Goldstar DHA4012DL, DH5010B Control, HOW to Operate Dehumidifier, HOW does the Dehumidifier WORK?

Page 5

1.5 CONTROL

Low High

 

5

4

6

 

3

7

 

 

 

2

8

Auto

1

9

Shut-Off

 

 

Fan Speed

Off

Max.

 

 

Humidity Control

Auto Shut-Off

Humidity Control

When you first use the dehumidifier, turn the humidity control to 5 or 6. If you still have moisture, turn the humidity control to a higher setting.

MAX is the highest setting.

When excess moisture and dampness odors are gone, adjust the control to a lower setting. Use the dehumidifier as long as excess moisture is present.

Fan Speed

Glows when the bucket is ready to be emptied, or when the bucket is removed or not replaced in the proper position.

The Water Level Control Switch shuts off the dehumidifier when the bucket is full, or when the bucket is removed or not replaced in the proper position.

1.6HOW TO OPERATE DEHUMIDIFIER

1.6.1HOW DOES THE DEHUMIDIFIER WORK?

Moist, humid air is drawn over a cold refrigerated dehumidifying coil. Moisture in the air condenses on this coil and drains into a bucket (or through the bucket into a hose and drain).

Dry, clean air is drawn over the condenser where it is actually heated several degrees and discharged out the front grille into the room.

It is normal for the surrounding air to become slightly warmer as the dehumidifier operates.

This warming effect further reduces the relative humidity of the surrounding air.

1.6.2 LOCATION FOR THE DEHUMIDIFIER

Allow at least 12 inches of space on all sides of the unit for good air circulation.

The dehumidifier must be operated in an enclosed area to be most effective.

Close all doors, windows and other outside openings to the room.

Place the dehumidifier in a location that does not restrict air flow into the rear coil or out the front grille.

A dehumidifier operating in a basement will have little or no effect in drying an adjacent enclosed storage area, such as a closet, unless there is adequate circulation of air in and out of the area.

The fan control adjusts the fan speed.

Set the fan control to HIGH for maximum moisture removal. When the humidity has been reduced and quiet operation is preferred, set the fan control to LOW.

Fan

Condenser

Evaporator

Dry

 

Humid

Air Out

 

Air In

Motor

 

 

 

 

Bucket

 

 

Drain

Compressor

Connection

 

Side View

Figure 1

Air In

12"

12"

Air Out

Figure 2

 

— 5—

Image 5
Contents Dehumidifier Contents Preface Safety PrecautionsFeatures Models SpecificationsDH3010B DH4010B DH5010B DHA3012D DHA4012D DHA5012DControl HOW to Operate DehumidifierHOW does the Dehumidifier WORK? Location for the DehumidifierAuto Defrost Micro SwitchHumidistat Capillary is needed. On opening the dryer, itDH3010B Circuit DiagramDescription QTY PER SET Marks Location Description QTYDH4010B DH5010B Motor RDMechanical Parts Disassembly InstructionsBucket and AIR Filter Front GrilleMicro Switch Assy Rotary SWITCH, Humidisat and Neon LampPower Cord Assy Control PartsShroud and Barrier FAN and MotorRefrigerating Cycle Rotary Compressor HOW to Replace the Refrigeration System Pulling Vacuum Possible Causes Remedy Troubleshooting GuideShuts off the compressor. The fan Condition Cause RemedyOr loose, replace the motor. If the motor Exploded View Introduction W0CZZ Model DH4010B/DHA4012DL, DH5010B/DHA5012DLTHERMOSTAT Control DH3010B/DHA3012DL Replacement Parts ListLocation Description Remark W0CZZ Capacitor 4995A20085J 4995A20085G 264110 Memo March

DH5010B, DHA5012DL, DHA4012DL, DH3010B, DHA3012DL specifications

The Goldstar DH3010B, DH5010B, DHA4012DL, DHA5012DL, and DHA3012DL are a series of cutting-edge home appliances designed to provide users with exceptional performance and convenience. Each model in this lineup caters to a specific need, whether it's air conditioning, heating, or a combination of both, making them suitable for a diverse range of environments.

The Goldstar DH3010B and DH5010B are notable for their sleek design paired with powerful performance. The DH3010B is an efficient air conditioning unit that prioritizes energy savings without sacrificing cooling power. It utilizes advanced compressor technology, ensuring rapid temperature reduction even in high-heat conditions. The DH5010B, on the other hand, is designed for larger spaces and boasts a higher BTU output, making it perfect for larger rooms or open areas. Both models feature user-friendly digital controls, allowing for easy adjustments to temperature settings and operational modes.

The DHA4012DL and DHA5012DL models stand out with their dual functionality as both air conditioners and heaters, providing year-round climate control. These devices are equipped with inverter technology that allows them to adjust power levels based on real-time needs, leading to significant energy efficiency. Users can enjoy a stable temperature, reduced energy bills, and minimal noise operation, creating a comfortable living environment.

The DHA3012DL model is designed with portability in mind, featuring wheels that allow users to easily move the unit from one room to another. It offers a compact design without compromising on output, making it ideal for individuals living in small apartments or those who desire flexibility in their cooling solutions. Additionally, all of these models incorporate state-of-the-art air purification systems, ensuring that the air circulated is clean and free from contaminants, which is crucial for maintaining a healthy home environment.

In conclusion, the Goldstar DH series offers a versatile range of air conditioning and heating solutions, blending modern technology with practical functionality. Their energy-efficient designs, user-friendly interfaces, and advanced features make them a smart choice for any home. Whether you need focused cooling for a small room or a comprehensive system to heat and cool larger spaces, these models deliver reliable performance and comfort throughout the year.