compromising ease of use or environmental responsibility.
Top Page Image Contents