Windsor SCC326 10052260, SC326 10052220 manual Special Notes, Measure

Page 9

TECHNICAL SPECIFICATIONS

ITEM

Height

Length with 32 in. (81 cm) scrub head

Width without squeegee and scrub head

Width of squeegee for 32 in. (81 cm) scrub head

Width of scrub path for 32 in. (81 cm) scrub head

MEASURE

46 in (117 cm)

71 in (180)

28 in (71 cm)

39 in (99 cm)

32 in (81 cm)

LENGTH

WIDTH

HEIGHT

SPECIAL NOTES:

The sound pressure level at the operator’s ear was measured to be 75 dBA. This was

anearfield, broad-band measurement taken in a typical industrial environment on a tile floor. This appliance contains no possible source of impact noise. The instantaneous sound pressure level is below 63 Pa.

The weighted root mean square acceleration at the operator’s arms was measured to be below 2.5m/s2 . This was a tri-axial, third-octave-band measurement made during normal operation on a composite tile floor. The measurement and related calculations were made in accordance with ANSI S3.34-1986.

CUTTER 36V 86039090 04/03/07

3-2

Image 9
Contents Walk Behind Scrubber Machine Data LOG/OVERVIEW Your DealerOverview Table of Contents Model HOW to USE this ManualRead ALL Instructions Before Using this Machine Important Safety Instructions Hazard Intensity Level Hazard Intensity LevelSafety Label Location DIMENSION/CAPACITY Technical SpecificationsMeasure Special NotesHOW the Machine Works Components Controls KEY Switch Emergency SHUT-OFF Switch OptionalBrush Switch Vacuum Switch Solution Control KnobSqueegee Pitch Adjustment Knob Squeegee Deflection Adjustment KnobsHour Meter Optional Parking Brake OptionalFilling Solution Tank Emergency Stop ProceduresMachine Operation PRE-RUN Machine InspectionNormal Scrubbing To Begin ScrubbingTo Stop Scrubbing Double Scrub Emptying and Cleaning TanksMaintenance Service Schedule Maintenance Daily Weekly MonthlyHRS Maintenance Batteries Battery MaintenanceChecking Battery Specific Gravity To Charge the Batteries Battery ConditionChecking Gravity Front of Machine Changing BatteriesTo Remove Squeegee Assembly Adjusting SqueegeeSqueegee Blades To Replace or Rotate Rear Squeegee BladesTo Adjust Squeegee Pitch To Adjust Amount of Rear Squeegee DeflectionTo Replace AQUA-MIZER Squeegee Blades Recovery Tank Float SHUT-OFF Replacing or Installing Scrub BrushesScrub Brushes Uncoated FloorsBrush Motor Carbon Brush Replacement Solution StrainerBrush Motor Changing Brush MotorsTraction Motor Traction Motor Carbon Brush ReplacementCircuit Breakers Brush Shrouds & Brush SkirtsChanging Vacuum Motor Vacuum MotorProblem Cause Solution Machine TroubleshootingMachine Troubleshooting