Wayne-Dalton 9700 Securing Door For Spring Winding, Cable Adjustment, Tools Needed Vice Clamps

Page 19

19

Tools Needed:

(2) Vice Clamps

Securing Door

for Spring Winding

Place vice clamps onto both vertical tracks just above the third Roller. This is to prevent the garage door from raising while winding torsion spring(s).

WARNING

Failure to place vice clamps onto vertical Track can allow door to raise and cause severe or fatal injury.

Place vice

clamps above

3rd Roller

Vice clamps

attached to Track track

20

Cable Adjustment

Cam Peak

First and

 

second groove

 

 

Straight Up

 

Tools Needed:

Starting on the right side, adjust the cable

 

 

Vice Grips

drum assembly by rotating the drum until

 

 

the set screw faces directly away from the

 

 

 

 

 

Pliers/Wire

header. Torque tube cam peak should be

Cut Cable

 

pointing straight up.

 

Cutters

 

Loosen the set screw no more than 1/2 turn.

Here

Set Screw

 

 

Flat Tip

Ensure counterbalance cable is aligned and

 

 

Screwdriver

seated in the first and second grooves and

6”

 

 

pull on the end of the counterbalance cable

 

 

 

 

Step Ladder

to remove all cable slack.

 

 

Snug the set screw, and then tighten an additional1-1/2 turns. Measure approximately 6” of cable and cut off excess cable. Insert end of cable in hole of cable drum.

Repeat for left hand cable drum assembly.

IMPORTANT: ENSURE THE CABLE IS

ALIGNED AND SEATED IN THE FIRST

AND SECOND GROOVES OF THE CABLE

DRUM PRIOR TO WINDING SPRINGS.

NOTE: This illustration shows the right hand TorqueMaster® Plus cable drum assembly, left hand cable drum assembly is symmetrically opposite.

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

19

 

local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com

 

 

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Important Notice 9700Table of Contents Package Contents Endstile Each section except top sectionUsed to identify each section Labels on each end stileRemoving An Existing Door Tools RequiredTrack Type MIN. Headroom Preparing the OpeningHeadroom requirement Backroom requirementFlagangle Vertical Track InstallationQuick Install TAB Unlocked TracksHorizontal Angles Installing Jamb BracketsTools Needed Hammer Bottom Section DrumsTools Needed None Flagangle Cable Vertical Track Assembly Jamb Bracket Bottom SectionVertical Tracks Stacking SectionsSelf Tapping Screws BarOperator Bracket TOP Bracket Slide Top BracketsTop Section RollerTruss Head Bolt Tion Causing Severe or FatalFlagangles Horizontal TrackTorqueMaster Spring Tube Adjusting Top BracketsTools Needed Wrench Step Ladder Center Bracket Bushing Center Bracket AssemblyCenter Bracket Bushing 2 Wraps Cable Drums/ Drum WrapsRatchet wheel is required on the left Securing Center Bracket AssemblyEnd Brackets Wrench Socket Driver Step LadderSecuring Door For Spring Winding Cable AdjustmentTools Needed Vice Clamps Winding the TorqueMaster Winding SpringsIt is recommended that Leather gloves be worn whileImportant Mark number of spring Securing Drum WrapsTurns on TorqueMaster Plus end bracket Cause severe or fatal injury Rear SupportRaising door further can Result in door fallingNumber of Turns Shown on Spring Turn ChartFull Tension of the Spring Wheel from the RecommendedInstructions TorqueMaster Plus ResetPawl TorqueMaster Plus Reset InstructionsChecking Springs for Tension Balancing DoorPawl knob in upper Position Place vice clamps Above 3rd Roller on both vertical trackAttached to Track Pawl knob in Lower PositionNo Scew EYE Pull Rope Bottom Bracket Pull RopeJamb approximately 48 to 50 1220 to As shownFailure to Test or Make ANY Trolley OperatorMAY Result in Severe or Fatal Injury Important do not USE a Pressure Washer on Your Garage Door CleaningAcrylic Cleaning Instructions PaintingPainting You Lifetime Limited Warranty ModelThank you for your purchase
Related manuals
Manual 2 pages 15.21 Kb Manual 18 pages 29.29 Kb Manual 4 pages 60.02 Kb Manual 2 pages 14.43 Kb

9700 specifications

Wayne-Dalton is a well-known brand in the garage door industry, offering a wide range of models designed for durability, performance, and aesthetic appeal. Among its most popular series are the 9700, 5000, 8000, 9000, and 9800, each equipped with unique features and advanced technologies to meet diverse customer needs.

The Wayne-Dalton 9700 series is known for its combination of strength and insulation. This garage door is manufactured with a three-layer construction providing robust protection against the elements while offering excellent energy efficiency. The insulated steel construction can help maintain interior temperatures, making it ideal for attached garages.

The 5000 series, on the other hand, is designed for a more traditional look combined with modern performance. Featuring a lightweight design, it is made from durable materials that resist rust and corrosion. The 5000 series can be customized with different colors and styles, allowing homeowners to achieve the perfect aesthetic to enhance their property.

Moving on to the 8000 series, this model is designed for commercial applications and residential use where heavy-duty functions are necessary. It is built to withstand extreme weather conditions while providing optimal security with added strength features. The 8000 series offers smooth operation and minimal maintenance requirements, making it a great choice for those seeking reliability.

The 9000 series stands out with its stylish design and sleek finishes. This series offers advanced insulation options, coupled with numerous panel designs that provide a polished and sophisticated look. The 9000 model emphasizes both aesthetics and energy efficiency, making it a favorite among homeowners looking for a beautiful yet functional garage door.

Lastly, the 9800 series is the premium option within Wayne-Dalton’s offerings. This series is characterized by its high insulation value and thermal efficiency, thanks to its innovative construction techniques. The 9800 doors can be customized with numerous panel options and colors, delivering a luxury look while ensuring excellent performance.

In conclusion, Wayne-Dalton’s 9700, 5000, 8000, 9000, and 9800 series garage doors each feature distinctive characteristics and technologies aimed at enhancing durability, security, and aesthetics. Homeowners can find a reliable option within this range that suits their specific requirements, whether they prioritize insulation, style, or heavy-duty functionality. With Wayne-Dalton’s commitment to quality and innovation, these garage doors stand out in today’s market.
Top Page Image Contents