Bacharach 3015-4256 manual Installation Considerations, Inspection, Locating the Monitor

Page 9

Installation

Installation Considerations

Warnings and Cautions

WARNING: Drilling holes in the HGMSZ enclosure will void the warranty. Please use knockouts provided for electrical connections.

WARNING: Do not mount the HGMSZ in an area that may contain flammable liquids, vapors or aerosols. Operation of any electrical equipment in such an environment constitutes a safety hazard.

WARNING: Always disconnect AC power before working inside monitor.

CAUTION: The HGMSZ contains sensitive electronic components that can be easily damaged. Be careful not to touch or disturb any of these components.

Inspection

The HGMSZ has been thoroughly inspected and tested prior to shipment from the factory. Nevertheless, it is recommended that the monitor be re-checked prior to installation. Inspect the outside of the enclosure to make sure there are no obvious signs of shipping damage. Open the enclosure and inspect the interior of the monitor for loose components that may have become dislodged during shipment. If damage is discovered, please contact the nearest Bacharach Service Center for assistance.

Locating the Monitor

Locate the HGMSZ so that no more than 50 ft (15.2 m) of tubing will be needed to reach the sampling area, and that no more than 50 ft (15.2 m) of tubing will be required for the exhaust. Since the monitor uses ambient air to zero its gas sensor, the monitor should be located in an area that normally does not contain refrigerant gas. If an exhaust line is not used, then locate the monitor in a well ventilated area so that the exhaust gas does not accumulate around the monitor’s ventilation holes.

The HGMSZ should be operated in an environment that is between 32 and 122°F (0 and 50°C), has a relative humidity of between 5 and 90% non-condensing, and is at an altitude of no more than 6,562 ft (2,000 m). The area should also be relatively free of dirt, grease, and oils that could adversely affect the operation of the monitor.

The location should allow the monitor to be easily accessible for visual monitoring and servicing.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Hgmsz Halogen Gas Monitor Single Zone Installation / Operation / MaintenanceDeclaration of Conformity Table of Contents Entering Custom Refrigerant Calibration Values Hazard Symbols on Monitor How to Use This ManualSafety Precautions General Description Functional OverviewUnderstanding Monitoring Levels Response to the Presence of Multiple RefrigerantsSuggested Location of Sampling Point Installation Considerations InspectionLocating the Monitor Connecting Gas Sample and Exhaust Lines Mounting InstructionsOverview Connecting the Gas-Sample Line Connecting the Exhaust LineTubing Considerations Interior Schematic Interior SchematicElectrical Wiring Connection Connecting External AlarmsMA Current Loop Interface Typical External Alarm Relay 1 WiringInstruction General Operation Front Panel Display and ControlsInitial Power Up Display ScreensData Display Screen Function Screens R134A Calfactor Audible Alarm is OFF Working with System Faults Working with Gas AlarmsFault Codes Viewing the Fault LogClearing the Stored PPM Log, Alarms & Faults Data Reset to Factory Default SettingsEntering Custom Refrigerant Calibration Values Second Diagnostic Screen First Diagnostic ScreenWorking with the Diagnos Function Keypad FunctionsScreen Display Working with the P-CHK FunctionCalibration Procedure Adjusting Calibration FactorWorking with the Calibration Function Instruction Charcoal Filter Clock BatteryHydrophobic Filter Servicing Air LinesReplacement Parts & Optional Accessories Replacement PartsOptional Accessories Appendix Table of Recommended Alarm SettingsWarranty and Service WarrantyRegister Your Warranty by Visiting Service Field Repair Return ProcedureHalon SpecificationsPage Bacharach, Inc Dart Road, Newnan GA Ph 678-423-2481 Fax

3015-4256 specifications

Bacharach 3015-4256 is a highly regarded integrated air quality monitor designed for both commercial and residential applications. This advanced device focuses on detecting and analyzing various air pollutants, ensuring that indoor environments remain healthy and safe for occupants. Its sleek, compact design allows for easy integration into any space, making it an ideal choice for those looking to enhance air quality without compromising aesthetics.

One of the standout features of the Bacharach 3015-4256 is its advanced sensor technology. Equipped with multiple sensors, it can accurately measure levels of carbon dioxide, volatile organic compounds, particulate matter, and humidity. This multi-faceted approach to air quality monitoring ensures comprehensive data collection, allowing users to assess and understand their indoor environment better. The sensors undergo rigorous calibration to maintain accuracy over time, which is critical for effective air quality management.

Another key characteristic of the Bacharach 3015-4256 is its real-time data reporting capabilities. The device continuously monitors air quality levels and provides instant feedback through an easy-to-read display. Users can view real-time updates on air quality metrics, helping them make informed decisions about ventilation and air purification needs. Additionally, the monitor can connect to a mobile app, enabling users to access data remotely, set alerts for specific pollutant levels, and track changes over time.

Safety and user-friendliness are central to the design of this air quality monitor. The device features simple installation guidelines, requiring minimal setup to start monitoring air quality effectively. It also incorporates user-friendly controls, allowing individuals to navigate through settings and features with ease.

Moreover, the Bacharach 3015-4256 is designed with energy efficiency in mind. It operates on low power consumption, making it not only cost-effective but also environmentally friendly.

In summary, the Bacharach 3015-4256 is a sophisticated air quality monitor that offers advanced sensor technology, real-time data reporting, ease of use, and energy-efficient design. Its blend of performance and practicality makes it a valuable tool for anyone committed to maintaining a healthy indoor environment.
Top Page Image Contents