Wayne-Dalton 9700 installation instructions Vertical Tracks, Stacking Sections, Flagangle Cable

Page 10

6

Tools Needed:

3/16” Drill Bit

Power Drill

7/16” Socket

Driver

Tape Measure

Level

Vertical Tracks

IMPORTANT: The tops of the vertical tracks must be level from side to side. If the bottom section was shimmed to level it. The vertical track on the shimmed side, must be raised the height of the shim.

Position the left hand vertical track assembly over the rollers of the bottom section. Make sure the counterbalance cable is located between the rollers and the door jamb. Drill 3/16” pilot holes for the lag screws. Loosely fasten jamb brackets and flagangles to the jamb using 5/16” x 1-5/8” lag screws.

Hang counterbalance cable over flagangle.

Repeat for the right side.

FLAGANGLE

CABLE

5/16” x

1-5/8” LAG SCREWS

VERTICAL

TRACK

ASSEMBLY

JAMB

BRACKET

BOTTOM

SECTION

Vertical track

BOTTOM SECTION

3/8”

TO 5/8”

Roller

Flagangle lag screw locations

12r FA

15r FA

12r qi

15r qi

Quick install jamb bracket

Lag

screw

7

Stacking Sections

LOCK SECTION

 

Tools Needed:

NOTE: For door section identification see

 

Power Drill

page 4.

 

NOTE: Make sure hinges are flipped down,

 

7/16” Socket

 

when stacking another section on top.

 

Driver

 

 

 

Place rollers in hinges tubes of the second section (lock section).

With assistance, lift second section and guide rollers into the vertical tracks.

NOTE: Align vertical marks in the upper align- ment sticker, with the lower alignment sticker on right hand side on the back of door. Verify that that the stile patterns on your door sec- tions are aligned on the outside of the door.

To connect sections, keep sections aligned

(2) 1/4” - 14 X 5/8”

(2) 1/4” - 14 X 5/8”

and fasten center hinges first and end hinges

SELF-TAPPING SCREWS

SELF-TAPPING SCREWS

last using 1/4” - 14 x 5/8” self-tapping

 

 

screws.

 

 

Repeat for other section(s) except top section.

 

 

 

 

Alignment

 

 

stickers

 

End hinges

10Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 9700 Important NoticeTable of Contents Package Contents Labels on each end stile Each section except top sectionUsed to identify each section EndstileTools Required Removing An Existing DoorBackroom requirement Preparing the OpeningHeadroom requirement Track Type MIN. HeadroomTracks InstallationQuick Install TAB Unlocked Flagangle Vertical TrackHorizontal Angles Installing Jamb BracketsTools Needed Hammer Bottom Section DrumsTools Needed None Stacking Sections Vertical Track Assembly Jamb Bracket Bottom SectionVertical Tracks Flagangle CableBar Self Tapping ScrewsOperator Bracket Roller Top BracketsTop Section TOP Bracket SlideHorizontal Track Tion Causing Severe or FatalFlagangles Truss Head BoltTorqueMaster Spring Tube Adjusting Top BracketsTools Needed Wrench Step Ladder Center Bracket Bushing Center Bracket AssemblyCenter Bracket Bushing Cable Drums/ Drum Wraps 2 WrapsWrench Socket Driver Step Ladder Securing Center Bracket AssemblyEnd Brackets Ratchet wheel is required on the leftSecuring Door For Spring Winding Cable AdjustmentTools Needed Vice Clamps Leather gloves be worn while Winding SpringsIt is recommended that Winding the TorqueMasterImportant Mark number of spring Securing Drum WrapsTurns on TorqueMaster Plus end bracket Result in door falling Rear SupportRaising door further can Cause severe or fatal injuryWheel from the Recommended Spring Turn ChartFull Tension of the Spring Number of Turns Shown onTorqueMaster Plus Reset InstructionsBalancing Door TorqueMaster Plus Reset InstructionsChecking Springs for Tension PawlPawl knob in Lower Position Place vice clamps Above 3rd Roller on both vertical trackAttached to Track Pawl knob in upper PositionAs shown Pull RopeJamb approximately 48 to 50 1220 to No Scew EYE Pull Rope Bottom BracketFailure to Test or Make ANY Trolley OperatorMAY Result in Severe or Fatal Injury Painting CleaningAcrylic Cleaning Instructions Important do not USE a Pressure Washer on Your Garage DoorPainting Lifetime Limited Warranty Model YouThank you for your purchase
Related manuals
Manual 2 pages 15.21 Kb Manual 18 pages 29.29 Kb Manual 4 pages 60.02 Kb Manual 2 pages 14.43 Kb

9700 specifications

Wayne-Dalton is a well-known brand in the garage door industry, offering a wide range of models designed for durability, performance, and aesthetic appeal. Among its most popular series are the 9700, 5000, 8000, 9000, and 9800, each equipped with unique features and advanced technologies to meet diverse customer needs.

The Wayne-Dalton 9700 series is known for its combination of strength and insulation. This garage door is manufactured with a three-layer construction providing robust protection against the elements while offering excellent energy efficiency. The insulated steel construction can help maintain interior temperatures, making it ideal for attached garages.

The 5000 series, on the other hand, is designed for a more traditional look combined with modern performance. Featuring a lightweight design, it is made from durable materials that resist rust and corrosion. The 5000 series can be customized with different colors and styles, allowing homeowners to achieve the perfect aesthetic to enhance their property.

Moving on to the 8000 series, this model is designed for commercial applications and residential use where heavy-duty functions are necessary. It is built to withstand extreme weather conditions while providing optimal security with added strength features. The 8000 series offers smooth operation and minimal maintenance requirements, making it a great choice for those seeking reliability.

The 9000 series stands out with its stylish design and sleek finishes. This series offers advanced insulation options, coupled with numerous panel designs that provide a polished and sophisticated look. The 9000 model emphasizes both aesthetics and energy efficiency, making it a favorite among homeowners looking for a beautiful yet functional garage door.

Lastly, the 9800 series is the premium option within Wayne-Dalton’s offerings. This series is characterized by its high insulation value and thermal efficiency, thanks to its innovative construction techniques. The 9800 doors can be customized with numerous panel options and colors, delivering a luxury look while ensuring excellent performance.

In conclusion, Wayne-Dalton’s 9700, 5000, 8000, 9000, and 9800 series garage doors each feature distinctive characteristics and technologies aimed at enhancing durability, security, and aesthetics. Homeowners can find a reliable option within this range that suits their specific requirements, whether they prioritize insulation, style, or heavy-duty functionality. With Wayne-Dalton’s commitment to quality and innovation, these garage doors stand out in today’s market.
Top Page Image Contents