Wayne-Dalton 9300 Securing Door, Securing Center Bracket Assembly, Tened to Header

Page 18

19

Securing Center Bracket Assembly

Tools Needed:

NOTE: If you are not installing the idrive® opener on

 

your garage door, you must install the center bracket

Power Drill

bushing assembly, follow these instructions.

3/16” Drill Bit

IMPORTANT: TORQUEMASTER® SPRING

 

TUBE ASSEMBLY MUST BE LEVEL BEFORE

7/16”

CENTER BRACKET ASSEMBLY IS FAS-

Socket Driver

TENED TO HEADER.

Step Ladder

To locate the center bracket, mark the header halfway

 

between the flagangles and level the TorqueMaster®

 

spring tube assembly. Drill 3/16” pilot holes into

 

header for the lag screws. Fasten the metal bracket

 

to the header using (2) 5/16” X 1-5/8” lag screws.

 

 

CENTER BRACKET

BUSHING ASSEMBLY

(2) 5/16” X 1-5/8”

HEX HEAD LAG

SCREWS

2019

 

Securing Door

 

for Spring Winding

Tools Needed:

Place vice clamps onto both vertical tracks just

 

above the third roller. This is to prevent the garage

(2) Vice Clamps

door from raising while winding counterbalance

 

springs.

 

 

 

 

 

 

WARNING

 

FAILURE TO PLACE VICE CLAMPS

 

ONTO VERTICAL TRACK CAN

 

ALLOW DOOR TO RAISE AND

 

CAUSE SEVERE OR FATAL

 

INJURY.

PLACE VICE

CLAMPS ABOVE

3RD ROLLER (BOTH SIDES)

TRACK

VICE CLAMPS

ATTACHED TO

INNER RAIL

OF TRACK

18

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Series Copyright 2008 Wayne-Dalton CorpTable of Contents Definition of key words used in this manualPackage Contents Lock Stile Door Section IdentificationOperator Stile Side View AstragalGloves Tools RequiredRemoving An Existing Door SAW Horses Pair Step LadderTools from Preparing the OpeningTools Needed Must be ReplacedQuick Install TAB Locked InstallationAttaching Quick Install Flag Angle to Vertical TrackTo Vertical Track Horizontal AngleTOP Installing Q.I. Jamb BracketsRight Side Shown 3RD SET HolesDrums Allowing door to fall, possiblyBuilding Looking OUT Important the Tops Bottom SectionVertical Track ShimTop Bracket Slide 4 20 x 1 carriage boltsDoor Operation Important the DimensionTop Section Nail TOP SectionAttaching Horizontal Track to Quick Install FlagangleFully Adjustable Flagangle Attaching Horizontal Track toTorquemaster Spring Tube Assembly Labeled END Adjusting Top Bracket SlideAssembly TorqueMaster Spring TubeCable Drums Center Bracket AssemblyCenter Bracket Assembly Torquemaster Spring Tube 2 Wrap ShownRight END Bracket Groove SplinesTAG HEX Head LAGTened to Header Securing Center Bracket AssemblySecuring Door For Spring WindingHands Cable AdjustmentWinding Springs Recommended Spring TurnsFrom Vertical Tracks Important Pawl Knob Must beTag Tabs Engage the Third RIBUP Position Rear SupportDoor VicePerforated Angle Bolts & Nuts TorqueMaster Plus Reset InstructionsImportant be Prepared to Support Total Weight of the Door Spring DoorsSide Lock Unlocked Position if ANCleaning Pull RopeTrolley Operator Limited Warranty Model Thank you for your purchase

9300 specifications

The Wayne-Dalton 9300 is a high-quality insulated steel garage door renowned for its durability, energy efficiency, and aesthetic appeal. Designed to meet a range of residential needs, the 9300 series combines performance with style, making it a popular choice among homeowners.

One of the standout features of the Wayne-Dalton 9300 is its construction. The door consists of a robust, 2-inch thick panel that is filled with high-density polystyrene insulation. This insulation not only provides excellent thermal performance but also contributes to the door's overall strength. With an R-value of up to 13.4, the 9300 series helps maintain a comfortable temperature in the garage while reducing energy costs for heating or cooling adjacent spaces.

In terms of design flexibility, the Wayne-Dalton 9300 is available in a variety of colors and finishes, allowing homeowners to match their garage doors to their home’s exterior. The door is constructed using steel that is pre-painted and baked with a tough finish to resist fading, chipping, and denting. Homeowners can choose from various contemporary and traditional styles, ensuring a perfect fit for any architectural design.

The Wayne-Dalton 9300 also incorporates advanced technology, such as the TorqueMaster® lifting system. This innovative system provides a torsion spring lift that is safely contained within the door's structure, reducing the risk of injury and ensuring smooth operation. Additionally, the 9300 series comes equipped with high-quality weather seals that protect against wind, rain, and snow, enhancing the door’s performance in various weather conditions.

Moreover, the 9300 series emphasizes safety features, including pinch-resistant design, which helps to prevent fingers from getting caught during operation. The doors also utilize high-performance rollers and sturdy hardware to ensure reliable, quiet, and long-lasting operation.

In summary, the Wayne-Dalton 9300 is an excellent choice for those seeking a durable, energy-efficient, and stylish garage door. With its advanced insulation technology, variety of design options, innovative lifting system, and emphasis on safety, the 9300 series stands out as a top contender in the market for residential garage doors. It offers homeowners peace of mind while enhancing the overall curb appeal of their property.
Top Page Image Contents