Bacharach 3015-4256 Charcoal Filter, Hydrophobic Filter, Servicing Air Lines, Fuses, Sample Pump

Page 29

Maintenance

Warnings and Cautions

WARNING: Always disconnect AC power before working inside the monitor.

CAUTION: When working inside the monitor, be very careful not to dislodge any electrical wiring or pneumatic tubing. The HGMSZ contains sensitive electronic components that can be easily damaged. Be careful not to touch or disturb any of these components.

Charcoal Filter

The charcoal filter (Page 8) removes refrigerant gas from the purge-air stream during the purging process. Replace the charcoal filter (P/N 3015-4306) about every 6 months, when a zero filter fault occurs (fault code <0100>), or after the monitor itself has been exposed to unusually high levels of refrigerant gas, such as after an evacuation alarm.

Hydrophobic Filter

The hydrophobic filter (Page 8) prevents water from entering the IR detector. A zone flow fault will occur (fault code <0800>) if this filter should become blocked. Replace the hydrophobic filter as required (P/N 07-1650).

Servicing Air Lines

The gas sample line and optional exhaust line should be checked periodically for obvious signs of kinks, damage, and contamination. Replace the tubing as required (P/N 304-2743).

The gas sample line termination filter should be checked periodically and replaced when there are obvious signs of contamination. To service the filter simply remove it from the line and replace it with a new one (P/N 3015-3420).

Fuses

The HGMSZ is protected from electrical damage by two, 1 A, 250 V, type “F” fuses (Page 8). Carefully remove the fuses from their fuse clips and visually inspect each fuse for damage. Replace the fuses as required (P/N 04-2620).

Clock Battery

The clock battery (Page 8) maintains the correct date and time when AC power is not applied to the monitor. Replace this battery about every 2 years (P/N 204-0020).

Sample Pump

The sample pump (Page 8) draws the gas sample into the monitor, through the IR detector, and discharges the sample out the monitor’s exhaust port. When replacing the pump, remove its inlet and outlet tubing, disconnect the AC power wires from the pump itself, and remove pump from monitor. Install a new sample pump (P/N 3015-4239).

Instruction 3015-4256

25

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Hgmsz Halogen Gas Monitor Single Zone Installation / Operation / MaintenanceDeclaration of Conformity Table of Contents Entering Custom Refrigerant Calibration Values Hazard Symbols on Monitor How to Use This ManualSafety Precautions General Description Functional OverviewUnderstanding Monitoring Levels Response to the Presence of Multiple RefrigerantsSuggested Location of Sampling Point Locating the Monitor Installation ConsiderationsInspection Overview Connecting Gas Sample and Exhaust LinesMounting Instructions Tubing Considerations Connecting the Gas-Sample LineConnecting the Exhaust Line Interior Schematic Interior SchematicElectrical Wiring Connection Connecting External AlarmsMA Current Loop Interface Typical External Alarm Relay 1 WiringInstruction General Operation Front Panel Display and ControlsData Display Screen Initial Power UpDisplay Screens Function Screens R134A Calfactor Audible Alarm is OFF Working with System Faults Working with Gas AlarmsFault Codes Viewing the Fault LogEntering Custom Refrigerant Calibration Values Clearing the Stored PPM Log, Alarms & Faults DataReset to Factory Default Settings Second Diagnostic Screen First Diagnostic ScreenWorking with the Diagnos Function Keypad FunctionsScreen Display Working with the P-CHK FunctionWorking with the Calibration Function Calibration ProcedureAdjusting Calibration Factor Instruction Charcoal Filter Clock BatteryHydrophobic Filter Servicing Air LinesOptional Accessories Replacement Parts & Optional AccessoriesReplacement Parts Appendix Table of Recommended Alarm SettingsRegister Your Warranty by Visiting Service Warranty and ServiceWarranty Field Repair Return ProcedureHalon SpecificationsPage Bacharach, Inc Dart Road, Newnan GA Ph 678-423-2481 Fax

3015-4256 specifications

Bacharach 3015-4256 is a highly regarded integrated air quality monitor designed for both commercial and residential applications. This advanced device focuses on detecting and analyzing various air pollutants, ensuring that indoor environments remain healthy and safe for occupants. Its sleek, compact design allows for easy integration into any space, making it an ideal choice for those looking to enhance air quality without compromising aesthetics.

One of the standout features of the Bacharach 3015-4256 is its advanced sensor technology. Equipped with multiple sensors, it can accurately measure levels of carbon dioxide, volatile organic compounds, particulate matter, and humidity. This multi-faceted approach to air quality monitoring ensures comprehensive data collection, allowing users to assess and understand their indoor environment better. The sensors undergo rigorous calibration to maintain accuracy over time, which is critical for effective air quality management.

Another key characteristic of the Bacharach 3015-4256 is its real-time data reporting capabilities. The device continuously monitors air quality levels and provides instant feedback through an easy-to-read display. Users can view real-time updates on air quality metrics, helping them make informed decisions about ventilation and air purification needs. Additionally, the monitor can connect to a mobile app, enabling users to access data remotely, set alerts for specific pollutant levels, and track changes over time.

Safety and user-friendliness are central to the design of this air quality monitor. The device features simple installation guidelines, requiring minimal setup to start monitoring air quality effectively. It also incorporates user-friendly controls, allowing individuals to navigate through settings and features with ease.

Moreover, the Bacharach 3015-4256 is designed with energy efficiency in mind. It operates on low power consumption, making it not only cost-effective but also environmentally friendly.

In summary, the Bacharach 3015-4256 is a sophisticated air quality monitor that offers advanced sensor technology, real-time data reporting, ease of use, and energy-efficient design. Its blend of performance and practicality makes it a valuable tool for anyone committed to maintaining a healthy indoor environment.
Top Page Image Contents