Windsor Saber Blade 12 manual Connect to a Properly Grounded Outlet only, Operator Responsibility

Page 4

tachment plug that looks like the plug in illustration A. Make sure that the appli- ance is connected to an outlet having the same configuration as the plug. No adaptor should be used with this appli- ance.

CONNECT TO A PROPERLY GROUNDED OUTLET ONLY

1Grounded outlet

2Grounded outlet Box

3Grounded Pin

OPERATING SAFETY RULES

AND PRACTICES

Operator Responsibility

Save operation is in the responsibility of the operator.

The operator shall be familiar with the operation and function of all controls and instruments before operating the unit.

Before operating the unit, operators shall have read and be familiar with the operator’s manual for the particular unit being operated and they shall also abide by the safety rules and practices in the following paragraphs.

Before operating any unit, the operator shall be familiar with unusual operating conditions which may require additional safety precautions or special operating instructions.

General

Before starting to operate the unit be in operating position.

Do not start or operate the unit, any of its functions or attachments, from any place other than from the designated operators position.

Before leaving the operator’s position:

Abring the unit to a complete stop;

Bif the unit must be on an incline, block the wheels.

Maintain a safe distance from the edge of ramps, platforms, and other similar working surfaces.

Do not add to, or modify the unit.

Do not block access to fire aisles, stair- ways or fire equipment.

Traveling

Yield the right of way to pedestrians and emergency vehicles such as ambulanc- es and fire trucks.

Cross railroad tracks at an angle wher- ever possible. Do not park closer than 6 ft (1800 mm) to the nearest rail of a rail- road track.

Keep a clear view of the path of travel and observe for other traffic, personnel, and safe clearances.

Under all travel conditions, operate the unit at a speed that will pernit it to be brought to a stop in a safe manner.

Do not indulge in stunt driving or horse- play.

Slow down for wet and slippery floors. Before driving over a dockboard or bridge plate, be sure that it is properly secured. Drive carefully and slowly across the dockboard or bridge plate, and never exceed its rated capacity. When negotiating turns, reduce speed to a safe level consistent with the oper- ating environment. Make the turns smoothly.

4English

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Saber Blade Page Grounding Instructions To Reduce the Risk of ELEC- Tric SHOCK-USE Indoors onlyOperating Safety Rules Practices Connect to a Properly Grounded Outlet onlyOperator Responsibility GeneralFire Safety Standard Maintenance and RE Build PracticesOperator care of the unit Function SymbolsProper use Control elements Environmental protectionInitial startup Fill solution tank CleaningComplete cleaning OperationMaintenance and care Emptying the recovery tankEmptying the solution tank TransportFaults Maintenance scheduleMaintenance Works Frost protectionError Remedy Technical specifications Clean water distributorClean suction tube Spare partsConserver CES Instruc Tions Instructions Visant LA Mise À LA Terre NE Brancher QUÀ UNE Prise DE Courant Avec Mise À LA TerreRegles ET Pratiques DE Securite DE FONCTION- Nement Responsabilité de lopérateurDéplacements Pratiques Dentretien ET DE ReconstructionGénéralités Entretien de lunité par lopéra TeurTable des matières Norme DE Securite CendieConsignes de sécurité Fonction SymbolesUtilisation conforme Eléments de commande Première mise en serviceProtection de l’environne Ment FonctionnementÉtablir le raccordement de ré Seau NettoyageSalissures normales Fort encrassementEntretien et maintenance Plan de maintenanceTerminer le nettoyage Vidange du réservoir deau salePannes Travaux de maintenanceProtection antigel Nettoyer le distributeur deau Panne RemèdePièces de rechange Caractéristiques techniquesNettoyer le tube daspiration Español Responsabilidad del operario GeneralidadesDurante la circulación Tareas DE MANTENIMIEN- to Y AcondicionamientoCuidado de la unidad por parte Del operario Normas DE Seguridad Contra Incendios Índice de contenidosIndicaciones de seguridad SímbolosUso previsto FunciónProtección del medio ambien Elementos de mando Primera puesta en marchaFuncionamiento Rellenar el depósito de agua lim PiaEstablecimiento de la conexión Red LimpiezaFinalizar la limpieza Vaciado del depósito de agua SuciaCuidados y mantenimiento Vaciado del depósito de agua LimpiaTransporte Plan de mantenimientoProtección antiheladas AveríasCambio del cepillo rotativo Avería Modo de subsanarla Datos técnicos Piezas de repuestoLimpiar el distribuidor de agua Limpiar tubo de aspiraciónLimited Warranty Windsor IndustriesProduct exceptions and Exclusions Day Warranty Extension Available Page

Saber Blade 12 specifications

The Windsor Saber Blade 12 is a remarkable advancement in the field of high-performance cutting tools, designed to meet the demands of both professional and hobbyist users. This innovative blade is engineered for improved efficiency and precision, making it a coveted choice for various applications, from woodworking to metalworking.

One of the standout features of the Windsor Saber Blade 12 is its construction. Crafted from high-quality alloy steel, this blade ensures durability and longevity. The material is resistant to wear and tear, providing users with a reliable tool that maintains its cutting edge even after extensive use. Coupled with a heat treatment process that enhances hardiness, the Saber Blade 12 stands out in its class.

The blade boasts an impressive diameter of 12 inches, making it suitable for a variety of cutting tasks. Its design includes a fine-toothed edge, which allows for clean, precise cuts, reducing the need for sanding or additional finishing processes. This feature sets the Saber Blade 12 apart from competitors, demonstrating its commitment to efficiency and quality output.

In terms of technology, the Windsor Saber Blade 12 incorporates advanced tooth geometry. The unique tooth design minimizes friction during cutting, leading to quicker, smoother operations. This aspect is particularly beneficial for those working with dense materials, as it reduces the effort required and enhances overall performance.

Another key characteristic is the blade’s compatibility with a wide range of saws. Its standardized arbor hole ensures seamless integration with most table saws, miter saws, and sliding saws, making it a versatile addition to any workshop. This adaptability means that users can achieve optimal performance across various tools without the need for specialized equipment.

Additionally, the Windsor Saber Blade 12 prioritizes user safety. The blade is designed with a low kickback feature, which helps to minimize the risk of accidents during operation. This focus on safety, combined with its efficiency and precision, makes it an ideal choice for both experienced tradespeople and DIY enthusiasts.

In conclusion, the Windsor Saber Blade 12 is a cutting-edge tool that combines quality materials, innovative design, and safety features to deliver outstanding performance. Whether for professional use or personal projects, this blade sets a new standard in the cutting tool industry, ensuring users achieve superior results in their work.
Top Page Image Contents