Windsor Saber Blade 12 manual Faults, Maintenance schedule, Maintenance Works, Frost protection

Page 10

Maintenance schedule

After the work

￿Warning

Risk of damage. Do not wash down the appliance with water and do not use ag- gressive detergents.

ÎEmpty the recovery tank.

ÎClean the seals between the recov- ery tank and the appliance.

ÎEmpty the solution tank.

ÎRinse the appliance: Fill the solution tank with water (without detergent) and let the appliance run for one minute with the brush water supply turned on.

ÎEmpty the solution tank.

ÎClean the outside of the appliance with a damp cloth which has been soaked in mild detergent.

ÎClean the squeegee, check for wear and replace if required (see "Mainte- nance tasks").

ÎCheck the brush for wear and re- place if required (see "Maintenance tasks").

Yearly

ÎHave the prescribed safety inspec- tion carried out by an electrician.

Maintenance Works

Replace the squeegee.

Note

The squeegee is attached to the appli- ance with snaps and can simply be pulled off.

ÎMove the squeegee lift pedal to posi- tion „suction off“ (Fig. 3 - position "1/ ON", see inside front cover).

ÎRemove the solution tank from the appliance.

ÎRemove the recovery tank.

10English

ÎLay the device down on the back- side.

ÎPull off the squeegee downwards.

ÎInsert the new squeegee and lock them into place.

Replacing the brush

ÎRemove the solution tank from the appliance.

ÎRemove the recovery tank.

ÎLay the device down on the back- side.

ÎPress the release button for the brush and swivel the brush toward the bottom and pull it off the driver.

ÎPlace the new brush on the driver and lock into place on the opposite side.

Frost protection

In case of danger of frost:

ÎEmpty the solution and recovery tank.

ÎStore the appliance in a frost-pro- tected room.

Faults

￿Danger

First pull out the plug from the mains be- fore carrying out any tasks on the ma- chine.

￿Warning

Risk of damage to the appliance on ac- count of water leakage. Empty the waste water reservoir and the fresh wa- ter reservoir prior to performing mainte- nance on the appliance.

In case of faults that cannot be reme- died using the table below please con- tact the customer service.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Saber Blade Page Grounding Instructions To Reduce the Risk of ELEC- Tric SHOCK-USE Indoors onlyOperator Responsibility Operating Safety Rules PracticesConnect to a Properly Grounded Outlet only GeneralFire Safety Standard Maintenance and RE Build PracticesOperator care of the unit Function SymbolsProper use Control elements Environmental protectionInitial startup Complete cleaning Fill solution tankCleaning OperationEmptying the solution tank Maintenance and careEmptying the recovery tank TransportMaintenance Works FaultsMaintenance schedule Frost protectionError Remedy Clean suction tube Technical specificationsClean water distributor Spare partsConserver CES Instruc Tions Regles ET Pratiques DE Securite DE FONCTION- Nement Instructions Visant LA Mise À LA TerreNE Brancher QUÀ UNE Prise DE Courant Avec Mise À LA Terre Responsabilité de lopérateurGénéralités DéplacementsPratiques Dentretien ET DE Reconstruction Entretien de lunité par lopéra TeurTable des matières Norme DE Securite CendieConsignes de sécurité Fonction SymbolesUtilisation conforme Protection de l’environne Ment Eléments de commandePremière mise en service FonctionnementSalissures normales Établir le raccordement de ré SeauNettoyage Fort encrassementTerminer le nettoyage Entretien et maintenancePlan de maintenance Vidange du réservoir deau salePannes Travaux de maintenanceProtection antigel Nettoyer le distributeur deau Panne RemèdePièces de rechange Caractéristiques techniquesNettoyer le tube daspiration Español Responsabilidad del operario GeneralidadesDurante la circulación Tareas DE MANTENIMIEN- to Y AcondicionamientoCuidado de la unidad por parte Del operario Indicaciones de seguridad Normas DE Seguridad Contra IncendiosÍndice de contenidos SímbolosUso previsto FunciónProtección del medio ambien Funcionamiento Elementos de mandoPrimera puesta en marcha Rellenar el depósito de agua lim PiaFinalizar la limpieza Establecimiento de la conexión RedLimpieza Vaciado del depósito de agua SuciaTransporte Cuidados y mantenimientoVaciado del depósito de agua Limpia Plan de mantenimientoProtección antiheladas AveríasCambio del cepillo rotativo Avería Modo de subsanarla Limpiar el distribuidor de agua Datos técnicosPiezas de repuesto Limpiar tubo de aspiraciónLimited Warranty Windsor IndustriesProduct exceptions and Exclusions Day Warranty Extension Available Page

Saber Blade 12 specifications

The Windsor Saber Blade 12 is a remarkable advancement in the field of high-performance cutting tools, designed to meet the demands of both professional and hobbyist users. This innovative blade is engineered for improved efficiency and precision, making it a coveted choice for various applications, from woodworking to metalworking.

One of the standout features of the Windsor Saber Blade 12 is its construction. Crafted from high-quality alloy steel, this blade ensures durability and longevity. The material is resistant to wear and tear, providing users with a reliable tool that maintains its cutting edge even after extensive use. Coupled with a heat treatment process that enhances hardiness, the Saber Blade 12 stands out in its class.

The blade boasts an impressive diameter of 12 inches, making it suitable for a variety of cutting tasks. Its design includes a fine-toothed edge, which allows for clean, precise cuts, reducing the need for sanding or additional finishing processes. This feature sets the Saber Blade 12 apart from competitors, demonstrating its commitment to efficiency and quality output.

In terms of technology, the Windsor Saber Blade 12 incorporates advanced tooth geometry. The unique tooth design minimizes friction during cutting, leading to quicker, smoother operations. This aspect is particularly beneficial for those working with dense materials, as it reduces the effort required and enhances overall performance.

Another key characteristic is the blade’s compatibility with a wide range of saws. Its standardized arbor hole ensures seamless integration with most table saws, miter saws, and sliding saws, making it a versatile addition to any workshop. This adaptability means that users can achieve optimal performance across various tools without the need for specialized equipment.

Additionally, the Windsor Saber Blade 12 prioritizes user safety. The blade is designed with a low kickback feature, which helps to minimize the risk of accidents during operation. This focus on safety, combined with its efficiency and precision, makes it an ideal choice for both experienced tradespeople and DIY enthusiasts.

In conclusion, the Windsor Saber Blade 12 is a cutting-edge tool that combines quality materials, innovative design, and safety features to deliver outstanding performance. Whether for professional use or personal projects, this blade sets a new standard in the cutting tool industry, ensuring users achieve superior results in their work.
Top Page Image Contents