Bacharach 3015-4256 manual Working with Gas Alarms, Working with System Faults

Page 22

Working with Gas Alarms

Functional Overview

If the refrigerant level in the area being monitored exceeds its preset Leak, Spill, or Evacuate Alarm level (Page 17), the HGMSZ will detect this alarm condition and turn ON the front panel ALARM light. Additionally, an external alarm device may activate and the monitor’s internal audible alarm may sound if those features have been enabled (Pages 10 & 17).

Clearing / Silencing a Gas Alarm

Once the gas-alarm circuit has been triggered all alarm indicators remain turned ON, even after the detected gas level returns to normal. Press the SILENCE button to clear all gas-alarm indicators after the cause of the alarm has been cleared and the detected gas level has dropped below all alarm levels.

Pressing the SILENCE button while a gas-alarm condition still exists causes the internal audible alarm and all external alarm devices that are connected to the alarm relays to turn OFF for a period of time as set by the SILENCE function (Page 16). The front panel ALARM light remains ON, however, as an indication that an alarm condition still exists, but will automatically turn OFF once the gas level returns to normal. The alarm circuit will reactivate at the end of the silence period if the detected gas level is still above an alarm level.

Viewing the Gas Alarm Log

From the Data Display screen, use the Keypad buttons to place the arrow (>) on the display next to the ALARMS function. Then press ENTER to display the alarm log.

The alarm log shows the type of alarm (LEAK, SPILL, or EVAC), plus the date and time it occurred. If CLEAR is displayed, this indicates that an alarm was acknowledged at the date and time shown.

Immediately after selecting the ALARMS function, the most recent alarm event is displayed. In the example below, record #03 shows that a Spill Alarm occurred on 11/10/03 at 15:06. Note that if more than 30 alarm events have occurred, then the newest event overwrites the oldest.

#03

SPILL @

11/10/03 15:06

Note that the Alarm Log can be cleared as described in Section Clearing the Stored PPM Log, Alarms & Faults Data on Page 20.

Working with System Faults

Functional Overview

If a system malfunction occurs (see Fault Code list on Page 19), the HGMSZ will detect the problem and turn ON the front panel SYSTEM FAULT light. Additionally, an external alarm device may activate and the monitor’s internal audible alarm may sound if those features have been enabled (Pages 10 & 17).

Clearing / Silencing a Fault Alarm

The SYSTEM FAULT light and all other fault indicators will automatically turn OFF after the cause of the fault has been eliminated.

Pressing the SILENCE button while a fault-alarm condition still exists causes the internal audible alarm and the external alarm device that is connected to the fault relay to turn OFF for a period of time as set by the SILENCE function (Page 16). The front panel SYSTEM FAULT light remains ON, however, as a reminder that a fault condition still exists. The alarm circuit will reactivate at the end of the silence period if the cause of the fault condition has not been corrected. The SYSTEM FAULT light will automatically turn OFF once the fault has been cleared.

18

Instruction 3015-4256

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Installation / Operation / Maintenance Hgmsz Halogen Gas Monitor Single ZoneDeclaration of Conformity Table of Contents Entering Custom Refrigerant Calibration Values How to Use This Manual Hazard Symbols on MonitorSafety Precautions Understanding Monitoring Levels Functional OverviewGeneral Description Response to the Presence of Multiple RefrigerantsSuggested Location of Sampling Point Inspection Installation ConsiderationsLocating the Monitor Mounting Instructions Connecting Gas Sample and Exhaust LinesOverview Connecting the Exhaust Line Connecting the Gas-Sample LineTubing Considerations Interior Schematic Interior SchematicElectrical Wiring Connecting External Alarms ConnectionTypical External Alarm Relay 1 Wiring MA Current Loop InterfaceInstruction Front Panel Display and Controls General OperationDisplay Screens Initial Power UpData Display Screen Function Screens R134A Calfactor Audible Alarm is OFF Working with Gas Alarms Working with System FaultsViewing the Fault Log Fault CodesReset to Factory Default Settings Clearing the Stored PPM Log, Alarms & Faults DataEntering Custom Refrigerant Calibration Values Working with the Diagnos Function First Diagnostic ScreenSecond Diagnostic Screen Keypad FunctionsWorking with the P-CHK Function Screen DisplayAdjusting Calibration Factor Calibration ProcedureWorking with the Calibration Function Instruction Hydrophobic Filter Clock BatteryCharcoal Filter Servicing Air LinesReplacement Parts Replacement Parts & Optional AccessoriesOptional Accessories Table of Recommended Alarm Settings AppendixWarranty Warranty and ServiceRegister Your Warranty by Visiting Service Return Procedure Field RepairSpecifications HalonPage Bacharach, Inc Dart Road, Newnan GA Ph 678-423-2481 Fax

3015-4256 specifications

Bacharach 3015-4256 is a highly regarded integrated air quality monitor designed for both commercial and residential applications. This advanced device focuses on detecting and analyzing various air pollutants, ensuring that indoor environments remain healthy and safe for occupants. Its sleek, compact design allows for easy integration into any space, making it an ideal choice for those looking to enhance air quality without compromising aesthetics.

One of the standout features of the Bacharach 3015-4256 is its advanced sensor technology. Equipped with multiple sensors, it can accurately measure levels of carbon dioxide, volatile organic compounds, particulate matter, and humidity. This multi-faceted approach to air quality monitoring ensures comprehensive data collection, allowing users to assess and understand their indoor environment better. The sensors undergo rigorous calibration to maintain accuracy over time, which is critical for effective air quality management.

Another key characteristic of the Bacharach 3015-4256 is its real-time data reporting capabilities. The device continuously monitors air quality levels and provides instant feedback through an easy-to-read display. Users can view real-time updates on air quality metrics, helping them make informed decisions about ventilation and air purification needs. Additionally, the monitor can connect to a mobile app, enabling users to access data remotely, set alerts for specific pollutant levels, and track changes over time.

Safety and user-friendliness are central to the design of this air quality monitor. The device features simple installation guidelines, requiring minimal setup to start monitoring air quality effectively. It also incorporates user-friendly controls, allowing individuals to navigate through settings and features with ease.

Moreover, the Bacharach 3015-4256 is designed with energy efficiency in mind. It operates on low power consumption, making it not only cost-effective but also environmentally friendly.

In summary, the Bacharach 3015-4256 is a sophisticated air quality monitor that offers advanced sensor technology, real-time data reporting, ease of use, and energy-efficient design. Its blend of performance and practicality makes it a valuable tool for anyone committed to maintaining a healthy indoor environment.
Top Page Image Contents