To Adjust Squeegee Pitch

1.Choose a smooth, level surface. Turn “ON” the key switch. Lower the squeegee and drive forward at least 2 feet (60cm.).

2.With the squeegee down, stop the machine. Do not allow machine to roll back.

FOR SAFETY: Before leaving or servicing the machine; stop on level surface, turn off machine and remove key.

3.Determine the differences, if any, in deflection of the squeegee blade between each end and the middle. Proper adjustment is obtained when deflection is equal all the way across the squeegee blade. The bubble level should also indicate when the squeegee is adjusted properly. When the air bubble is in the center of the vial, the deflection should be even across the squeegee blade.

4.To decrease the deflection of the squeegee blade at the ends, tighten knob near the squeegee center. To increase the deflection at the ends of the squeegee assembly, loosen knob.

5.Check the deflection of the squeegee blades again. Repeat steps 1 through 4 until the deflection is equal across the entire rear squeegee blade.

3/8”

PROPER DEFLECTION OF SQUEEGEE BLADE

MAINTENANCE

TO ADJUST AMOUNT OF REAR SQUEEGEE DEFLECTION

1.Choose a smooth, level surface. Lower the squeegee and drive forward at least 2 feet (60cm).

2.With the squeegee down, stop the machine. Do not allow machine to roll back.

FOR SAFETY: Before leaving or servicing machine; stop on level surface, turn off machine and remove key.

3.Observe the amount of squeegee deflection. It should deflect 3/8 in. (9.5mm) across the entire width of the squeegee.

4.To increase the squeegee deflection, turn the 2 knobs at the squeegee ends counter-clockwise. To decrease the deflection, turn the knobs clockwise.

NOTE: The deflection should be consistent along the length of the squeegee. If the deflection varies from end to end the knobs can be adjusted independently to correct the variation.

5.Turn on the key switch. Raise, then lower squeegee assembly. Drive forward at least 2 feet (60cm).

6.Repeat steps 2 through 4 until deflection of 3/8 in. (9.5mm) is reached.

3.TO REPLACE AQUA-MIZER SQUEEGEE BLADES

These squeegee blades have two wear edges. To use the second edge:

1.Remove deck shrouds.

2.Remove brushes or pad drivers.

3.Remove each of the Aqua-Mizer squeegee systems.

4.Remove the hardware from each system that retains the blade.

5.Flip the blades and replace hardware.

6.Re-install each Aqua-Mizer system, brushes or pad drivers and shrouds.

CUTTER 36V 86039090 04/03/07	4-7

SC326 10052220, SCC326 10052260 specifications

The Windsor SCC326 and SC326 series represent innovative advancements in industrial cleaning equipment, designed to enhance efficiency and productivity in various environments. Specifically tailored for heavy-duty cleaning applications, these floor scrubbers combine powerful performance with user-centric features.

The SCC326 model boasts a robust design that is perfect for large commercial spaces like warehouses, airports, and shopping centers. Equipped with a high-capacity solution tank, the SCC326 enables prolonged cleaning sessions without frequent refills, minimizing downtime. The brush system utilizes dual rotating brushes to effectively agitate dirt and grime from surfaces, while the innovative scrub deck design allows for superior maneuverability in tight areas.

On the other hand, the SC326 model shares many of these characteristics but places an added emphasis on eco-friendly operation. With a focus on sustainability, the SC326 incorporates a smart scrub feature that optimizes water and chemical usage, ensuring that cleaning solutions are applied precisely where needed. This not only reduces environmental impact but also lowers operational costs over time.

Both models utilize advanced technology in their respective operations. They come equipped with an onboard diagnostic system, providing real-time feedback on performance and maintenance needs. This feature assists operators in staying informed about the machine's condition and significantly enhances reliability.

Ergonomically designed controls on both models ensure that users can operate them with minimal strain, promoting comfort during extended use. Additionally, their compact design allows for easy storage and transport, making them an excellent choice for businesses with diverse cleaning needs.

In terms of safety, both SCC326 and SC326 are fitted with automatic shut-off systems that activate in case of emergencies, thereby protecting users and equipment alike. This attention to safety standards reflects Windsor's commitment to providing top-tier cleaning solutions.

Ultimately, the Windsor SCC326 and SC326 series embody a blend of power, efficiency, and safety, catering to the rigorous demands of industrial cleaning tasks. Whether addressing large-scale surface areas or caring for intricate spaces, these models are engineered to deliver superior performance without compromising ease of use or environmental responsibility.