Electrical Shock Hazards, Motion Hazards

INSTRUCTIONS MANUAL

READ ALL SAFETY INFORMATION CAREFULLY before attempting to install, operate or service this equipment. Failure to comply with these instructions could result in personal injuryand/or property damage.

RETAIN THE FOLLOWING SAFETYINFORMATION FOR FUTURE REFERENCE. Published standards on safetyare available. They are listed in ADDITIONAL SAFETY INFORMATION at the end of this SAFETYSUMMARY.

The National Electrical Code, Occupational Safetyand Health Act regulations, local industrial codes and local inspection requirements also provide a basis for equipment installation, use and service.

•The following safety alert symbols identify important safety messages in this manual.

•When you see one of the symbols shown here, be alert to the possibility of personal injuryand carefully read the message that follows.

ELECTRICAL SHOCK HAZARDS

WARNING:

• To reduce the risk of electric shock, unplug the air service center from the outlet before attempting anymaintenance or cleaning. Turning off controls will not reduce this risk.

•Do not operate the VR-6000 with a damaged cord or plug — replace the cord or plug immediately. To reduce the risk of damage to electric plug and cord, disconnect charger bypulling on the plug rather than the cord.

•An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure:

a.That pins on plug of extension cord are the same number, size, and shape as those on plug on recycler.

b.That extension cord is properly wired and in good electrical condition; and

c.That the wire size is large enough for the length of cord as specified below:

Length of cord in feet:	25	50	100	150
AWG size of cord:	16	12	10	8

MOTION HAZARDS

WARNING:

• Engine parts that are in motion and unexpected movement of a vehicle can injure or kill. When working near moving engine part, wear snug fit clothing and keep hands and fingers away from moving parts. Keep hoses and tools clear of moving parts. Always stay clear of moving engine parts. Hoses and

tools can be thrown through the air if not kept clear of moving engine parts.

•The unexpected movement of a vehicle can injure or kill. When working on a vehicle, always set the parking brake or block the wheels of the vehicle being serviced.

FUME HAZARDS

WARNING:

• FUMES, GASES, AND VAPORS CAN CAUSE DISCOMFORT, ILLNESS, AND DEATH! To reduce the risk of discomfort, illness, or death, read, understand, and follow the following safety instructions. In addition, make certain that

VR-6000 specifications

The Viper VR-6000 is an innovative addition to the realm of virtual reality headset technology, designed to offer users an immersive and visually stunning experience. Built with meticulous attention to detail, the VR-6000 provides an ideal mix of high-end performance, comfort, and cutting-edge features that cater to both gamers and tech enthusiasts alike.

One of the standout characteristics of the Viper VR-6000 is its high-resolution display. The headset boasts a dual 4K OLED screen that delivers an exceptional pixel density, resulting in incredibly sharp visuals and vibrant colors that breathe life into the virtual environments. This feature significantly enhances the sense of realism, making every gaming session or virtual experience captivating.

The VR-6000 is powered by advanced refresh rate technology, providing a refresh rate of up to 120 Hz. This ensures smooth and fluid visuals, minimizing motion blur and enhancing responsiveness during fast-paced action scenes. Coupled with low-latency tracking, players can enjoy an almost instantaneous response as they move within their virtual space, making the experience feel more natural and engaging.

Comfort is another focal point of the Viper VR-6000 design. The headset has a lightweight frame and adjustable padding, which accommodates prolonged use without discomfort. It is designed to fit a wide range of head sizes, with a customizable strap system ensuring a secure and snug fit. Additionally, the integrated audio system features spatial sound technology that offers 3D audio experiences, allowing users to hear sounds from all directions, further enhancing immersion.

On the technological front, the Viper VR-6000 comes equipped with advanced motion tracking sensors. Utilizing a combination of inside-out tracking and external base stations, it allows for precise movement detection, which is crucial for room-scale VR experiences. Users can move freely within their designated space, and the system accurately reflects these movements in real time.

Compatibility is another highlight of the VR-6000. It supports a wide range of platforms, including both PC and console, allowing users to access an extensive library of VR titles. Moreover, the headset includes easy-to-use connectivity options, such as wireless capability and USB-C support, ensuring seamless integration with various devices.

In summary, the Viper VR-6000 represents a significant leap in virtual reality technology, offering an impressive array of features and capabilities. With its high-resolution display, advanced motion tracking, exceptional comfort, and compatibility with multiple platforms, it stands out as a top choice for those seeking an immersive VR experience. Whether for gaming, simulations, or interactive media, the VR-6000 promises to elevate the way users engage with the virtual world.